The 2023 MDPI Annual Report has
been released!
 
12 pages, 1465 KiB  
Article
Comparison of Various Theoretical Measures of Aromaticity within Monosubstituted Benzene
by Caleb K. Swain and Steve Scheiner
Molecules 2024, 29(10), 2260; https://doi.org/10.3390/molecules29102260 (registering DOI) - 11 May 2024
Abstract
The effects of monosubstitution on the aromaticity of benzene are assessed using a number of different quantitative schemes. The ability of the mobile π-electrons to respond to an external magnetic field is evaluated using several variants of the NICS scheme which calculate the [...] Read more.
The effects of monosubstitution on the aromaticity of benzene are assessed using a number of different quantitative schemes. The ability of the mobile π-electrons to respond to an external magnetic field is evaluated using several variants of the NICS scheme which calculate the shielding of points along the axis perpendicular to the molecule. Another class of measures is related to the drive toward the uniformity of C-C bond lengths and strengths. Several energetic quantities are devised to approximate an aromatic stabilization energy and the tendency of the molecule to maintain planarity. There is a lack of consistency in that the various measures of aromaticity lead to differing conclusions as to the effects of substituents on the aromaticity of the ring. Full article
(This article belongs to the Special Issue Fundamental Aspects of Chemical Bonding—2nd Edition)
Show Figures

Figure 1

20 pages, 814 KiB  
Article
Reconfigurable-Intelligent-Surface-Enhanced Dynamic Resource Allocation for the Social Internet of Electric Vehicle Charging Networks with Causal-Structure-Based Reinforcement Learning
by Yuzhu Zhang and Hao Xu
Future Internet 2024, 16(5), 165; https://doi.org/10.3390/fi16050165 (registering DOI) - 11 May 2024
Abstract
Charging stations and electric vehicle (EV) charging networks signify a significant advancement in technology as a frontier application of the Social Internet of Things (SIoT), presenting both challenges and opportunities for current 6G wireless networks. One primary challenge in this integration is limited [...] Read more.
Charging stations and electric vehicle (EV) charging networks signify a significant advancement in technology as a frontier application of the Social Internet of Things (SIoT), presenting both challenges and opportunities for current 6G wireless networks. One primary challenge in this integration is limited wireless network resources, particularly when serving a large number of users within distributed EV charging networks in the SIoT. Factors such as congestion during EV travel, varying EV user preferences, and uncertainties in decision-making regarding charging station resources significantly impact system operation and network resource allocation. To address these challenges, this paper develops a novel framework harnessing the potential of emerging technologies, specifically reconfigurable intelligent surfaces (RISs) and causal-structure-enhanced asynchronous advantage actor–critic (A3C) reinforcement learning techniques. This framework aims to optimize resource allocation, thereby enhancing communication support within EV charging networks. Through the integration of RIS technology, which enables control over electromagnetic waves, and the application of causal reinforcement learning algorithms, the framework dynamically adjusts resource allocation strategies to accommodate evolving conditions in EV charging networks. An essential aspect of this framework is its ability to simultaneously meet real-world social requirements, such as ensuring efficient utilization of network resources. Numerical simulation results validate the effectiveness and adaptability of this approach in improving wireless network efficiency and enhancing user experience within the SIoT context. Through these simulations, it becomes evident that the developed framework offers promising solutions to the challenges posed by integrating the SIoT with EV charging networks. Full article
(This article belongs to the Special Issue Social Internet of Things (SIoT))
Show Figures

Figure 1

15 pages, 2087 KiB  
Article
Quantitative Microvascular Change Analysis Using a Semi-Automated Software in Macula-off Rhegmatogenous Retinal Detachment Assessed by Swept-Source Optical Coherence Tomography Angiography
by Pablo Díaz-Aljaro, Javier Zarranz-Ventura, Laura Broc-Iturralde, Nevena Romanic-Bubalo, Ignacio Díaz-Aljaro, Zhongdi Chu, Ruikang K. Wang and Xavier Valldeperas
J. Clin. Med. 2024, 13(10), 2835; https://doi.org/10.3390/jcm13102835 (registering DOI) - 11 May 2024
Abstract
Objective: To analyze the performance of custom semi-automated software for quantitative analysis of retinal capillaries in eyes with macula-off rhegmatogenous retinal detachment (RRD) and the role of these microvascular measures as potential biomarkers of postoperative visual outcomes. Methods: A prospective, observational, [...] Read more.
Objective: To analyze the performance of custom semi-automated software for quantitative analysis of retinal capillaries in eyes with macula-off rhegmatogenous retinal detachment (RRD) and the role of these microvascular measures as potential biomarkers of postoperative visual outcomes. Methods: A prospective, observational, and single-center study was conducted on consecutive patients who underwent 25G pars-plana vitrectomy for primary uncomplicated macula-off RRD. Optical coherence tomography angiography (OCTA) was performed in the fellow and RRD eyes before surgery and in months 1, 3, and 6 after surgery. The preoperative values of the fellow eyes were used as surrogates of macula-off ones. The primary endpoints were the mean vessel diameter index (VDI); vessel area density (VAD); and vessel skeleton density (VSD) at month 6. Results: Forty-four eyes (44 patients) were included in the study. Considering the fellow eyes as a surrogate of preoperative values of macula-off eyes, VDI in superficial (SCP) and deep (DCP) capillary plexuses was significantly reduced at month 6 (p = 0.0087 and p = 0.0402, respectively); whereas VSD in SCP increased significantly from preoperative values (p = 0.0278). OCTA built-in software parameters were significantly reduced from month 1 to month 6 in both SCP and DCP (p values ranged between 0.0235 and <0.0001). At month 6, 25 (56.8%) eyes achieved a best-corrected visual acuity BCVA ≥ 0.3 (LogMAR). The greater the preoperative BCVA, the greater the probability of achieving good visual outcomes (Odds ratio: 11.06; p = 0.0037). However, none of the OCTA parameters were associated with the probability of achieving a BCVA improvement ≥ 0.3. Conclusions: Quantitative evaluation of capillary density and morphology through OCTA and semi-automated software represents a valuable tool for clinical assessment and managing the disease comprehensively. Full article
(This article belongs to the Special Issue Advancements and Challenges in Retina Surgery)
Show Figures

Figure 1

19 pages, 4584 KiB  
Article
Mobile Robot + IoT: Project of Sustainable Technology for Sanitizing Broiler Poultry Litter
by Alan Kunz Cechinel, Carlos Eduardo Soares, Sergio Genilson Pfleger, Leonardo Luiz Gambalonga Alves De Oliveira, Ederson Américo de Andrade, Claudia Damo Bertoli, Carlos Roberto De Rolt, Edson Roberto De Pieri, Patricia Della Méa Plentz and Juha Röning
Sensors 2024, 24(10), 3049; https://doi.org/10.3390/s24103049 (registering DOI) - 11 May 2024
Abstract
The traditional aviary decontamination process involves farmers applying pesticides to the aviary’s ground. These agricultural defenses are easily dispersed in the air, making the farmers susceptible to chronic diseases related to recurrent exposure. Industry 5.0 raises new pillars of research and innovation in [...] Read more.
The traditional aviary decontamination process involves farmers applying pesticides to the aviary’s ground. These agricultural defenses are easily dispersed in the air, making the farmers susceptible to chronic diseases related to recurrent exposure. Industry 5.0 raises new pillars of research and innovation in transitioning to more sustainable, human-centric, and resilient companies. Based on these concepts, this paper presents a new aviary decontamination process that uses IoT and a robotic platform coupled with ozonizer (O3) and ultraviolet light (UVL). These clean technologies can successfully decontaminate poultry farms against pathogenic microorganisms, insects, and mites. Also, they can degrade toxic compounds used to control living organisms. This new decontamination process uses physicochemical information from the poultry litter through sensors installed in the environment, which allows accurate and safe disinfection. Different experimental tests were conducted to construct the system. First, tests related to measuring soil moisture, temperature, and pH were carried out, establishing the range of use and the confidence interval of the measurements. The robot’s navigation uses a back-and-forth motion that parallels the aviary’s longest side because it reduces the number of turns, reducing energy consumption. This task becomes more accessible because of the aviaries’ standardized geometry. Furthermore, the prototype was tested in a real aviary to confirm the innovation, safety, and effectiveness of the proposal. Tests have shown that the UV + ozone combination is sufficient to disinfect this environment. Full article
19 pages, 14275 KiB  
Article
Crashworthiness Study of Functional Gradient Lattice-Reinforced Thin-Walled Tubes under Impact Loading
by Zeliang Liu, Yuan Wang, Xi Liang and Wei Yu
Materials 2024, 17(10), 2264; https://doi.org/10.3390/ma17102264 (registering DOI) - 11 May 2024
Abstract
Creating lightweight and impact-resistant box structures has been an enduring pursuit among researchers. A new energy-absorbing structure consisting of a bionic gradient lattice-enhanced thin-walled tube is presented in this article. The gradient lattice and thin-walled tube were prepared using selective laser melting (SLM) [...] Read more.
Creating lightweight and impact-resistant box structures has been an enduring pursuit among researchers. A new energy-absorbing structure consisting of a bionic gradient lattice-enhanced thin-walled tube is presented in this article. The gradient lattice and thin-walled tube were prepared using selective laser melting (SLM) and wire-cutting techniques, respectively. To analyze the effects of gradient pattern, mass ratio, diameter range and impact speed on structural crashworthiness, low-speed impact at 4 m/s and finite element simulation experiments were conducted. The study demonstrates that the design of inward radial gradient lattice-reinforced thin-walled tubes can effectively enhance structure’s energy-absorption efficiency and provide a more stable mode of deformation. It also shows a 17.44% specific energy-absorption advantage over the uniformly lattice-reinforced thin-walled tubes, with no significant overall gain in peak crushing force. A complex scale evaluation method was used to determine the optimum structure and the structure type with the best crashworthiness was found to be a gradient lattice-filled tube with a thickness of 0.9 mm and a slope index of 10. The gradient lattice-reinforced thin-walled tube suggested in this investigation offers guidance for designing a more efficient thin-walled energy-absorption structure. Full article
(This article belongs to the Topic Additive Manufacturing of Architected Metallic Materials)
Show Figures

Figure 1

19 pages, 4059 KiB  
Article
Adsorption of Cadmium and Lead Capacity and Environmental Stability of Magnesium-Modified High-Sulfur Hydrochar: Greenly Utilizing Chicken Feather
by Weiqi Deng, Xubin Kuang, Zhaoxin Xu, Deyun Li, Yongtao Li and Yulong Zhang
Toxics 2024, 12(5), 356; https://doi.org/10.3390/toxics12050356 (registering DOI) - 11 May 2024
Abstract
Chicken feathers represent a viable material for producing biochar adsorbents. Traditional slow pyrolysis methods often result in sulfur element losses from chicken feathers, whereas hydrothermal reactions generate substantial amounts of nutrient-rich hydrothermal liquor. Magnesium-modified high-sulfur hydrochar MWF was synthesized through magnesium modification, achieving [...] Read more.
Chicken feathers represent a viable material for producing biochar adsorbents. Traditional slow pyrolysis methods often result in sulfur element losses from chicken feathers, whereas hydrothermal reactions generate substantial amounts of nutrient-rich hydrothermal liquor. Magnesium-modified high-sulfur hydrochar MWF was synthesized through magnesium modification, achieving a S content of 3.68%. The maximum equilibrium adsorption amounts of MWF for Cd2+ and Pb2+ were 25.12 mg·g−1 and 70.41 mg·g−1, respectively, representing 4.00 times and 2.75 times of WF. Magnesium modification elevated the sulfur content, pH, ash content, and electronegativity of MWF. The primary mechanisms behind MWF’s adsorption of Cd2+ and Pb2+ involve magnesium ion exchange and complexation with C=O/O=C–O, quaternary N, and S functional groups. MWF maintains robust stability and antioxidative properties, even with low aromaticity levels. Given the lower energy consumption during hydrochar production, MWF offers notable carbon sequestration benefits. The hydrothermal solution derived from MWF is nutrient-rich. Following supplementation with inorganic fertilizer, the hydrothermal solution of MWF significantly enhanced bok choy growth compared to the control group. In general, adopting magnesium-modified hydrothermal reactions to produce hydrochar and converting the resultant hydrothermal solution into water-soluble fertilizer proves a viable strategy for the eco-friendly utilization of chicken feathers. This approach carries substantial value for heavy metal remediation and agricultural practices. Full article
(This article belongs to the Special Issue Techniques and Methods for Toxic Agent Analysis and Removal)
Show Figures

Figure 1

15 pages, 3706 KiB  
Article
Assessment of Microplastic Pollution in River Ecosystems: Effect of Land Use and Biotic Indices
by David Gutiérrez-Rial, Iria Villar, Romina Álvarez-Troncoso, Benedicto Soto, Salustiano Mato and Josefina Garrido
Water 2024, 16(10), 1369; https://doi.org/10.3390/w16101369 (registering DOI) - 11 May 2024
Abstract
The proximity of freshwater ecosystems to anthropogenic activities makes them one of the most threatened environments by plastic pollution in the form of microplastics (MPs). Therefore, it is crucial to identify the primary drivers of MP dynamics in rivers to enhance their management. [...] Read more.
The proximity of freshwater ecosystems to anthropogenic activities makes them one of the most threatened environments by plastic pollution in the form of microplastics (MPs). Therefore, it is crucial to identify the primary drivers of MP dynamics in rivers to enhance their management. This work analyzed the concentration of MPs in water and sediments and evaluated the influence of land use and its relationship with the main biotic indices employed to assess the water quality of rivers. This research was carried out in four different catchments, with three sampling points established in each river basin. The results revealed that MPs were ubiquitous across all locations, with concentrations ranging from 0.10 to 35.22 items m−3 in waters and from 26 to 643 items Kg−1 in sediments. The highest concentration of MPs both in water and sediments were found in the Lagares River (35.22 items m−3 and 643 items Kg−1), while the lowest concentrations were found in the Miñor River for water (0.10 items m−3) and Tea River for sediments (138 items Kg−1). Urbanization degree was identified as the primary driver of MP pollution in water, whereas population density correlated with sediment pollution levels. These findings explain the elevated MPs abundance in the more urbanized and populated Gafos and Lagares rivers compared to the relatively pristine Miñor and Tea rivers. Furthermore, the presence of MPs in sediments was found to negatively impact the most sensitive benthic macroinvertebrate taxa, as evidenced by lower values of the IASPT and EPT indices at sampling points with higher sediment MPs concentrations (Gafos and Lagares). Full article
(This article belongs to the Special Issue Water Quality Assessment of River Basins)
Show Figures

Figure 1

16 pages, 3752 KiB  
Article
Quantum Tunneling and Complex Dynamics in the Suris’s Integrable Map
by Yasutaka Hanada and Akira Shudo
Entropy 2024, 26(5), 414; https://doi.org/10.3390/e26050414 (registering DOI) - 11 May 2024
Abstract
Quantum tunneling in a two-dimensional integrable map is studied. The orbits of the map are all confined to the curves specified by the one-dimensional Hamiltonian. It is found that the behavior of tunneling splitting for the integrable map and the associated Hamiltonian system [...] Read more.
Quantum tunneling in a two-dimensional integrable map is studied. The orbits of the map are all confined to the curves specified by the one-dimensional Hamiltonian. It is found that the behavior of tunneling splitting for the integrable map and the associated Hamiltonian system is qualitatively the same, with only a slight difference in magnitude. However, the tunneling tails of the wave functions, obtained by superposing the eigenfunctions that form the doublet, exhibit significant differences. To explore the origin of the difference, we observe the classical dynamics in the complex plane and find that the existence of branch points appearing in the potential function of the integrable map could play the role of yielding non-trivial behavior in the tunneling tail. The result highlights the subtlety of quantum tunneling, which cannot be captured in nature only by the dynamics in the real plane. Full article
(This article belongs to the Special Issue Tunneling in Complex Systems)
19 pages, 3695 KiB  
Article
The Effect of Arm Movements on the Dynamics of the Wheelchair Frame during Manual Wheelchair Actuation and Propulsion
by Franz Konstantin Fuss, Adin Ming Tan and Yehuda Weizman
Actuators 2024, 13(5), 183; https://doi.org/10.3390/act13050183 (registering DOI) - 11 May 2024
Abstract
Wheelchair propulsion and actuation are influenced by the moving masses of the wheelchair user; however, the extent of this effect is still unclear. The main evidence of this effect is that the speed of the wheelchair frame continues to increase after the end [...] Read more.
Wheelchair propulsion and actuation are influenced by the moving masses of the wheelchair user; however, the extent of this effect is still unclear. The main evidence of this effect is that the speed of the wheelchair frame continues to increase after the end of the push phase. The wheelchair’s speed was measured using IMUs and the duration of the push period was recorded using miniaturised pressure sensors attached to the driver’s middle fingers. The velocity and acceleration were determined for various average stroke cycle speeds to determine the speed dependency of the acceleration. The wheelchair was then mounted on a force plate to measure the inertial forces of the hands moving back and forth. The aerodynamic drag and rolling resistance forces were determined from coast-down experiments. Based on the measured forces, the behaviour of the force and velocity profiles was finally modelled by gradually reducing the mass of the arms and thus their inertial force. The results showed that the wheelchair is accelerated throughout the push phase (except for a temporary deceleration in the middle of the push phase at higher velocities), and that this acceleration continues well after the push phase. In the second half of the recovery phase, the wheelchair decelerates. The horizontal inertial forces measured on the force plate are predominantly negative in the push phase and in the second half of the recovery phase, and positive in the first half of the push phase, and their impulse is zero due to the conservation of momentum. Modelling the wheelchair with moving masses showed that reducing the horizontal inertial forces has no effect on the driver’s propulsive force but reduces the velocity fluctuations. The main conclusion of this research is that the wheelchair user’s power should be calculated only from the pure propulsive force that is required in the push phase to overcome the dissipative forces and that enables the gain or loss in speed per stroke cycle, but not directly from the measured velocity. Full article
(This article belongs to the Section Actuators for Robotics)
24 pages, 2259 KiB  
Article
New Inhibitors of Bcr-Abl Based on 2,6,9-Trisubstituted Purine Scaffold Elicit Cytotoxicity in Chronic Myeloid Leukemia-Derived Cell Lines Sensitive and Resistant to TKIs
by Thalia Delgado, Denisa Veselá, Hana Dostálová, Vladimír Kryštof, Veronika Vojáčková, Radek Jorda, Alejandro Castro, Jeanluc Bertrand, Gildardo Rivera, Mario Faúndez, Miroslav Strnad, Christian Espinosa-Bustos and Cristian O. Salas
Pharmaceutics 2024, 16(5), 649; https://doi.org/10.3390/pharmaceutics16050649 (registering DOI) - 11 May 2024
Abstract
Bcr-Abl is an oncoprotein with aberrant tyrosine kinase activity involved in the progression of chronic myeloid leukemia (CML) and has been targeted by inhibitors such as imatinib and nilotinib. However, despite their efficacy in the treatment of CML, a mechanism of resistance to [...] Read more.
Bcr-Abl is an oncoprotein with aberrant tyrosine kinase activity involved in the progression of chronic myeloid leukemia (CML) and has been targeted by inhibitors such as imatinib and nilotinib. However, despite their efficacy in the treatment of CML, a mechanism of resistance to these drugs associated with mutations in the kinase region has emerged. Therefore, in this work, we report the synthesis of 14 new 2,6,9-trisubstituted purines designed from our previous Bcr-Abl inhibitors. Here, we highlight 11b, which showed higher potency against Bcr-Abl (IC50 = 0.015 μM) than imatinib and nilotinib and exerted the most potent antiproliferative properties on three CML cells harboring the Bcr-Abl rearrangement (GI50 = 0.7–1.3 μM). In addition, these purines were able to inhibit the growth of KCL22 cell lines expressing Bcr-AblT315I, Bcr-AblE255K, and Bcr-AblY253H point mutants in micromolar concentrations. Imatinib and nilotinib were ineffective in inhibiting the growth of KCL22 cells expressing Bcr-AblT315I (GI50 > 20 μM) compared to 11b–f (GI50 = 6.4–11.5 μM). Molecular docking studies explained the structure–activity relationship of these purines in Bcr-AblWT and Bcr-AblT315I. Finally, cell cycle cytometry assays and immunodetection showed that 11b arrested the cells in G1 phase, and that 11b downregulated the protein levels downstream of Bcr-Abl in these cells. Full article
(This article belongs to the Special Issue Current and Future Cancer Chemoprevention Strategies, 2nd Edition)
15 pages, 10284 KiB  
Article
Identifying the Quantitative Trait Locus and Candidate Genes of Traits Related to Milling Quality in Rice via a Genome-Wide Association Study
by Changmin Hu, Xinru Li, Mengyuan Zhang, Chunyu Jing, Mei Hai, Jiaming Shen, Qing Xu, Xiaojing Dang, Yingyao Shi, Erbao Liu and Jianhua Jiang
Plants 2024, 13(10), 1324; https://doi.org/10.3390/plants13101324 (registering DOI) - 11 May 2024
Abstract
Abstract Milling quality directly affects production efficiency in rice, which is closely related to the brown rice recovery (BRR), the milled rice recovery (MRR) and the head milled rice recovery (HMRR) [...] Full article
25 pages, 3042 KiB  
Article
Bibliometric and Visualization Analysis of the Literature on the Remote Sensing Inversion of Soil Salinization from 2000 to 2023
by Chengshen Yin, Quanming Liu, Teng Ma, Yanru Shi and Fuqiang Wang
Land 2024, 13(5), 659; https://doi.org/10.3390/land13050659 (registering DOI) - 11 May 2024
Abstract
Tracing the historical development of soil salinization and monitoring its current status are crucial for understanding the driving forces behind it, proposing strategies to improve soil quality, and predicting future trends. To comprehensively understand the evolution of research on the remote sensing inversion [...] Read more.
Tracing the historical development of soil salinization and monitoring its current status are crucial for understanding the driving forces behind it, proposing strategies to improve soil quality, and predicting future trends. To comprehensively understand the evolution of research on the remote sensing inversion of soil salinity, a scientific bibliometric analysis was conducted on research from the past two decades indexed in the core scientific databases. This article analyzes the field from various perspectives, including the number of publications, authors, research institutions and countries, research fields, study areas, and keywords, in order to reveal the current state-of-the-art and cutting-edge research in this domain. Special attention was given to topics such as machine learning, data assimilation methods, unmanned aerial vehicle (UAV) remote sensing technology, soil inversion under vegetation cover, salt ion inversion, and remote sensing model construction methods. The results indicate an overall increase in the volume of publications, with key authors such as Metternicht, Gi and Zhao, Gengxing, and major research institutions including the International Institute for Geoinformatics Science and Earth Observation and the Chinese Academy of Sciences making significant contributions. Notably, China and the USA have made substantial contributions to this field, with research areas extending from Inner Mongolia’s Hetao irrigation district to the Mediterranean region. Research in the remote sensing domain focuses on various methods, including hyperspectral imaging for salinized soil inversion, with an increasing emphasis on machine learning. This study enriches researchers’ knowledge of the current trends and future directions of remote sensing inversion of soil salinization. Full article
(This article belongs to the Special Issue Salinity Monitoring and Modelling at Different Scales)
13 pages, 283 KiB  
Article
Stability of the Borell–Brascamp–Lieb Inequality for Multiple Power Concave Functions
by Meng Qin, Zhuohua Zhang, Rui Luo, Mengjie Ren and Denghui Wu
Axioms 2024, 13(5), 320; https://doi.org/10.3390/axioms13050320 (registering DOI) - 11 May 2024
Abstract
In this paper, we prove the stability of the Brunn–Minkowski inequality for multiple convex bodies in terms of the concept of relative asymmetry. Using these stability results and the relationship of the compact support of functions, we establish the stability of the Borell–Brascamp–Lieb [...] Read more.
In this paper, we prove the stability of the Brunn–Minkowski inequality for multiple convex bodies in terms of the concept of relative asymmetry. Using these stability results and the relationship of the compact support of functions, we establish the stability of the Borell–Brascamp–Lieb inequality for multiple power concave functions via relative asymmetry. Full article
(This article belongs to the Special Issue Advances in Convex Geometry and Analysis)
6 pages, 516 KiB  
Editorial
Plant-Growth-Promoting Bacteria
by Carmen Bianco
Plants 2024, 13(10), 1323; https://doi.org/10.3390/plants13101323 (registering DOI) - 11 May 2024
Abstract
Global food-production levels may soon be insufficient for feeding the population, and changing climatic conditions could further limit agri-food production [...] Full article
(This article belongs to the Special Issue Plant Growth Promoting Bacteria)
Show Figures

Figure 1

12 pages, 1560 KiB  
Article
Uncertainty Reduction in Operational Risk Management Process
by Guy Burstein and Inon Zuckerman
Risks 2024, 12(5), 77; https://doi.org/10.3390/risks12050077 (registering DOI) - 11 May 2024
Abstract
This paper proposes a new framework to reduce the variance and uncertainty in the risk assessment process. Today, this process is susceptible to background noise from sources of human factor biases and erroneous measurements. Our new framework consists of deconstructing the likelihood of [...] Read more.
This paper proposes a new framework to reduce the variance and uncertainty in the risk assessment process. Today, this process is susceptible to background noise from sources of human factor biases and erroneous measurements. Our new framework consists of deconstructing the likelihood of failure function into its sub-factor and then reconstructing it in a formula that can reduce the variance and biases of a human auditor judgment. We tested our new framework on both a questionnaire study and a simulation of the risk assessment process, and the improvement in reducing the variance is significant. Full article
(This article belongs to the Special Issue Financial Analysis, Corporate Finance and Risk Management)
Show Figures

Figure 1

10 pages, 427 KiB  
Article
Adding Branched-Chain Amino Acids and Vitamin D to Whey Protein Is More Effective than Protein Alone in Preserving Fat Free Mass and Muscle Strength in the First Month after Sleeve Gastrectomy
by Luigi Schiavo, Biagio Santella, Barbara Paolini, Farnaz Rahimi, Emmanuele Giglio, Barbara Martinelli, Stefano Boschetti, Lilia Bertolani, Katia Gennai, Simone Arolfo, Maria Paola Bertani and Vincenzo Pilone
Nutrients 2024, 16(10), 1448; https://doi.org/10.3390/nu16101448 (registering DOI) - 11 May 2024
Abstract
Objectives: Sleeve gastrectomy (SG) is one of the most commonly performed weight loss (WL) bariatric procedures. The main goal of WL is reducing total body weight (TBW) and fat mass (FM). However, TBW loss is systematically accompanied by a decline in fat-free mass [...] Read more.
Objectives: Sleeve gastrectomy (SG) is one of the most commonly performed weight loss (WL) bariatric procedures. The main goal of WL is reducing total body weight (TBW) and fat mass (FM). However, TBW loss is systematically accompanied by a decline in fat-free mass (FFM), predominantly in the first post-surgical month, despite protein supplementation. Branched-chain amino acids (BCAAs) and vitamin D seem to attenuate loss of FFM and, thus, reduce the decline in muscle strength (MS). However, data on the role of an integrated supplementation with whey protein plus BCAAs plus vitamin D (P+BCAAs+Vit.D) vs. protein alone on total weight loss (TWL), fat mass (FM), fat-free mass (FFM), and (MS) in the first month after SG are lacking. Therefore, the present study aims to evaluate the impact of P+BCAAs+Vit.D vs. protein alone supplementation on TWL, FM, FFM, and MS in the first month after SG. Materials and Methods: Before SG and at 1 month afterward, we prospectively measured and compared TBW, FM, FFM, and MS in 57 patients who received either a supplementation with P+BCAAs+Vit.D (n = 31) or protein alone (n = 26). The impact of P+BCAAs+Vit.D and protein alone supplementation on clinical status was also evaluated. Results: Despite non-significant variation in TBW, FM decreased more significantly (18.5% vs. 13.2%, p = 0.023) with the P+BCAA+Vit.D supplementation compared to protein alone. Furthermore, the P+BCAA+Vit.D group showed a significantly lower decrease in FFM (4.1% vs. 11.4%, p < 0.001) and MS (3.8% vs. 18.5%, p < 0.001) compared to the protein alone group. No significant alterations in clinical status were seen in either group. Conclusion: P+BCAA+Vit.D supplementation is more effective than protein alone in determining FM loss and is associated with a lower decrease in FFM and MS, without interfering with clinical status in patients 1 month after SG. Full article
(This article belongs to the Section Clinical Nutrition)
14 pages, 1474 KiB  
Communication
Clinical Effect Analysis of Wearable Sensor Technology-Based Gait Function Analysis in Post-Transcranial Magnetic Stimulation Stroke Patients
by Litong Wang, Likai Wang, Zhan Wang, Fei Gao, Jingyi Wu and Hong Tang
Sensors 2024, 24(10), 3051; https://doi.org/10.3390/s24103051 (registering DOI) - 11 May 2024
Abstract
(1) Background: This study evaluates the effectiveness of low-frequency repetitive transcranial magnetic stimulation (LF-rTMS) in improving gait in post-stroke hemiplegic patients, using wearable sensor technology for objective gait analysis. (2) Methods: A total of 72 stroke patients were randomized into control, sham stimulation, [...] Read more.
(1) Background: This study evaluates the effectiveness of low-frequency repetitive transcranial magnetic stimulation (LF-rTMS) in improving gait in post-stroke hemiplegic patients, using wearable sensor technology for objective gait analysis. (2) Methods: A total of 72 stroke patients were randomized into control, sham stimulation, and LF-rTMS groups, with all receiving standard medical treatment. The LF-rTMS group underwent stimulation on the unaffected hemisphere for 6 weeks. Key metrics including the Fugl-Meyer Assessment Lower Extremity (FMA-LE), Berg Balance Scale (BBS), Modified Barthel Index (MBI), and gait parameters were measured before and after treatment. (3) Results: The LF-rTMS group showed significant improvements in the FMA-LE, BBS, MBI, and various gait parameters compared to the control and sham groups (p < 0.05). Specifically, the FMA-LE scores improved by an average of 5 points (from 15 ± 3 to 20 ± 2), the BBS scores increased by 8 points (from 35 ± 5 to 43 ± 4), the MBI scores rose by 10 points (from 50 ± 8 to 60 ± 7), and notable enhancements in gait parameters were observed: the gait cycle time was reduced from 2.05 ± 0.51 s to 1.02 ± 0.11 s, the stride length increased from 0.56 ± 0.04 m to 0.97 ± 0.08 m, and the walking speed improved from 35.95 ± 7.14 cm/s to 75.03 ± 11.36 cm/s (all p < 0.001). No adverse events were reported. The control and sham groups exhibited improvements but were not as significant. (4) Conclusions: LF-rTMS on the unaffected hemisphere significantly enhances lower-limb function, balance, and daily living activities in subacute stroke patients, with the gait parameters showing a notable improvement. Wearable sensor technology proves effective in providing detailed, objective gait analysis, offering valuable insights for clinical applications in stroke rehabilitation. Full article
(This article belongs to the Special Issue Novel Wearable Sensors and Digital Applications)
17 pages, 6703 KiB  
Article
Additively Manufactured Bionic Corrugated Lightweight Honeycomb Structures with Controlled Deformation Load-Bearing Properties
by Jie Li, Han Wang, Xianghao Kong, Zhiwei Jiao and Weimin Yang
Materials 2024, 17(10), 2274; https://doi.org/10.3390/ma17102274 (registering DOI) - 11 May 2024
Abstract
The rapid development of additive manufacturing (AM) has facilitated the creation of bionic lightweight, energy-absorbing structures, enabling the implementation of more sophisticated internal structural designs. For protective structures, the utilization of artificially controlled deformation patterns can effectively reduce uncertainties arising from random structural [...] Read more.
The rapid development of additive manufacturing (AM) has facilitated the creation of bionic lightweight, energy-absorbing structures, enabling the implementation of more sophisticated internal structural designs. For protective structures, the utilization of artificially controlled deformation patterns can effectively reduce uncertainties arising from random structural damage and enhance deformation stability. This paper proposed a bionic corrugated lightweight honeycomb structure with controllable deformation. The force on the onset state of deformation of the overall structure was investigated, and the possibility of controlled deformation in the homogeneous structure was compared with that in the corrugated structure. The corrugated structures exhibited a second load-bearing capacity wave peak, with the load-bearing capacity reaching 60.7% to 117.29% of the first load-bearing peak. The damage morphology of the corrugated structure still maintained relative integrity. In terms of energy absorption capacity, the corrugated lightweight structure has a much stronger energy absorption capacity than the homogeneous structure due to the second peak of the load carrying capacity. The findings of this study suggested that the combination of geometric customization and longitudinal corrugation through additive manufacturing offers a promising approach for the development of high-performance energy-absorbing structures. Full article
(This article belongs to the Section Materials Simulation and Design)
Show Figures

Figure 1

24 pages, 577 KiB  
Review
Promotion of Healthy Habits in University Students: Literature Review
by Sara Puente-Hidalgo, Camino Prada-García, José Alberto Benítez-Andrades and Elena Fernández-Martínez
Healthcare 2024, 12(10), 993; https://doi.org/10.3390/healthcare12100993 (registering DOI) - 11 May 2024
Abstract
The increase in responsibilities, together with the multiple challenges that students face in the university period, has a direct impact on their healthy lifestyles. This literature review describes the benefits of promoting healthy habits in college, highlighting the fundamental role of prevention and [...] Read more.
The increase in responsibilities, together with the multiple challenges that students face in the university period, has a direct impact on their healthy lifestyles. This literature review describes the benefits of promoting healthy habits in college, highlighting the fundamental role of prevention and promotion. A systematic review was carried out following the PRISMA recommendations, searching for information in the WOS and Scopus databases. On the other hand, a search was carried out within the existing and available grey literature. The review focused on finding information about physical activity, nutrition, and stress (with an emphasis on resilience and academic burnout) in university students. This bibliographic review includes 32 articles and six web pages, containing information on the benefits of physical activity, healthy habits, and health prevention. The information collected in this study shows that university students are exposed to multiple changes during this period, increasing as the academic years progress. At that time, their habits worsen, with low adherence to the Mediterranean diet, low physical activity, and high levels of stress, specifically increasing cases of academic burnout. The establishment of healthy habits during the university period is necessary, observing an improvement in all the variables studied. Prevention has played a fundamental role. Full article
Show Figures

Figure 1

15 pages, 4197 KiB  
Article
Repeatability of Hydroacoustic Results versus Uncertainty in Assessing Changes in Ecological Status Based on Fish: A Case Study of Lake Widryńskie (Poland)
by Andrej Hutorowicz
Water 2024, 16(10), 1368; https://doi.org/10.3390/w16101368 (registering DOI) - 11 May 2024
Abstract
Assessments of changes in the ecological state of aquatic ecosystems are always burdened with uncertainty, which results from environmental reasons and poor repeatability of measurement results of elements enabling the assessment. This study determines the uncertainty related to the elements of the assessment [...] Read more.
Assessments of changes in the ecological state of aquatic ecosystems are always burdened with uncertainty, which results from environmental reasons and poor repeatability of measurement results of elements enabling the assessment. This study determines the uncertainty related to the elements of the assessment of the hydroacoustic structure of fish communities’ (1) vertical target strength distribution (TS) in two-meter layers of water and (2) changes in the area where fish were recorded (which was determined on the basis of maps of their distribution in 2 m deep water layers). The object of this study was a lake (depth: 27 m) in which at the end of June 2016 the O2 concentration was <1.4 mg L−1 below 8 m depth, which resulted in the accumulation of fish to a depth of 6 m. Hydroacoustic acquisition was carried out along transects arranged in the east–west (WE), north–south (NS), and zigzag (ZZ) directions in three repetitions. It was shown that the empirical probability of obtaining statistically different results was 2/9 when (1) Kendall’s τ coefficient, used to determine the similarity of the TS distribution, was less than 0.7—moderate correlation—and (2) fish occurrence areas in two cases (WE and ZZ on the third day of research) in layers 2–4 m and 4–6 m differed statistically significantly from the average area for all repetitions by 10–14% and 56–66% (p < 0.05), respectively. The obtained results indicate quite good repeatability of acoustic measurements; however, in order to reduce the uncertainty, it is recommended that tests be conducted in this type of lake in three series of measurements. Full article
Show Figures

Figure 1

12 pages, 3006 KiB  
Article
Effect of Moisture Content and Wet–Dry Cycles on the Strength Properties of Unsaturated Clayey Sand
by Chuan Wang, Weimin Yang, Ning Zhang, Senwei Wang, Chuanyi Ma, Meixia Wang and Zhiyuan Zhang
Buildings 2024, 14(5), 1375; https://doi.org/10.3390/buildings14051375 (registering DOI) - 11 May 2024
Abstract
Based on the actual situation of the project on the Weihai–Yanhai Expressway section of Rongwu Expressway, the effects of water content change and the dry–wet cycle on the mechanical behavior of unsaturated clayey sandy soil were analyzed in this study. In this study, [...] Read more.
Based on the actual situation of the project on the Weihai–Yanhai Expressway section of Rongwu Expressway, the effects of water content change and the dry–wet cycle on the mechanical behavior of unsaturated clayey sandy soil were analyzed in this study. In this study, ventilated undrained triaxial shear tests were carried out on unsaturated clayey sandy soils with different water contents (6%, 8%, 10%, 12%, 14% and 16%). Concurrently, the soil samples were subjected to three distinct wet and dry cycle pathways (2~22%, 2~12%, and 12~22%) to gain an understanding of how the mechanical features of the soil changed under the different conditions. The test findings demonstrate that when the water content increases, the unsaturated clayey sandy soil’s cohesiveness and shear strength diminish. The strength of shear decline exhibits a pattern of first being quick, followed by sluggish. The strength of shear and cohesiveness of clayey sandy soil declined under the influence of the dry and wet cycles, with the first cycle primarily affecting variations in cohesiveness and strength of shear. Furthermore, the strength of shear and cohesiveness of clayey sandy soil diminish more with increasing wet and dry cycle amplitude and upper water content limits. Lastly, the drying shrinkage and hygroscopic expansion of clay particles in clayey sandy soils during wet and dry cycles are not significant, resulting in less structural damage and deterioration of the mechanical properties of the soils. The study’s findings have a significant impact on the durability of roadbeds made of unsaturated clayey sandy soil in both wet and dry situations. Full article
Show Figures

Figure 1

20 pages, 2545 KiB  
Article
Coastal Eukaryotic Plankton Diversity of the Southern Adriatic as Revealed by Metabarcoding
by Ana Baricevic, Tjasa Kogovsek, Mirta Smodlaka Tankovic, Lana Grizancic, Mia Knjaz, Ivan Vlasicek, Ivan Podolsak, Natasa Kuzat, Martin Pfannkuchen and Daniela Maric Pfannkuchen
Diversity 2024, 16(5), 293; https://doi.org/10.3390/d16050293 (registering DOI) - 11 May 2024
Abstract
Plankton studies serve as a basis for marine ecosystem research, but knowledge of marine plankton is still incomplete due to its extreme taxonomic and functional complexity. The application of metabarcoding is very valuable for the characterisation of the plankton community. The plankton community [...] Read more.
Plankton studies serve as a basis for marine ecosystem research, but knowledge of marine plankton is still incomplete due to its extreme taxonomic and functional complexity. The application of metabarcoding is very valuable for the characterisation of the plankton community. The plankton community of the Southern Adriatic is subject to strong environmental fluctuations and changes, which underlines the need for frequent, reliable and comprehensive characterisation of the plankton. The aim of this study was to determine the taxonomic composition and seasonal distribution of eukaryotic plankton in the Southern Adriatic. Plankton samples were collected monthly for one year at the coastal station of the Southern Adriatic and metabarcoding was used for taxonomic identification. The results showed a high taxonomic diversity and dynamic seasonal distribution patterns for both the protist and metazoan plankton communities. Metabarcoding revealed both the core, year-round plankton community and previously unrecorded plankton organisms in the Southern Adriatic. The results provide for the first time a comprehensive overview of the plankton community in this area by metabarcoding. The identified seasonal patterns of plankton genera and species in the Southern Adriatic will contribute to the understanding of plankton interactions and future changes in community diversity characterisation. Full article
(This article belongs to the Special Issue Biodiversity and Ecology in the Mediterranean Sea)
11 pages, 1097 KiB  
Article
Cartilage Collagen Neoepitope C2C Expression in the Articular Cartilage and Its Relation to Joint Tissue Damage in Patients with Knee Osteoarthritis
by Taavi Torga, Siim Suutre, Kalle Kisand, Marina Aunapuu and Andres Arend
Biomedicines 2024, 12(5), 1063; https://doi.org/10.3390/biomedicines12051063 (registering DOI) - 11 May 2024
Abstract
Pathological cleavage of type II collagen (Col2) and generation of Col2 neoepitopes can serve as useful molecular markers of the progression of osteoarthritis (OA). One of such potential biomarkers is type II collagen neoepitope C2C. The aim of this study was to correlate [...] Read more.
Pathological cleavage of type II collagen (Col2) and generation of Col2 neoepitopes can serve as useful molecular markers of the progression of osteoarthritis (OA). One of such potential biomarkers is type II collagen neoepitope C2C. The aim of this study was to correlate the degree of articular cartilage damage in OA patients with C2C expression in histological samples of tissues removed during total knee replacement. Cartilage samples were obtained from 27 patients ranging in age from 55 to 66 years. In each patient, medial and lateral tibia plateau samples were analyzed according to the OARSI histopathology grading system. The C2C expression was evaluated on histological slides by semi-quantitative analysis using ImageJ Fiji 2.14.0 software. Spearman’s rank correlation analysis revealed a positive weak correlation (rho = 0.289, p = 0.0356) between the histological grade of tissue damage and the percentage of C2C staining. In addition, a highly significant positive correlation (rho = 0.388, p = 0.0041) was discovered between the osteoarthritis score (combining the histological grade of damage with the OA macroscopic stage) and the percentage of C2C staining in the samples. The C2C expression was detected in all the regions of the articular cartilage (i.e., the superficial zone, mid zone, deep zone and tidemark area, and the zone of calcified cartilage). Our findings imply that local expression of C2C correlates with the articular cartilage damage in OA-affected knees. This confirms that C2C can be used as a prospective marker for assessing pathological changes in the OA course and OA clinical trials. Full article
(This article belongs to the Special Issue Molecular Research on Osteoarthritis and Osteoporosis)

Open Access Journals

Browse by Indexing Browse by Subject Selected Journals
Back to TopTop