In the area of drug research, several computational drug repurposing studies have highlighted candidate repurposed drugs, as well as clinical trial studies that have tested/are testing drugs in different phases. To the best of our knowledge, the aggregation of the proposed lists of drugs by previous studies has not been extensively exploited towards generating a dynamic reference matrix with enhanced resolution. To fill this knowledge gap, we performed weight-modulated majority voting of the modes of action, initial indications and targeted pathways of the drugs in a well-known repository, namely the Drug Repurposing Hub. Our method, D^Re^Amocracy, exploits this pile of information and creates frequency tables and, finally, a disease suitability score for each drug from the selected library. As a testbed, we applied this method to a group of neurodegenerative diseases (Alzheimer’s, Parkinson’s, Huntington’s disease and Multiple Sclerosis). A super-reference table with drug suitability scores has been created for all four neurodegenerative diseases and can be queried for any drug candidate against them. Top-scored drugs for Alzheimer’s Disease include agomelatine, mirtazapine and vortioxetine; for Parkinson’s Disease, they include apomorphine, pramipexole and lisuride; for Huntington’s, they include chlorpromazine, fluphenazine and perphenazine; and for Multiple Sclerosis, they include zonisamide, disopyramide and priralfimide. Overall, D^Re^Amocracy is a methodology that focuses on leveraging the existing drug-related experimental and/or computational knowledge rather than a predictive model for drug repurposing, offering a quantified aggregation of existing drug discovery results to (1) reveal trends in selected tracks of drug discovery research with increased resolution that includes modes of action, targeted pathways and initial indications for the investigated drugs and (2) score new candidate drugs for repurposing against a selected disease. Full article

Fibroin–chitosan composites, especially those containing nanohydroxyapatite, show potential for bone tissue regeneration. The physicochemical properties of these biocomposites depend on the compatibility between their components. In this study, the intermolecular interactions of fibroin and chitosan were analyzed using a molecular dynamics approach. Two types of systems were investigated: one containing acetic acid and the other containing calcium (Ca²⁺) and hydrogen phosphate (HPO₄²⁻) ions mimicking hydroxyapatite conditions. After obtaining the optimal equilibrium structures, the distributions of several types of interactions, including hydrogen bonds, ionic contacts, and hydrophobic contacts, along with structural and energetical features, were examined. The calculated binding energy values for the fibroin–chitosan complexes confirm their remarkable stability. The high affinity of fibroin for chitosan can be explained by the formation of a dense network of interactions between the considered biopolymers. These interactions were found to primarily be hydrogen bonds and ionic contacts involving ALA, ARG, ASN, ASP, GLN, GLU, GLY, LEU, PRO, SER, THR, TYR, and VAL residues. As established, the complexation of fibroin with chitosan maintains the β-sheet conformation of the peptide. β-Sheet fragments in fibroin are involved in the formation of a significant number of hydrogen bonds and ionic contacts with chitosan. Full article

With the rising incidence of various diseases in China and the constant development of the pharmaceutical industry, there is a growing demand for floxacin-type antibiotics. Due to the large-scale production and high cost of waste treatment, the parent drug and its metabolites constantly enter the water environment through domestic sewage, production wastewater, and other pathways. In recent years, the pollution of the aquatic environment by floxacin has become increasingly serious, making the technology to degrade floxacin in the aquatic environment a research hotspot in the field of environmental science. Metal–organic frameworks (MOFs), as a new type of porous material, have attracted much attention in recent years. In this paper, four photocatalytic materials, MIL-53(Fe), NH₂-MIL-53(Fe), MIL-100(Fe), and g-C₃N₄, were synthesised and applied to the study of the removal of ofloxacin and enrofloxacin. Among them, the MIL-100(Fe) material exhibited the best photocatalytic effect. The degradation efficiency of ofloxacin reached 95.1% after 3 h under visible light, while enrofloxacin was basically completely degraded. The effects of different materials on the visible photocatalytic degradation of the floxacin were investigated. Furthermore, the photocatalytic mechanism of enrofloxacin and ofloxacin was revealed by the use of three trappers (®O₂⁻, h⁺, and ®OH), demonstrating that the role of ®O₂⁻ promoted the degradation effect of the materials under photocatalysis. Full article

Diffusion tensor imaging (DTI) enables the assessment of changes in brain tissue microstructure during maturation and ageing. In general, patterns of cerebral maturation and decline render non-monotonic lifespan trajectories of DTI metrics with age, and, importantly, the rate of microstructural changes is heterochronous for various white matter fibres. Recent studies have demonstrated that diffusion kurtosis imaging (DKI) metrics are more sensitive to microstructural changes during ageing compared to those of DTI. In a previous work, we demonstrated that the Cohen’s d of mean diffusional kurtosis (d_MK) represents a useful biomarker for quantifying maturation heterochronicity. However, some inferences on the maturation grades of different fibre types, such as association, projection, and commissural, were of a preliminary nature due to the insufficient number of fibres considered. Hence, the purpose of this follow-up work was to further explore the heterochronicity of microstructural maturation between pre-adolescence and middle adulthood based on DTI and DKI metrics. Using the effect size of the between-group parametric changes and Cohen’s d, we observed that all commissural fibres achieved the highest level of maturity, followed by the majority of projection fibres, while the majority of association fibres were the least matured. We also demonstrated that d_MK strongly correlates with the maxima or minima of the lifespan curves of DTI metrics. Furthermore, our results provide substantial evidence for the existence of spatial gradients in the timing of white matter maturation. In conclusion, our data suggest that DKI provides useful biomarkers for the investigation of maturation spatial heterogeneity and heterochronicity. Full article

Brown rice is a familiar whole grain in Japan. We examined national trends in brown rice consumption among Japanese adults aged ≥20 years old, using individual-level data from the National Health and Nutrition Surveys conducted between 2012 and 2019. We employed multivariable logistic regression to identify factors associated with brown rice consumption. The 95th percentile of daily brown rice intake remained at 0.0 g throughout the study period. The percentage of brown rice consumers increased from 1.8% (95% confidence interval: 1.6–2.1) in 2012 to 2.6% (95% confidence interval: 2.0–3.4) in 2019. Compared with individuals who consumed only white rice, brown rice consumers had significantly higher mean intake levels of macronutrients, legumes, vegetables, fruits, and nuts. Brown rice consumption was positively associated with certain sociodemographic characteristics (being female, older age, residing in a major city, living without very young children, and having higher education levels) and health behaviors (lower body mass index, engaging in regular exercise, and being a former or never smoker). Despite its potential nutritional benefits in balanced diets, only a small fraction of adults in Japan consume brown rice, indicating a need for further promotion, particularly among individuals with characteristics associated with brown rice consumption. Full article

This study investigated the interplay between exit selection models and local pedestrian movement patterns within floor field frameworks. Specifically, this investigation analysed the performance of a multinomial logit exit choice model, incorporating both expected utility theory and cumulative prospect theory frameworks when coupled with three distinct local-level pedestrian movement models (FF-Von Neumann, FF-Moore, and NSFF). The expected utility theory framework considers the deterministic component as a linear relationship, while the cumulative prospect theory framework further considers the decision-maker’s risky attitudes by transforming objective terms into subjective terms using a power value function. The core objective was to comprehend how local movement dynamics, as represented by the floor field models, influence decision-making during exit selection. Comparative analyses revealed intriguing variations between the three local models, despite their shared expected utility theory-based exit choice framework. These discrepancies stemmed from the diverse pedestrian trajectory behaviours generated by each model. Consequently, these local dynamics impacted the decision-maker’s assessment of critical factors, such as the number of evacuees close to the decision-maker ($NCDM$) and the number of evacuees close to an exit ($NCE$), which the exit choice model incorporates. These assessments, in turn, significantly affected higher-level decision-making. The integration of the three models with the multinomial logit exit choice model, using either cumulative prospect theory and expected utility theory frameworks, further strengthened the observed bilateral relationship. While the specific nature of this relationship varied depending on the chosen framework and its implementation details, these consistent findings demonstrate the robustness of the results. This reinforced the influence of local-level pedestrian dynamics on higher-level exit selection, highlighting the importance of accurate crowd dynamics modelling, especially when advanced exit choice models consider local movement factors. Full article

The influence of wettability on the permeability performance of water–oil two-phase flow has attracted increasing attention. Dispersed flow and stratified flow are two flow regimes for water–oil two-phase flow in capillary fractures. The theoretical models of relative permeability considering wettability were developed for these two water–oil flow regimes from the momentum equations of the two-fluid model. Wettability coefficients were proposed to study the impact of wettability on relative permeabilities. Experiments were conducted to study the relative permeabilities of laminar water–oil two-phase flow in water-saturated and oil-saturated horizontal capillary fractures with different hydraulic diameters. These fractures were made of polymethylmethacrylate (PMMA) and polytetrafluoroethylene (PTFE), which had different surface wettabilities. In this experiment, the regimes are dispersed flow and stratified flow. The results show that the effect of wettability on the relative permeabilities increases as the hydraulic diameters of capillary fractures decrease for water–oil two-phase flow. The relative permeabilities in a water-saturated capillary fracture are higher than those in an oil-saturated capillary fracture of the same material. The relative permeabilities in a PTFE capillary fracture are larger than those in a PMMA capillary fracture under the same saturated condition. Wettability has little effect on the permeability performances of water–oil two-phase flow in water-saturated capillary fractures, but is significant for those in oil-saturated capillary fractures. Full article

Millimeter-Wave Radar is one promising sensor to achieve robust perception against challenging observing conditions. In this paper, we propose a Radar Inertial Odometry (RIO) pipeline utilizing a long-range 4D millimeter-wave radar for autonomous vehicle navigation. Initially, we develop a perception frontend based on radar point cloud filtering and registration to estimate the relative transformations between frames reliably. Then an optimization-based backbone is formulated, which fuses IMU data, relative poses, and point cloud velocities from radar Doppler measurements. The proposed method is extensively tested in challenging on-road environments and in-the-air environments. The results indicate that the proposed RIO can provide a reliable localization function for mobile platforms, such as automotive vehicles and Unmanned Aerial Vehicles (UAVs), in various operation conditions. Full article

Graphene hybrid-filler polymer composites have emerged as prominent materials that revolutionize heavy industries. This review paper encapsulates an in-depth analysis of different influential factors, such as filler/graphene type, aspect ratios, dispersion methods, filler-matrix compatibility, fiber orientation, synergistic effects, different processing techniques, and post-curing conditions, which affect the processing and properties of graphene hybrid polymer composites, as well as their resultant applications. Additionally, it discusses the substantial role of graphene reinforcement with other fillers, such as carbon nanotubes, silica, nano-clays, and metal oxides, to produce functionalized hybrid polymer composites with synergistically enhanced tailored properties, offering solutions for heavy industries, including aerospace, automotive, electronics, and energy harvesting. This review concludes with some suggestions and an outlook on the future of these composite materials by emphasizing the need for continued research to fully optimize their potential. Full article

Thermal energy storage (TES) using phase change materials (PCMs) is one of the potential solutions for stockpiling thermal energy and utilizing it for different applications, which results in effective energy usage. The main drawback of organic PCMs in practical applications is poor heat transfer due to low thermal conductivity (TC). Therefore, investigations into nano-enhanced PCMs are being explored to improve their thermophysical properties. In this work, the various thermophysical characteristics of nano-enhanced lauryl alcohol as a PCM were investigated using carbon-based and metallic nanoparticles. The results indicated that the addition of nanoparticles improved its thermal properties and affected other physical properties, such as viscosity. The latent heat was degraded with the addition of nanoparticles. The results revealed that by adding MWCNTs and CuO nanoparticles, a maximum of 82.6% and 49.6% improvement in TC was achieved, respectively. The maximum drop in latent heat during melting and freezing for the PCM with MWCNTs was about 10.1% and 9.3%, respectively, whereas for the PCM with CuO, they were about 11% and 10.3%, respectively. The lowest supercooling for the PCM with MWCNTs and CuO nanoparticles was 8.6 and 8.3 °C, respectively. The present work confirms that nano-enhanced PCMs can be a potential material for storing thermal energy for various applications. Full article

The Chinese mitten crab (Eriocheir sinensis) is one of the most commercially important crustacean species in China. The aim of this study was to characterize the toxic effects of butachlor (an herbicide of the acetanilide class) on juvenile E. sinensis crabs. The lethal effects and the acute toxicity of butachlor on juvenile E. sinensis specimens were assessed through a semi-static in vitro experiment. We determined the activities of superoxide dismutase (SOD) and catalase (CAT) as well as the levels of glutathione (GSH) and malondialdehyde (MDA) in the gills and the hepatopancreas of the juvenile crabs, at different time points over a 14-day short-term exposure to butachlor. Moreover, we measured the residual levels of butachlor in three different tissues (gills, hepatopancreas, and muscles) of the juvenile crabs over a longer period. Our findings revealed that butachlor is highly toxic for juvenile E. sinensis crabs. In fact, the median lethal concentration (LC₅₀) values of butachlor at 24, 48, 72, and 96 h were found to be 4.22, 1.84, 0.34, and 0.14 mg/L, respectively, while the safe concentration was 0.014 mg/L. The antioxidant defense ability of the juvenile E. sinensis crabs against butachlor was induced after exposure to the herbicide at a concentration of 0.01 mg/L. After 14 days of exposure to butachlor at 0.04 and 0.16 mg/L, both SOD and CAT were found to be significantly inhibited (p < 0.05), the GSH levels were found to be significantly decreased (p < 0.05) and the MDA levels were identified as significantly increased (p < 0.05). Moreover, after 14 days of exposure to butachlor at 0.16 mg/L, the activities of SOD and CAT as well as the content of GSH in the hepatopancreas were found to be significantly decreased (p < 0.05). Our results revealed that a high concentration of butachlor was capable of inducing oxidative stress and damage in juvenile E. sinensis crabs. The maximal residual value of butachlor was obtained in the gills, with a content of 4.56 μg/kg. Butachlor was not detected after 24 days in the aforementioned three tissues of the juvenile crabs, thereby indicating that it was effectively metabolized. Full article

In this paper, we investigate the impact of COVID-19 on different performance measures and the risk of US Real Estate Investment Trusts (REITs) with different styles. Our findings suggest a phenomenon with compelling evidence of reduced performance without any significant changes in risk profile amidst the COVID-19 pandemic. Particularly, mortgage REITs (MREITs) appear to be more adversely affected compared to equity REITs (EREITs). We further explore and analyze the performance of specialized REITs in contrast to diversified REITs in the distinctive conditions presented by COVID-19. We find that diversification creates value for the entire sample period, whereas, during the COVID-19 pandemic, property type specialization helps, although the results are weakly significant. The findings on risk suggest investors’ short-run outlook on market reaction. These results remain robust to additional tests. The implications provide insight for investors as a reference to reallocate assets in their portfolios during uncertain times. Full article

The objective of the present paper is to put a milestone on the roadmap toward a global economic system of professional sport, at least as regards its financial dimension, i.e., its model of finance, its ownership, and some new trends in global sport finance. Professional sport went through a radical change during the 1990s when switching from gate receipts to TV rights revenues as its major source of finance and from local/domestic to internationalised/globalised sources of revenue. This change was more marked in European soccer (football) before spreading throughout other professional sport disciplines. In fact, the whole distribution of sport financing was restructured as shown in this paper. Starting from this evidence of the first stage of sport finance globalisation, it appears that new transformations have been at work in sport finance more recently. In particular, soccer moved from globalisation of flows (revenues, finance) to asset globalisation in terms of club ownership. At last, this paper discusses the emergence of new trends in global sport finance such as treating professional (soccer) players as financial assets and crypto-assets penetrating the sports business. Full article

Locoregional anaesthetic techniques are invaluable for providing multimodal analgesia for painful surgical procedures. This prospective, randomised study describes a nerve stimulator-guided brachial plexus blockade (BPB) in rabbits undergoing orthopaedic surgery in comparison to systemic lidocaine. Premedication was provided with intramuscular (IM) medetomidine, fentanyl, and midazolam. Anaesthesia was induced (propofol IV) and maintained with isoflurane. Nine rabbits received a lidocaine BPB (2%; 0.3 mL kg⁻¹), and eight received a lidocaine constant rate infusion (CRI) (2 mg kg⁻¹ IV, followed by 100 µg kg⁻¹ min⁻¹). Rescue analgesia was provided with fentanyl IV. Carprofen was administered at the end of the surgery. Postoperative pain was determined using the Rabbit Grimace Scale (RGS) and a composite pain scale. Buprenorphine was administered according to the pain score for two hours after extubation. Rabbits were filmed during the first two hours to measure distance travelled and behaviours. Food intake and faeces output were compared. Every rabbit in CRI required intraoperative rescue analgesia compared to none in BPB. However, rabbits in both groups had similar pain scores, and there was no difference in the administration of postoperative analgesia. There were no significant differences in food intake or faeces production over 18 h, and no significant differences in distance travelled or behaviours examined during the first two hours. BPB seems superior for intraoperative analgesia. Postoperatively, both groups were comparable. Full article

Anemia is a well-known complication in CKD dogs, but its frequency in AKI dogs has been poorly investigated. The aim of the present study was to retrospectively evaluate frequency, degree of severity, and regeneration rate of anemia in relation to IRIS grade, etiology, therapy, and outcome. Medical records of dogs (2017–2023) with historical, laboratory, and ultrasound findings consistent with AKI were retrospectively reviewed. According to etiology, AKI was classified as ischemic/inflammatory (IS), infectious (INF), nephrotoxic (NEP), obstructive (OBS), and unknown (UK). AKI dogs were also classified according to therapeutical management (medical vs. hemodialysis), survival to discharge (survivors vs. non-survivors). Anemia was defined as HCT < 37% and classified as mild (HCT 30–37%), moderate (HCT 20–29%), severe (13–19%), or very severe (<13%). Anemia was classified as microcytic (MCV < 61 fL), normocytic (61 and 73 fL), and macrocytic (>73 fL). Anemia was considered hypochromic (MCHC< 32 g/dL), normochromic (32 and 38 g/dL), and hyperchromic (>38 g/dL). Regeneration rate was considered absent (RET ≤ 60,000/μL), mild 61,000–150,000/μL), and moderate (>150,000/μL). A total of 120 AKI dogs were included in the study, and anemia was found in 86/120 dogs (72%). The severity of anemia was mild in 32/86 dogs (37%), moderate in 40/86 dogs (47%), severe in 11/86 dogs (13%), and very severe in 3/86 (3%). Anemia was normochromic in 71/86 dogs (83%), hyperchromic in 12/86 dogs (14%), and hypochromic in 3/86 dogs (3%). Normocytic anemia was present in 56/86 dogs (65%), microcytic anemia in 27/86 dogs (31%), and macrocytic anemia in 3/86 dogs (4%). Non-regenerative anemia was found in 76/86 dogs (88%). The frequency of anemia increased significantly (p < 0.0001) with the progression of IRIS grade, although no significant difference in the severity of anemia was found among the IRIS grades. The frequency of non-regenerative forms of anemia was significantly higher than regenerative forms (p < 0.0001) in all IRIS grades. In our population of AKI dogs, anemia was a very frequent finding, in agreement with current findings in human nephrology. Full article

This study aimed at determining the identity of freshwater snails collected from selected water habitats frequented by wildlife as source of drinking water in the Matebeleland region of Zimbabwe and further screening the identified snails for natural infections with amphistomes using PCR. A total of 487 freshwater snails were collected from six areas in the Matebeleland region of Zimbabwe for identification and screening of amphistome infection. Eight freshwater snail species were morphologically identified and Biomphalaria pfeifferi, Bul. tropicus, Bul. truncatus, Bul. globosus, and L. (R.) natalensis were confirmed using the COI gene. Bulinus tropicus and Phy. acuta were the most abundant species at 33.9% (165/487) and 31.2% (155/487), respectively. DNA of amphistome was detected in 11.9% (58/487) of the collected snails. The highest infection rate was detected in Bul. globosus (44.4%). West Nicholson recorded the highest infection rate (33.9%), and infection was not detected in L. (R.) natalensis, Phy. acuta, and Bellamya spp. Amphistome DNA from M. tuberculata was successfully sequenced and identified as Calicophoron microbothrium. An additional band was detected in M. tuberculata, Bul. tropicus, and Bul. trancatus, which showed a 96.42% similarity to Paragonimus sp. sequence in the GenBank. Full article

Traditionally, tenderness has been assessed through shear force testing, which is inherently destructive, the accuracy is easily affected, and it results in considerable sample wastage. Although this technology has some drawbacks, it is still the most effective detection method currently available. In light of these drawbacks, non-destructive testing techniques have emerged as a preferred alternative, promising greater accuracy, efficiency, and convenience without compromising the integrity of the samples. This paper delves into applying five advanced non-destructive testing technologies in the realm of meat tenderness assessment. These include near-infrared spectroscopy, hyperspectral imaging, Raman spectroscopy, airflow optical fusion detection, and nuclear magnetic resonance detection. Each technology is scrutinized for its respective strengths and limitations, providing a comprehensive overview of their current utility and potential for future development. Moreover, the integration of these techniques with the latest advancements in artificial intelligence (AI) technology is explored. The fusion of AI with non-destructive testing offers a promising avenue for the development of more sophisticated, rapid, and intelligent systems for meat tenderness evaluation. This integration is anticipated to significantly enhance the efficiency and accuracy of the quality assessment in the meat industry, ensuring a higher standard of safety and nutritional value for consumers. The paper concludes with a set of technical recommendations to guide the future direction of non-destructive, AI-enhanced meat tenderness detection. Full article

Unsaturated fat replacement should be used to reduce the use of saturated fat and trans fatty acids in the diet. In this study, pea protein micro-gels (PPMs) with different structures were prepared by microparticulation at pH 4.0–7.0 and named as PPM (pH 4.0), PPM (pH 4.5), PPM (pH 5.0), PPM (pH 5.5), PPM (pH 6.0), PPM (pH 6.5), and PPM (pH 7.0). Pea protein was used as a control to evaluate the structure and interfacial properties of PPMs by particle size distribution, Fourier transform infrared spectroscopy (FTIR), free sulfhydryl group content, and emulsifying property. PPM (pH 7.0) was suitable for application in O/W emulsion stabilization because of its proper particle size, more flexible structure, high emulsifying activity index (EAI) and emulsifying stability index (ESI). The Pickering emulsion stabilized by PPM (pH 7.0) had a uniform oil droplet distribution and similar rheological properties to cream, so it can be used as a saturated fat replacement in the manufacture of ice cream. Saturated fat was partially replaced at different levels of 0%, 20%, 40%, 60%, 80%, and 100%, which were respectively named as PR0, PR20, PR40, PR60, PR80, and PR100. The rheological properties, physicochemical indexes, and sensory properties of low-saturated fat ice cream show that PPM (pH 7.0)-stabilized emulsion can be used to substitute 60% cream to manufacture low-saturated fat ice cream that has high structural stability and similar melting properties, overrun, and sensory properties to PR0. The article shows that it is feasible to prepare low-saturated fat ice cream with PPM (pH 7.0)-stabilized Pickering emulsion, which can not only maintain the fatty acid profile of the corn oil used, but also possess a solid-like structure. Its application is of positive significance for the development of nutritious and healthy foods and the reduction of chronic disease incidence. Full article

Illicium verum Hook. f. is a globally significant spice, which is recognized in China as a food-medicine homolog and extensively utilized across the pharmaceutical, food, and spice industries. China boasts the world’s leading resources of I. verum, yet its comprehensive utilization remains relatively underexplored. Through a resource survey of I. verum and the application of bibliometric visualization using CiteSpace, this study analyzed 324 papers published in the Web of Science Core Collection (WOSCC) from 1962 to 2023 and 353 core documents from China’s three major databases (CNKI, Wanfang Database, and VIP Database). I. verum from Guangxi province towards various southern provinces in China, with autumn fruits exhibited superior quality and market value over their spring fruits. Literature in WOSCC emerged earlier, with a research emphasis on food science technology and pharmacology pharmacy domains. WOSCC research on I. verum could be divided into two phases: an embryonic period (1962–2001) and a growth period (2002–2023), showing an overall upward trend in publication. The three major Chinese databases contain a larger number of publications, with a focus on the food sector, which could be categorized into three stages: an embryonic period (1990–1999), a growth period (2000–2010), and a stable period (2011–2023), with an overall downward trend in publication. Both Chinese and international research hotspots converge on the medical applications of I. verum, with antioxidant bioactivity research emerging as a prevailing trend. This study delineated the resource distribution of I. verum across China and identified the research hotspots and trends both in China and internationally. The findings are beneficial for guiding researchers in swiftly establishing their research focus and furnishing decision-makers with a comprehensive reference for industry information. Full article

α-Dicarbonyl compounds (α-DCs) are commonly present in various foods. We conducted the investigation into concentration changes of α-DCs including 3-deoxyglucosone (3-DG), glyoxal (GO), and methylglyoxal (MGO) in fresh fruits and decapped commercial juices during storage at room temperature and 4 °C, as well as in homemade juices during storage at 4 °C. The studies indicate the presence of α-DCs in all samples. The initial contents of 3-DG in the commercial juices (6.74 to 65.61 μg/mL) are higher than those in the homemade ones (1.97 to 4.65 μg/mL) as well as fruits (1.58 to 3.33 μg/g). The initial concentrations of GO and MGO are normally less than 1 μg/mL in all samples. During storage, the α-DC levels in the fruits exhibit an initial increase followed by a subsequent decrease, whereas, in all juices, they tend to accumulate continuously over time. As expected, 4 °C storage reduces the increase rates of the α-DC concentrations in most samples. From the viewpoint of the α-DC contents, fruits and homemade juices should always be the first choice for daily intake of nutrients and commercial juices ought to be mostly avoided. Full article

In Peru, the consumption of panettone has increased, highlighting the importance of its sensory aspect, quality and price for its acceptance. This study evaluated sensory, physicochemical, texture and color attributes in commercial and traditional panettones. The RATA descriptive test and the discriminative sorting task were used, with 168 and 92 consumers, respectively. In addition, acceptability and purchase intention were evaluated. Significant differences were found between the samples; the traditional panettone showed lower weight, pH and fat content. Regarding the color of the crust and crumb, differences were also observed between both types. Regarding texture, traditional panettone showed less hardness and chewiness compared to commercial ones. The sorting method allowed us to differentiate the samples, where consumers differentiated the traditional panettone from the commercial ones, although within the commercial ones, they also found differences. The RATA test showed a similar behavior, traditional panettones were described as spongy, with fruits and a strong smell, unlike the commercial ones characterized as greasy, brown and fibrous. It is concluded that sensory methods are useful to understand the quality of panettone along with the physicochemical parameters, which influence consumer preferences according to the sensory characteristics and the quality of the ingredients. Full article