Reproduction in goats is a highly complex and dynamic process of life regulation, involving coordinated regulation from various aspects such as central nervous system regulation, reproductive system development, oocyte maturation, and fertilized egg development. In recent years, researchers have identified numerous genes associated with goat reproductive performance through high-throughput sequencing, single-cell sequencing, gene knockout, and other techniques. However, there is still an urgent need to explore marker genes related to goat reproductive performance. In this study, a single-cell RNA sequencing dataset of oocytes (GSE136005) was obtained from the Gene Expression Omnibus (GEO) database. Weighted Gene Co-expression Network Analysis (WGCNA) was utilized to identify modules highly correlated with goat litter size. Through gene function enrichment analysis, it was found that genes within the modules were mainly enriched in adhesive junctions, cell cycle, and other signaling pathways. Additionally, the top 30 hub genes with the highest connectivity in WGCNA were identified. Subsequently, using Protein–Protein Interaction (PPI) network analysis, the top 30 genes with the highest connectivity within the modules were identified. The intersection of hub genes, key genes in the PPI network, and differentially expressed genes (DEGs) led to the identification of the RPL4 gene as a key marker gene associated with reproductive capacity in goat oocytes. Overall, our study reveals that the RPL4 gene in oocytes holds promise as a biological marker for assessing goat litter size, deepening our understanding of the regulatory mechanisms underlying goat reproductive performance. Full article

Glucocorticoid-induced osteoporosis (GIOP) is a side effect of glucocorticoid (GC) treatment; however, despite established prevention guidelines in various countries, a gap persists between these guidelines and clinical practice. To address this gap, we implemented a collaborative intervention between hospitals and community pharmacists, aiming to assess its effectiveness. Pharmacists recommended to the prescribing doctor osteoporosis treatment for patients who did not undergo osteoporosis treatment with a fracture risk score of ≥3 via tracing reports (TRs), between 15 December 2021, and 21 January 2022. Data were extracted from electronic medical records, including prescriptions, concomitant medications, reasons for not pursuing osteoporosis treatment, and TR contents. Of 391 evaluated patients, 45 were eligible for TRs, with 34 (75.6%) being males. Prednisolone was the most common GCs administered, and urology was the predominant treatment department. Among the 45 patients who received TRs, prescription suggestions were accepted for 19 (42.2%). After undertaking the intervention, guideline adherence significantly increased from 87% to 92.5%. This improvement indicates that TRs effectively bridged the evidence–practice gap in GIOP prevention among GC patients, suggesting their potential utility. Expansion of this initiative is warranted to further prevent GIOP. Full article

To meet the demand for higher performance and wearability, integrated circuits are developing towards having multilayered structures and greater flexibility. However, traditional circuit fabrication methods using etching and lamination processes are not compatible with flexible substrates. As a non-contact printing method in additive manufacturing, electrohydrodynamic printing possesses advantages such as environmental friendliness, sub-micron manufacturing, and the capability for flexible substrates. However, the interconnection and insulation of different conductive layers become significant challenges. This study took composite silver ink as a conductive material to fabricate a circuit via electrohydrodynamic printing, applied polyimide spraying to achieve interlayer insulation, and drilled micro through-holes to achieve interlayer interconnection. A 200 × 200 mm² ten-layer flexible circuit was thus prepared. Furthermore, we combined a finite element simulation with reliability experiments, and the prepared ten-layer circuit was found to have excellent bending resistance and thermal cycling stability. This study provides a new method for the manufacturing of low-cost, large-sized, multilayer flexible circuits, which can improve circuit performance and boost the development of printed electronics. Full article

A commercial activated carbon (AC) was modified through iron oxide incorporation to obtain microwave absorbers (MWAs) for microwave-assisted pyrolysis. The influence of iron oxide content (5 and 20 wt% Fe₃O₄) and the modification methods were tested as follows: (1) in situ co-precipitation + washing step with Milli-Q; (2) in situ co-precipitation + washing step with Milli-Q/ethanol; and (3) physical iron oxide blending. The resulting MWAs were evaluated on the microwave-assisted pyrolysis of hardwood in a Milestone Flexiwave microwave reactor. The biochar yield varied from 24 wt% to 89 wt% and was influenced by the modification method rather than the iron oxide addition. The MWAs with physically blended iron oxide resulted in biochar yields comparable to conventional biochar (450 °C). Furthermore, the addition of iron oxide-activated carbon composites during the microwave-assisted pyrolysis caused a significant decrease in the biochar’s 16 EPA polycyclic aromatic hydrocarbons, mainly by reducing the amount of pyrene in the biochar. Full article

Dense-phase-tower desulfurization technology is an emerging semi-dry flue-gas desulfurization ash process, i.e., the flue gas is allowed to enter the desulfurization tower from the bottom up and, at the same time, is sprayed with a desulfurizing agent that undergoes an acid–base reaction with the flue gas in the ascent process. The calcium sulfite and calcium sulfate produced by the reaction and the part of the desulfurization agent that is not involved in the reaction will enter the subsequent dust removal system, and what is retained is the by-product desulfurization ash. This desulfurization ash contains a large amount of calcium sulfite, which leads to its unstable nature; it is easily oxidized and expands in volume, and, if used in the field of building materials, it will lead to cracking and other problems, so it is difficult to effectively use it. In order to solve this problem, XRF, XRD, and iodometric and other analytical methods were used to determine the specific composition of desulfurization ash, and the muffle furnace and vertical tube furnace were used to study the thermal oxidative modification of calcium sulfite in desulfurization ash, to investigate the effects of the oxygen content, reaction temperature, medium flow rate, and chloride content on the oxidation of calcium sulfite, and to analyze the thermodynamics in the high-temperature oxidation reaction. The results showed that the oxidation rate of calcium sulfite increased with higher reaction temperatures. Increased oxygen content promoted the oxidation rate, particularly at low oxygen levels. The oxidation rate of calcium sulfite correlated positively with the medium flow rate until a rate of 75 mL·min⁻ was reached. At a reaction temperature of 420 °C and a gas flow rate of 85 mL·min⁻¹, the oxidation conversion efficiency exceeded 89%. Chloride content significantly reduced the oxidation rate of calcium sulfite, although this inhibition weakened at temperatures above 500 °C. Kinetic analysis suggested that the oxidation reaction of calcium sulfite predominantly occurred below 500 °C. These findings have both theoretical and practical implications for the thermal oxidation treatment and disposal of desulfurization ash. Full article

Mathematical algorithms relate satellite data of ocean color with the surface Chlorophyll-a concentration (Chl-a), a proxy of phytoplankton biomass. These mathematical tools work best when they are adapted to the unique bio-optical properties of a particular oceanic province. Ocean color algorithms should also consider that there are significant differences between datasets derived from different sensors. Common solutions are to provide different parameters for each sensor or use merged satellite data. In this paper, we use satellite data from the Copernicus merged product suite and in situ data from the southernmost part of the California Current System to test two widely used global algorithms, OCx and CI, and a regional algorithm, CalCOFI2. The OCx algorithm yielded the most favorable results. Consequently, we regionalized it and conducted further testing, leading to significant improvements, especially in eutrophic and oligotrophic waters. The database was then separated according to (a) dynamic boundaries in the area, (b) bio-optical properties, and (c) climatic conditions (El Niño/La Niña). Regional algorithms were obtained and tested for each partition. The Chl-a retrievals for each model were tested and compared. The best fit for the data was for the regional algorithms that considered the climatic conditions (El Niño/La Niña). These results will allow for the construction of consistent regionally adapted time series and, therefore, will demonstrate the importance of El Niño/La Niña events on the bio-optical properties of the area. Full article

Space-based gravitational wave detection is extremely sensitive to disturbances. The Keplerian configuration cannot accurately reflect the variations in spacecraft configuration. Planetary gravitational disturbances are one of the main sources. Numerical simulation is an effective method to investigate the impact of perturbation on spacecraft orbits. This study shows that, in the context of the Taiji project, Earth’s gravity is an essential factor in the change in heliocentric formation configuration, contributing to the relative acceleration between spacecrafts in the order of $\mathcal{O}\left({10}^{-6}\right)\mathrm{m}$·${\mathrm{s}}^{-2}$. Considering 00:00:00 on 27 October 2032 as the initial orbiting moment, under the influence of Earth’s gravitational perturbation, the maximum relative change in armlengths and variation rates of armlengths for Taiji is $1.6\times {10}^5\mathrm{km}$, $32\mathrm{m}$·${\mathrm{s}}^{-1}$, respectively, compared with the unperturbed Keplerian orbit. Additionally, by considering the gravitational perturbations of Venus and Jupiter, the armlength and relative velocity for Taiji are reduced by $16.01\%$ and $17.45\%$, respectively, compared with when only considering that of Earth. The maximum amplitude of the formation motion indicator changes with the orbit entry time. Results show that the relative velocity increase between the spacecrafts is minimal when the initial orbital moment occurs in July. Moreover, the numerical simulation results are inconsistent when using different ephemerides. The differences between ephemerides DE440 and DE430 are smaller than those between DE440 and DE421. Full article

Background and Objectives: Secondary hyperparathyroidism (SHPT) poses a common condition among patients with chronic kidney disease (CKD) due to the chronic stimulation of the parathyroid glands as a result of persistently low calcium levels. As a first option for medical treatment, vitamin D receptor analogs (VDRAs) and calcimimetic agents are generally used. Apart from cinacalcet, which is orally taken, in recent years, another calcimimetic agent, etelcalcetide, is being administered intravenously during dialysis. Materials and Methods: In a 5-year retrospective study between 2018 and 2023, 52 patients undergoing dialysis were studied. The aim of this study is to highlight the possible effects and/or benefits that intravenously administered calcimimetic agents have on CKD patients. A total of 34 patients (65.4%) received cinacalcet and etelcalcetide while parathormone (PTH) and calcium serum levels were monitored on a monthly basis. Results: A total of 29 out of 33 patients (87.9%) that received treatment with etelcalcetide showed a significant decrease in PTH levels, which rose up to 57% compared to the initial values. None of the included patients needed to undergo parathyroidectomy (PTx) due to either extremely high and persistent PTH levels or severe side effects of the medications. It is generally strongly advised that parathyroidectomies should be performed by an expert surgical team. In recent years, a significant decrease in parathyroidectomies has been recorded globally, a fact that is mainly linked to the constantly wider use of new calcimimetic agents. This decrease in parathyroidectomies has resulted in an important decrease in complications occurring in cervical surgeries (e.g., perioperative hemorrhage and nerve damage). Conslusions: Despite the fact that these surgical complications cannot be easily compared to the pharmaceutical side effects, the recorded decrease in parathyroidectomies is considered to be notable, especially in cases of relapse where a difficult reoperation would be considered based on previously published guidelines. Full article

Background: Sjögren’s disease (SjD) is a common systemic autoimmune disease that affects mainly women. Key pathologic features include the infiltration of exocrine glands by lymphocytes and the activation of B lymphocytes with the production of autoantibodies. We aimed to analyze the transcriptome of circulating B cells from patients with SJD and healthy controls to decipher the B-cell-specific contribution to SJD. Methods: RNA from peripheral blood B cells of five untreated female patients with SjD and positive ANA, positive anti-SSA (both Ro-52 and Ro-60), positive anti-SSB and positive rheumatoid-factor, and five healthy controls was subjected to whole-transcriptome sequencing. A false discovery rate of < 0.1 was applied to define differentially expressed genes (DEG). Results: RNA-sequencing identified 56 up and 23 down DEG. Hierarchal clustering showed a clear separation between the two groups. Ingenuity pathway analysis revealed that these genes may play a role in interferon signaling, chronic mycobacterial infection, and transformation to myeloproliferative disorders. Conclusions: We found upregulated expression of type-I and type-II interferon (IFN)-induced genes, as well as genes that may contribute to other concomitant conditions, including infections and a higher risk of myeloproliferative disorders. This adds insight into the autoimmune process and suggests potential targets for future functional and prognostic studies. Full article

Due to the globally increasing life expectancies, many countries are raising their official retirement age to prevent labor shortages and sustain retirement systems. This trend emphasizes the need for sustainable employability. Unhealthy lifestyles pose a risk to sustainable employability as they contribute to chronic diseases and decreased productivity. Workplace Health Promotion (WHP) programs have gained attention as a strategy to enhance employee health and well-being. The Netherlands Armed Forces, a unique employer with demanding psychological and physical requirements, was used as a case study to investigate the associations of a WHP Program with workers health and sustainable employability. The program offered tailor-made guidance to participants (N = 341) through individual coaching trajectories. The program’s impact was evaluated by measuring self-reported health, mental well-being, and sustainable employability over a 6-month period. Results indicated significant improvements across all these dimensions after participation in the program. This study provides valuable insights into the benefits of tailor-made WHP programs. While this was an observational study without a control group, this study supports the importance of incorporating individualized approaches in WHP initiatives to foster positive outcomes in health and sustainable employability. Full article

Microfluidic technology provides a solution to the challenge of continuous CaCO₃ particle synthesis. In this study, we utilized a 3D-printed microfluidic chip to synthesize CaCO₃ micro- and nanoparticles in vaterite form. Our primary focus was on investigating a continuous one-phase synthesis method tailored for the crystallization of these particles. By employing a combination of confocal and scanning electron microscopy, along with Raman spectroscopy, we were able to thoroughly evaluate the synthesis efficiency. This evaluation included aspects such as particle size distribution, morphology, and polymorph composition. The results unveiled the existence of two distinct synthesis regimes within the 3D-printed microfluidic chips, which featured a channel cross-section of 2 mm². In the first regime, which was characterized by chaotic advection, particles with an average diameter of around 2 $\mathsf{\mu }$m were produced, thereby displaying a broad size distribution. Conversely, the second regime, marked by diffusion mixing, led to the synthesis of submicron particles (approximately 800–900 nm in diameter) and even nanosized particles (70–80 nm). This research significantly contributes valuable insights to both the understanding and optimization of microfluidic synthesis processes, particularly in achieving the controlled production of submicron and nanoscale particles. Full article

This study investigates the utilisation of organometallic network frameworks composed of fourth-period transition metals and tetrahydroxyquinone (THQ) in electrocatalytic CO₂ reduction. Density functional theory (DFT) calculations were employed in analysing binding energies, as well as the stabilities of metal atoms within the THQ frameworks, for transition metal TM-THQs ranging from Y to Cd. The findings demonstrate how metal atoms could be effectively dispersed and held within the THQ frameworks due to sufficiently high binding energies. Most TM-THQ frameworks exhibited favourable selectivity towards CO₂ reduction, except for Tc and Ru, which experienced competition from hydrogen evolution reaction (HER) and required solution environments with pH values greater than 5.716 and 8.819, respectively, to exhibit CO₂RR selectivity. Notably, the primary product of Y, Ag, and Cd was HCOOH; Mo produced HCHO; Pd yielded CO; and Zr, Nb, Tc, Ru, and Rh predominantly generated CH₄. Among the studied frameworks, Zr-THQ displayed values of 1.212 V and 1.043 V, corresponding to the highest limiting potential and overpotential, respectively, while other metal–organic frameworks displayed relatively low ranges of overpotentials from 0.179 V to 0.949 V. Consequently, it is predicted that the TM-THQ framework constructed using a fourth-period transition metal and tetrahydroxyquinone exhibits robust electrocatalytic reduction of CO₂ catalytic activity. Full article

Background and Objectives: This study aimed to evaluate the mid-term effectiveness and safety of a combined ultrasound (US) and fluoroscopy (FL)-guided approach in comparison to US-guided and FL-guided caudal epidural steroid injections (CESI) for treating unilateral lower lumbar radicular pain. Materials and Methods: A total of 154 patients who underwent CESI between 2018 and 2022 were included. Patients were categorized into three groups based on the guidance method: combined US and FL (n = 51), US-guided (n = 51), and FL-guided (n = 52). The study design was retrospective case-controlled, utilizing patient charts and standardized forms to assess clinical outcomes, adverse events, complications during the procedures. Results: In all groups, Oswestry Disability Index and Verbal Numeric Scale scores improved at 1, 3, and 6 months after the last injection, with no significant differences between groups (p < 0.05). The treatment success rate at all time points was also similar among the groups. Logistic regression analysis showed that injection method, cause, sex, age, number of injections, and pain duration did not independently predict treatment success. Blood was aspirated before injection in 2% (n = 1), 13.5% (n = 7), and 4% (n = 2) of patients in the combined US and FL groups, FL-guided groups, and US-guided groups, respectively. Intravascular contrast spread was detected in one patient in the combined method groups and seven in the FL-guided groups. Conclusions: When comparing pain reduction and functional improvement, there was no significant difference between the three methods. The combined method took less time compared to using FL alone. The combined approach also showed a lower occurrence of intravascular injection compared to using FL alone. Moreover, blood vessels at the injection site can be identified with an ultrasound using the combined method. Given these advantages, it might be advisable to prioritize the combined US- and FL-guided therapy when administering CESI for patients with unilateral lumbar radicular pain. Full article

The universal newborn hearing screening (NHS) program was implemented in Russia in 2008 to replace the high-risk newborn hearing screening. More than 95% coverage and significant improvement in early detection and intervention is achieved. Meanwhile, it was shown that current OAE-based hearing screening missed 13% of newborns with genetically ascertained hereditary sensorineural hearing loss (SNHL). The aim of the study is to assess the results of genetic investigation and NHS in a large cohort of Russian children with bilateral SNHL and to study the feasibility of implementation of combined hearing and genetic screening in Russia. Genetic, audiological and NHS data of 1292 pediatric patients with bilateral SNHL born in 2008–2021 were analyzed. GJB2 sequencing was performed for all subjects, 644 patients had pathological GJB2 genotype, 406 of them were homozygous for c.35delG variant. The group of 155 GJB2-negative patients were searched for other SNHL genes, The pathological genotypes were identified at 87 patients. The most frequent genes were STRC (21.8%), USH2A (16.1%), OTOF (8%) and SLC26A4 (6.9%). Children with confirmed genetic etiology passed NHS in 21% of cases. The perspectives of implementation of national comprehensive newborn hearing and genetic screening including whole exome sequencing technologies are discussed. Full article

This study explores trust dynamics within online social networks, blending social science theories with advanced machine-learning (ML) techniques. We examine trust’s multifaceted nature—definitions, types, and mechanisms for its establishment and maintenance—and analyze social network structures through graph theory. Employing a diverse array of ML models (e.g., KNN, SVM, Naive Bayes, Gradient Boosting, and Neural Networks), we predict connection strengths on Facebook, focusing on model performance metrics such as accuracy, precision, recall, and F1-score. Our methodology, executed in Python using the Anaconda distribution, unveils insights into trust formation and sustainability on social media, highlighting the potent application of ML in understanding these dynamics. Challenges, including the complexity of modeling social behaviors and ethical data use concerns, are discussed, emphasizing the need for continued innovation. Our findings contribute to the discourse on trust in social networks and suggest future research directions, including the application of our methodologies to other platforms and the study of online trust over time. This work not only advances the academic understanding of digital social interactions but also offers practical implications for developers, policymakers, and online communities. Full article

Malaria is a parasitic infection that may result in an acute, life-threatening illness. It is a major public health problem in the tropical world. The disease is caused by the parasites of the genus Plasmodium and is transmitted by female Anopheles mosquitoes. Saudi Arabia is in the elimination phase of malaria control. Several parts of Saudi Arabia report cases of imported malaria among travelers and visitors. The city of Makkah in Saudi Arabia has a population of about 2.3 million. Moreover, over 6 million religious visitors from different parts of the world visit Makkah annually. During the COVID-19 outbreak, travel restrictions were enforced in Makkah to contain the spread of COVID-19. We compare the total reported cases of malaria in Makkah before, during, and after COVID-19 travel restrictions in this retrospective cross-sectional study. Data on demographics, clinical data, and laboratory parameters were collected from the medical records of the Ministry of Health, Saudi Arabia. The annual malaria incidence rates in Makkah were 29.13/million people (2018), 37.82/million people (2019), 15.65/million people (2020), 12.61/million people (2021), and 48.69/million people (2022). Most of the malaria cases in Makkah were caused by Plasmodium falciparum, followed by P. vivax. Sudan, Nigeria, Yamen, Pakistan, and India are the top five countries contributing to malaria cases in Makkah. Weekly malaria case analyses revealed that COVID-19-related travel restrictions resulted in zero malaria cases in Makkah, indicating the magnitude of the travel-related malaria burden in the city. Full article

In order to reduce the toxicological impact on healthy cells and to improve the therapeutic response, many drug delivery systems have been fabricated and analysed, involving the use of different natural and synthetic materials at macro-, micro- and nanoscales. Among the natural materials which have demonstrated a huge potential for the development of effective drug delivery systems, silk fibroin has emerged for its excellent biological properties and for the possibility to be processed in a wide range of forms, which can be compliant with multiple active molecules and pharmaceutical ingredients for the treatment of various diseases. This review aims at presenting silk fibroin as an interesting biopolymer for applications in drug delivery systems, exploring the results obtained in recent works in terms of technological progress and effectiveness in vitro and in vivo. Full article

Unidirectional porous hydroxyapatite (UDPHAp) was developed as a remarkable scaffold characterized by a distinct structure with unidirectional pores oriented in the horizontal direction and connected through interposes. We evaluated the radiographic changes, clinical outcomes, and complications following UDPHAp implantation for the treatment of bone tumors. Excellent bone formation within and around the implant was observed in all patients treated with intralesional resection and UDPHAp implantation for benign bone tumors. The absorption of UDPHAp and remodeling of the bone marrow space was observed in 45% of the patients at a mean of 17 months postoperatively and was significantly more common in younger patients. Preoperative cortical thinning was completely regenerated in 84% of patients at a mean of 10 months postoperatively. No complications related to the implanted UDPHAp were observed. In a pediatric patient with bone sarcoma, when the defect after fibular resection was filled with UDPHAp implants, radiography showed complete resorption of the implant and clear formation of cortex and marrow in the resected part of the fibula. The patient could walk well without crutches and participate in sports activities. UDPHAp is a useful bone graft substitute for the treatment of benign bone tumors, and the use of this material has a low complication rate. We also review and discuss the potential of UDPHAp as a bone graft substitute in the clinical setting of orthopedic surgery. Full article

The development of fully biobased hydrogels obtained by simple routes and in the absence of toxic or environmentally harmful reagents is a major challenge in meeting new societal demands. In this work, we discuss the development of hydrogels made from cellulose nanocrystals (CNCs) and xyloglucan (XG), two non-toxic, renewable, and biobased components. We present three strategies to fine-tune the functional properties. The first one consists in varying the XG/CNC ratio that leads to the modulation of the mechanical properties of hydrogels as well as a better comprehension of the gel mechanism formation. The second relies on tuning the XG chains’ interaction by enzymatic modification to achieve thermoresponsive systems. Finally, the third one is based on the increase in the hydrogel solid content by osmotic concentration. The high-solid-content gels were found to have very high mechanical properties and self-healing properties that can be used for molding materials. Overall, these approaches are a case study of potential modifications and properties offered by biobased nanocolloidal hydrogels. Full article

Intervertebral disc degeneration (IVDD) is a worldwide disease that causes low back pain and reduces quality of life. Biotherapeutic strategies based on tissue engineering alternatives, such as intervertebral disc scaffolds, supplemented by drug-targeted therapy have brought new hope for IVDD. In this study, to explore the role and mechanism of MnO₂/GelMA composite hydrogels in alleviating IVDD, we prepared composite hydrogels with MnO₂ and methacrylate gelatin (GelMA) and characterized them using compression testing and transmission electron microscopy (TEM). Annulus fibrosus cells (AFCs) were cultured in the composite hydrogels to verify biocompatibility by live/dead and cytoskeleton staining. Cell viability assays and a reactive oxygen species (ROS) probe were used to analyze the protective effect of the composite hydrogels under oxidative damage. To explore the mechanism of improving the microenvironment, we detected the expression levels of antioxidant and autophagy-related genes and proteins by qPCR and Western blotting. We found that the MnO₂/GelMA composite hydrogels exhibited excellent biocompatibility and a porous structure, which promoted cell proliferation. The addition of MnO₂ nanoparticles to GelMA cleared ROS in AFCs and induced the expression of antioxidant and cellular autophagy through the common SIRT1/NRF2 pathway. Therefore, the MnO₂/GelMA composite hydrogels, which can improve the disc microenvironment through scavenging intracellular ROS and resisting oxidative damage, have great application prospects in the treatment of IVDD. Full article

The United Arab Emirates has very little data on the incidence or prevalence of fungal diseases. Using total and underlying disease risk populations and likely affected proportions, we have modelled the burden of fungal disease for the first time. The most prevalent serious fungal conditions are recurrent vulvovaginitis (~190,000 affected) and fungal asthma (~34,000 affected). Given the UAE’s low prevalence of HIV, we estimate an at-risk population of 204 with respect to serious fungal infections with cryptococcal meningitis estimated at 2 cases annually, 15 cases of Pneumocystis pneumonia (PCP) annually, and 20 cases of esophageal candidiasis in the HIV population. PCP incidence in non-HIV patients is estimated at 150 cases annually. Likewise, with the same low prevalence of tuberculosis in the country, we estimate a total chronic pulmonary aspergillosis prevalence of 1002 cases. The estimated annual incidence of invasive aspergillosis is 505 patients, based on local data on rates of malignancy, solid organ transplantation, and chronic obstructive pulmonary disease (5.9 per 100,000). Based on the 2022 annual report of the UAE’s national surveillance database, candidaemia annual incidence is 1090 (11.8/100,000), of which 49.2% occurs in intensive care. Fungal diseases affect ~228,695 (2.46%) of the population in the UAE. Full article

Talaromyces sp. DC2 is an endophytic fungus that was isolated from the stem of Catharanthus roseus (L.) G. Don in Hanoi, Vietnam and is capable of producing vinca alkaloids. This study utilizes the PacBio Sequel technology to completely sequence the whole genome of Talaromyces sp. DC2The genome study revealed that DC2 contains a total of 34.58 Mb spanned by 156 contigs, with a GC content of 46.5%. The identification and prediction of functional protein-coding genes, tRNA, and rRNA were comprehensively predicted and highly annotated using various BLAST databases, including non-redundant (Nr) protein sequence, Gene Ontology (GO), Kyoto Encyclopedia of Genes and Genomes (KEGG), Clusters of Orthologous Groups (COG), and Carbohydrate-Active Enzymes (CAZy) databases. The genome of DC2 has a total of 149, 227, 65, 153, 53, and 6 genes responsible for cellulose, hemicellulose, lignin, pectin, chitin, starch, and inulin degradation, respectively. The Antibiotics and Secondary Metabolites Analysis Shell (AntiSMASH) analyses revealed that strain DC2 possesses 20 biosynthetic gene clusters responsible for producing secondary metabolites. The strain DC2 has also been found to harbor the DDC gene encoding aromatic L-amino acid decarboxylase enzyme. Conclusively, this study has provided a comprehensive understanding of the processes involved in secondary metabolites and the ability of the Talaromyces sp. DC2 strain to degrade plant cell walls. Full article