Clays are a class of porous materials; their surfaces are naturally covered by moisture. Weak thermal treatment may be considered practical to remove the water molecules, changing the surface properties and making the micro- and/or mesoporosities accessible to interact with other molecules. Herein, a modulated thermogravimetric analysis (MTGA) study of the moisture behavior on the structures of five, both fibrous and laminar, clay minerals is reported. The effect of the thermal treatment at 150 °C, which provokes the release of weakly adsorbed water molecules, was also investigated. The activation energies for the removal of the adsorbed water (Ea) were calculated, and they were found to be higher, namely, from 160 to 190 kJ mol⁻¹, for fibrous clay minerals compared to lamellar structures, ranging in this latter case from 80 to 100 kJ mol⁻¹. The thermal treatment enhances the rehydration in Na-montmorillonite, stevensite, and sepiolite structures with a decrease in the energy required to remove it, while Ea increases significantly in palygorskite (from 164 to 273 kJ mol⁻¹). As a proof of concept, the MTGA results are statistically correlated, together with a full characterization of the physico-chemical properties of the five clay minerals, with the adsorption of two molecules, i.e., aflatoxin B1 (AFB1) and β-carotene. Herein, the amount of adsorbed molecules ranges from 12 to 97% for the former and from 22 to 35% for the latter, depending on the particular clay. The Ea was correlated with AFB1 adsorption with a Spearman score of −0.9. When the adsorbed water is forcibly removed, e.g., under vacuum conditions and high temperatures, the structure becomes the most important, decreasing the Spearman score between β-carotene and Ea to −0.6. Full article

The purpose of this study was to examine the biocompatibility of 3D printed materials used for additive manufacturing of rigid and flexible oral devices. Oral splints were produced and finished from six printable resins (pairs of rigid/flexible materials: KeySplint Hard [KR], KeySplint Soft [KF], V-Print Splint [VR], V-Print Splint Comfort [VF], NextDent Ortho Rigid [NR], NextDent Ortho Flex [NF]), and two types of PMMA blocks for subtractive manufacturing (Tizian Blank PMMA [TR], Tizian Flex Splint Comfort [TF]) as controls. The specimens were eluted in a cell culture medium for 7d. Human gingival fibroblasts (hGF-1) and human oral mucosal keratinocytes (hOK) were exposed to the eluates for 24 h. Cell viability, glutathione levels, apoptosis, necrosis, the cellular inflammatory response (IL-6 and PGE₂ secretion), and cell morphology were assessed. All eluates led to a slight reduction of hGF-1 viability and intracellular glutathione levels. The strongest cytotoxic response of hGF-1 was observed with KF, NF, and NR eluates (p < 0.05 compared to unexposed cells). Viability, caspase-3/7 activity, necrosis levels, and IL-6/PGE₂ secretion of hOK were barely affected by the materials. All materials showed an overall acceptable biocompatibility. hOK appeared to be more resilient to noxious agents than hGF-1 in vitro. There is insufficient evidence to generalize that flexible materials are more cytotoxic than rigid materials. From a biological point of view, 3D printing seems to be a viable alternative to milling for producing oral devices. Full article

Solid oxide fuel cells (SOFCs) are a green energy technology that offers a cleaner and more efficient alternative to fossil fuels. The efficiency and utility of SOFCs can be enhanced by fabricating miniaturized component structures within the fuel cell footprint. In this research work, the parallel-connected inter-digitized design of micro-single-chamber SOFCs (µ-SC-SOFCs) was fabricated by a direct-write microfabrication technique. To understand and optimize the direct-write process, the cathode electrode slurry was investigated. Initially, the effects of dispersant Triton X-100 on LSCF (La0.6Sr0.2Fe0.8Co0.2O3-δ) slurry rheology was investigated. The effect of binder decomposition on the cathode electrode lines was evaluated, and further, the optimum sintering profile was determined. Results illustrate that the optimum concentration of Triton X-100 for different slurries was around 0.2–0.4% of the LSCF solid loading. A total of 60% of solid loading slurries had high viscosities and attained stability after 300 s. In addition, 40–50% solid loading slurries had relatively lower viscosity and attainted stability after 200 s. Solid loading and binder affected not only the slurry’s viscosity but also its rheology behavior. Based on the findings of this research, a slurry with 50% solid loading, 12% binder, and 0.2% dispersant was determined to be the optimal value for the fabricating of SOFCs using the direct-write method. This research work establishes guidelines for fabricating the micro-single-chamber solid oxide fuel cells by optimizing the direct-write slurry deposition process with high accuracy. Full article

Labdanum resin or “gum” can be obtained from Cistus ladanifer L. by two different extraction methods: the Zamorean and the Andalusian processes. Although its main use is in the fragrance and perfumery sectors, ethnobotanical reports describe its use for medicinal purposes in managing hyperglycemia and mental illnesses. However, data concerning the bioactivities and pharmacological applications are scarce. In this work, it was found that the yield of labdanum resin extracted by the Andalusian process was 25-fold higher than the Zamorean one. Both resins were purified as absolutes, and the Andalusian absolute was purified into diterpenoid and flavonoid fractions. GC-EI-MS analysis confirmed the presence of phenylpropanoids, labdane-type diterpenoids, and methylated flavonoids, which are already described in the literature, but revealed other compounds, and showed that the different extracts presented distinct chemical profile. The potential antidiabetic activity, by inhibition of α-amylase and α-glucosidase, and the potential neuroprotective activity, by inhibition of acetylcholinesterase, were investigated. Diterpenoid fraction produced the higher α-amylase inhibitory effect (~30% and ~40% at 0.5 and 1 mg/mL, respectively). Zamorean absolute showed the highest α-glucosidase inhibitory effect (~14% and ~24%, at 0.5 and 1 mg/mL, respectively). Andalusian absolute showed the highest acetylcholinesterase inhibitory effect (~70% and ~75%, at 0.5 and 1 mg/mL, respectively). Using Caco-2 and HepG2 cell lines, Andalusian absolute and its purified fractions showed moderate cytotoxic/anti-proliferative activity at 24 h exposure (IC₅₀ = 45–70 µg/mL, for Caco-2; IC₅₀ = 60–80 µg/mL, for HepG2), whereas Zamorean absolute did not produce cytotoxicity (IC₅₀ ≥ 200.00 µg/mL). Here we show, for the first time, that labdanum resin obtained by the Andalusian process, and its fractions, are composed of phytochemicals with anti-diabetic, neuroprotective and anti-proliferative potential, which are worth investigating for the pharmaceutical industry. However, toxic side-effects must also be addressed when using these products by ingestion, as done traditionally. Full article

Antioxidant properties, betalain profiles and biochemical composition were studied in table beets with maroon and yellow root colors. Features of dynamic changes during the growing season were described. Significant differences in antioxidant activity were found in table beet accessions with differently colored roots. Negative dynamics of antioxidant activity were observed in all accessions. Statistically significant differences were registered among the accessions in the total amounts of phenolic compounds, chlorophylls, and betalains. The group of maroon accessions demonstrated strong positive correlations between their antioxidant activity and total phenolics (r = 0.91), antioxidant activity and betacyanins (r = 0.80), and between betacyanins and phenolics (r = 0.90). The antioxidant activity in the accessions with yellow roots was associated with chlorophyll b (r = 0.85), ascorbic acid (r = 0.83), and total phenolics (r = 0.83). The data are presented on the structure of betalains in two table beet groups contrasting in their root color. The results of the study made it possible to identify key components in the biochemical profile of differently colored beetroots, associated with their high antioxidant activity. Dynamic changes were shown for the antioxidant activity and fractional composition of betalains in table beet during its growing season, and a conclusion was made concerning the higher nutritional value of maroon cultivars. Full article

Rootstocks serve as a strategic tool for grapevine adaptation to specific biotic and abiotic conditions and for managing vine growth, grape yield, and berry composition in commercial vineyards. This study investigates the influences of four different rootstock varieties (101-14 MGt, 3309 C, 110 R, and 140 Ru) on the viticultural performance of ‘Xinomavro’ vines, a prominent Greek red winegrape varietal. By conducting a two-year field experiment using various rootstocks, we assessed parameters related to water status, vegetative growth, yield, and berry composition. Our results revealed that rootstock selection has a significant impact on vine development, especially in terms of berry size and the concentrations of secondary metabolites. Principal component analysis confirmed the complex interaction between rootstock vigor and vine productivity. This study underscores the importance of rootstock variety in manipulating grapevine characteristics, particularly for the ‘Xinomavro’ variety, in response to regional climatic conditions. Full article

Maize yields perform differently in different environments, so the selection of suitable genotypes in diverse environments is essential for variety selection to enable better site-specific planting. Hence, the objective of the study was to estimate the productivity of 11 maize hybrids (G) in 10 different environments (E) and select high-yield and stable varieties for adaptive cultivation in 2022 and 2023. The combined analysis of variance showed that G (4%), E (50%), and their interaction (31%) had a significant effect (p < 0.01) on maize yield, with E factors contributing the most. In addition, the average yield ranged from 9398 kg/ha to 10,574 kg/ha, and ZF-2208 and DY-519 performed relatively well in both years. The AMMI model showed that the varieties DY-213, DY-605, and DY-519 had high and stable production in 2022, whereas it was ZF-2209 and LX-24 in 2023. The “W-W-W” biplot showed that DY-519 and JG-18 were the optimal varieties in 2022, and ZF-2208 and ZF-2210 were optimal in 2023. The “mean vs. stability” biplot indicated that JG-18, DY-605, and DY-213 (in 2022) and ZF-2208, LX-24, and ZF-2209 (in 2023) were the optimal varieties. Additionally, both the discrimination and representative biplot and the ranking biplot reflected that BinChuan and ShiDian (in 2022) and GengMa and YongSheng (in 2023) were the ideal test environments. In conclusion, DY-519, DY-605, ZF-2208, and LX-24 hybrids could be used for variety promotion. Moreover, BinChuan, ShiDian, GengMa, and YongSheng were the ideal test environments for selecting varieties. Therefore, the AMMI model and GGE biplot can be used to complement each other for a comprehensive evaluation of maize yield. In this way, excellent maize hybrids with high yield and stability can be selected, which could promote the selection and popularization of varieties and shorten the breeding process. Full article

Background: Axial spondyloarthropathy(AS) is a chronic inflammatory disease primarily affecting the axial skeleton, often characterized by sacroiliitis. While pulmonary embolism (PE), a potentially lethal condition, has been linked to several autoimmune diseases, limited data exist regarding PE risk among patients with AS. Methods: This retrospective cohort study utilized the Clalit Healthcare Services (CHS) database, including 5825 patients with AS and 28,356 matched controls. Follow-up began at the date of first AS diagnosis for patients and at the matched patient’s diagnosis date for controls and continued until PE diagnosis, death, or study end date. Results: Prevalence of PE before AS diagnosis in patients compared to controls was 0.4% vs. 0.2% (p < 0.01). The incidence rate of PE was 11.6 per 10,000 person-years for patients with AS and 6.8 per 10,000 person-years for controls. The adjusted hazard ratio (HR) for PE in patients with AS was 1.70 (p < 0.001). Subgroup analysis demonstrated excess risk for PE in patients with AS regardless of gender and age, with variations among AS treatment categories. Discussion: Our findings highlight a significant association between AS and PE, indicating an increased risk in patients with AS independent of age and sex and suggests a subclinical level of inflammation. Preliminary results suggest a protective role of immunosuppressing drugs. Further research into the impact of treatment strategies should be conducted and could inform clinical management and reduce the life-threatening risk of PE in Patients with AS. Full article

Rainfall nowcasting is the basis of extreme rainfall monitoring, flood prevention, and water resource scheduling. Based on the structural features of the U-Net model, we proposed the Double Recurrent Residual Attention Gates U-Net (DR2A-UNet) deep-learning model to carry out radar echo extrapolation. The model was trained with mean square error (MSE) and balanced mean square error (BMSE) as loss functions, respectively. The dynamic Z-R relationship was applied for quantitative rainfall estimation. The reference U-Net model, U-Net++, and the ConvLSTM were used as control experiments to carry out radar echo extrapolation. The results showed that the model trained by BMSE had better extrapolation. For 1 h lead time, the rainfall nowcasted by each model could reflect the actual rainfall process. DR2A-UNet performed significantly better than other models for intense rainfall, with a higher extrapolation accuracy for echo intensity and variability processes. At the 2 h lead time, the nowcast accuracy of each model was significantly reduced, but the echo extrapolation and rainfall nowcasting of DR2A-UNet were better. Full article

Pandemics can result in large morbidity and mortality rates that can cause significant adverse effects on the social and economic situations of communities. Monitoring and predicting the spread of pandemics helps the concerned authorities manage the required resources, formulate preventive measures, and control the spread effectively. In the specific case of COVID-19, the UAE (United Arab Emirates) has undertaken many initiatives, such as surveillance and contact tracing by introducing mobile apps such as Al Hosn, containment of spread by limiting the gathering of people, online schooling and remote work, sanitation drives, and closure of public places. The aim of this paper is to predict the trends occurring in pandemic outbreak, with COVID-19 in the UAE being a specific case study to investigate. In this paper, a predictive modeling approach is proposed to predict the future number of cases based on the recorded history, taking into consideration the enforced policies and provided vaccinations. Machine learning models such as LASSO Regression and Exponential Smoothing, and deep learning models such as LSTM, LSTM-AE, and bi-directional LSTM-AE, are utilized. The dataset used is publicly available from the UAE government, Federal Competitiveness and Statistics Centre (FCSC) and consists of several attributes, such as the numbers of confirmed cases, recovered cases, deaths, tests, and vaccinations. An additional categorical attribute is manually added to the dataset describing whether an event has taken place, such as a national holiday or a sanitization drive, to study the effect of such events on the pandemic trends. Experimental results showed that the Univariate LSTM model with an input of a five-day history of Confirmed Cases achieved the best performance with an RMSE of 275.85, surpassing the current state of the art related to the UAE by over 30%. It was also found that the bi-directional LSTMs performed relatively well. The approach proposed in the paper can be applied to monitor similar infectious disease outbreaks and thus contribute to strengthening the authorities’ preparedness for future pandemics. Full article

Papaya contains high amounts of vitamins A, C, riboflavin, thiamine, niacin, ascorbic acid, potassium, and carotenoids. It is confirmed by several studies that all food waste parts such as the fruit peels, seeds, and leaves of papaya are potential sources of phenolic compounds, particularly in the peel. Considering the presence of numerous bioactive compounds in papaya fruit peels, the current study reports a rapid, cheap, and environmentally friendly method for the production of gold nanoparticles (AuNPs) employing food biowaste (vegetable papaya peel extract (VPPE)) and investigated its antioxidant, antidiabetic, tyrosinase inhibition, anti-inflammatory, antibacterial, and photocatalytic degradation potentials. The phytochemical analysis gave positive results for tannins, saponins, steroids, cardiac steroidal glycoside, protein, and carbohydrates. The manufactured VPPE-AuNPs were studied by UV–Vis scan (with surface plasmon resonance of 552 nm), X-ray diffraction analysis (XRD) (with average crystallite size of 44.41 nm as per the Scherrer equation), scanning electron microscopy–energy-dispersive X-ray (SEM-EDS), thermogravimetric analysis (TGA), Fourier transform infrared spectroscopy (FT-IR), particle size, zeta potential, etc. The mean dimension of the manufactured VPPE-AuNPs is 112.2 d.nm (PDI—0.149) with a −26.1 mV zeta potential. The VPPE-AuNPs displayed a significant antioxidant effect (93.24% DPPH scavenging and 74.23% SOD inhibition at 100 µg/mL); moderate tyrosinase effect (with 30.76%); and substantial α-glucosidase (95.63%) and α-amylase effect (50.66%) at 100 µg/mL. Additionally, it was found to be very proficient in the removal of harmful methyl orange and methylene blue dyes with degradation of 34.70% at 3 h and 24.39% at 5 h, respectively. Taken altogether, the VPPE-AuNPs have been proven to possess multiple biopotential activities, which can be explored by the food, cosmetics, and biomedical industries. Full article

The aim of the study was to determine the effect of step load in hypoxia on the effectiveness of preoperative rehabilitation (PR) and hormone levels based on a case study. Introduction: We assessed the impact of variables such as rate of movement and time under tension (TUT) in normobaric hypoxia on the levels of growth hormone (GH), insulin-like growth factor 1 (IGF-1), and erythropoietin (EPO). Additionally, the impact of step load on the hypertrophy and strength of knee extensors and flexors was assessed. Methods: The work uses a case study, the research subject of which was a 23-year-old female professional handball player. The tests included an isokinetic assessment of the peak torque of knee extensors and flexors as well as body composition analysis. Results: The results showed a more than (10.81-fold) increase in GH after the microcycle with time under tension (TUT). The deficit between the lower limbs was also reduced. Conclusions: Using a hypoxic environment based on an appropriate altitude, combined with changes such as a short rest break between sets and a controlled tempo of movement with an eccentric phase, TUT may offer an alternative to the PR process, especially among athletes who care about fast RTS. Full article

Electrokinetic (EK) microsystems, which are capable of performing separations without the need for labeling analytes, are a rapidly growing area in microfluidics. The present work demonstrated three distinct binary microbial separations, computationally modeled and experimentally performed, in an insulator-based EK (iEK) system stimulated by DC-biased AC potentials. The separations had an increasing order of difficulty. First, a separation between cells of two distinct domains (Escherichia coli and Saccharomyces cerevisiae) was demonstrated. The second separation was for cells from the same domain but different species (Bacillus subtilis and Bacillus cereus). The last separation included cells from two closely related microbial strains of the same domain and the same species (two distinct S. cerevisiae strains). For each separation, a novel computational model, employing a continuous spatial and temporal function for predicting the particle velocity, was used to predict the retention time ($t_{R,p}$) of each cell type, which aided the experimentation. All three cases resulted in separation resolution values $R_s>1.5,$ indicating complete separation between the two cell species, with good reproducibility between the experimental repetitions (deviations < 6%) and good agreement (deviations < 18%) between the predicted $t_{R,p}$ and experimental ($t_{R,e}$) retention time values. This study demonstrated the potential of DC-biased AC iEK systems for performing challenging microbial separations. Full article

As technology continues to evolve, so too do privacy concerns individuals have about technology. This is especially true when individuals share highly sensitive, personal content through technology. When individuals sext, they are sharing sexually explicit messages, photos, and videos with another person. Two theories are interrogated in how they may apply to sexting and privacy: communication privacy management theory and privacy calculus. Utilizing these theories, privacy is highlighted in this article as a negotiation process between partners and technologies. Individuals must consider who they share material with and the channels they use, and these theories can help in developing a better understanding of these processes. Sexting can be a positive influence on adults’ romantic relationships, whether serious or casual; yet, they need to be able to engage in these behaviors in ways that encourage trust both interpersonally and with their technology. Full article

Objective: To assess the association between pretreatment thrombocytosis, anemia, and leukocytosis and overall survival (OS) of advanced-stage EOC. Furthermore, to develop nomograms using established prognostic factors and pretreatment hematologic parameters to predict the OS of advanced EOC patients. Methods: Advanced-stage EOC patients treated between January 1996 and January 2010 in eastern Netherlands were included. Survival outcomes were compared between patients with and without pretreatment thrombocytosis (≥450,000 platelets/µL), anemia (hemoglobin level of <7.5 mmol/L), or leukocytosis (≥11.0 × 10⁹ leukocytes/L). Three nomograms (for ≤3-, ≥5-, and ≥10-year OS) were developed. Candidate predictors were fitted into multivariable logistic regression models. Multiple imputation was conducted. Model performance was assessed on calibration, discrimination, and Brier scores. Bootstrap validation was used to correct for model optimism. Results: A total of 773 advanced-stage (i.e., FIGO stages IIB–IV) EOC patients were included. The median [interquartile range, IQR] OS was 2.3 [1.3–4.2] and 3.0 [1.4–7.0] years for patients with and without pretreatment thrombocytosis (p < 0.01). The median OS was not notably different for patients with and without pretreatment leukocytosis (p = 0.58) or patients with and without pretreatment anemia (p = 0.07). The final nomograms comprised established predictors with either pretreatment leukocyte or platelet count. The ≥5- and ≥10-year OS models demonstrated good calibration and adequate discrimination with optimism-corrected c-indices [95%-CI] of 0.76 [0.72–0.80] and 0.78 [0.73–0.83], respectively. The ≤3-year OS model demonstrated suboptimal performance with an optimism-corrected c-index of 0.71 [0.66–0.75]. Conclusions: Pretreatment thrombocytosis is associated with poorer EOC survival. Two well-performing models predictive of ≥5-year and ≥10-year OS in advanced-stage EOC were developed and internally validated. Full article

Introduction: Solid pseudopapillary neoplasms (SPNs) are rare and mainly originate from the pancreas. SPNs originating from the ovary (SPN-O) are extremely rare, and only 13 cases have been reported in the English literature since 2010. Case: We report a 31-year-old woman with SPN-O accompanied by multiple metastases in the abdominal cavity. The patient underwent staging surgery and cytoreduction. Furthermore, the multidisciplinary board decided on adjuvant chemotherapy with an FP regimen (fluorouracil plus cisplatin) because a microscopic metastasis was discovered in the peritoneum near the appendix. Next-generation sequencing showed some pathologic mutations of oncogenes/cancer-associated genes, including CTNNB1 and TP53. This is the fourteenth case of SPN-O and the first one to demonstrate the TP53 pathogenic mutant variant in SPN-O. The patient showed 8 months of disease-free survival until February 2024. Conclusion: The combination of R0 cytoreduction with FOLFIRI chemotherapy appears to be an effective and feasible treatment option. Full article

Malignant melanoma represents a form of skin cancer characterized by a bleak prognosis and heightened resistance to traditional therapies. Quercetin has demonstrated notable anti-carcinogenic, anti-inflammatory, anti-oxidant, and pharmacological effects across various cancer types. However, the intricate relationship between quercetin’s anti-cancer properties and ganglioside expression in melanoma remains incompletely understood. In this study, quercetin manifests specific anti-proliferative, anti-migratory, and cell-cycle arrest effects, inducing mitochondrial dysfunction and apoptosis in two melanoma cancer cell lines. This positions quercetin as a promising candidate for treating malignant melanoma. Moreover, our investigation indicates that quercetin significantly reduces the expression levels of ganglioside GD3 and its synthetic enzyme. Notably, this reduction is achieved through the inhibition of the FAK/paxillin/Akt signaling pathway, which plays a crucial role in cancer development. Taken together, our findings suggest that quercetin may be a potent anti-cancer drug candidate for the treatment of malignant melanoma. Full article

The study of dynamic singularity formation in spacetime, focusing on scalar field collapse models, is analyzed. We revisit key findings regarding open spatial topologies, concentrating on minimal conditions necessary for singularity and apparent horizon formation. Moreover, we examine the stability of initial data in the dynamical system governed by Einstein’s equations, considering variations in parameters that influence naked singularity formation. We illustrate how these results apply to a family of scalar field models, concluding with a discussion on the concept of genericity in singularity studies. Full article

Power quality improvement and Power quality disturbance (PQD) detection are two significant concerns that must be addressed to ensure an efficient power distribution within the utility grid. When the process to analyze PQD is migrated to real-time platforms, the possible occurrence of a phase mismatch can affect the algorithm’s accuracy; this paper evaluates phase shifting as an additional stage in signal acquisition for detecting and classifying eight types of single power quality disturbances. According to their mathematical models, a set of disturbances was generated using an arbitrary waveform generator BK Precision 4064. The acquisition, detection, and classification stages were embedded into a BeagleBone Black. The detection stage was performed using multiresolution analysis. The feature vectors of the acquired signals were obtained from the combination of Shannon entropy and log-energy entropy. For classification purposes, four types of classifiers were trained: multilayer perceptron, K-nearest neighbors, probabilistic neural network, and decision tree. The results show that incorporating a phase-shifting stage as a preprocessing stage significantly improves the classification accuracy in all cases. Full article

Previous studies on the clap–fling mechanism have predominantly focused on the initial downward and forward phases of flight in miniature insects, either during hovering or forward flight. However, this study presents the first comprehensive kinematic data of Coccinella septempunctata during climbing flight. It reveals, for the first time, that a clap-and-fling mechanism occurs during the initial upward and backward phase of the hind wings’ motion. This discovery addresses the previously limited understanding of the clap-and-fling mechanism by demonstrating that, during the clap motion, the leading edges of beetle’s wings come into proximity to form a figure-eight shape before rotating around their trailing edge to open into a “V” shape. By employing numerical solutions to solve Navier–Stokes (N-S) equations, we simulated both single hind wings’ and double hind wings’ aerodynamic conditions. Our findings demonstrate that this fling mechanism not only significantly enhances the lift coefficient by approximately 9.65% but also reduces the drag coefficient by about 1.7%, indicating an extension of the applicability range of this clap-and-fling mechanism beyond minute insect flight. Consequently, these insights into insect flight mechanics deepen our understanding of their biological characteristics and inspire advancements in robotics and biomimetics. Full article

This study introduces an innovative version of a recently studied converter. A Double Dual Ćuk Converter was recently studied with advantages like the possibility of designing it for achieving a low-input current ripple. The proposed converter, called the Improved Double Dual Ćuk Converter, maintains the advantages of the former one, and it is characterized by requiring one less capacitor and inductor than its predecessor. This allows addressing the challenge of optimizing the topology to reduce component count without compromising the operation; this work proposes an efficient design methodology based on theoretical analysis and experimental validation. Results demonstrate that the improved topology not only retains the advantages of the previous version, including high efficiency and robustness, but also enhances power density by reducing the number of components. These advancements open new possibilities for applications requiring compact and efficient power converters, such as renewable energy systems, electric vehicles, and portable power supply systems. This work underscores the importance of continuous innovation in power converter design and lays the groundwork for future research aimed at optimizing converter topologies. A detailed discussion of the operating principles and modeling of the converter is provided. Furthermore, simulation outcomes highlighting differences in steady-state duration, output voltage, input current ripple, and operational efficiency are shared. The results from an experimental test bench are also presented to corroborate the efficacy of the improved converter. Full article

The performance of the no-till seeder is one of the most important factors that affect the success of the no-tillage. Striking the right balance between furrow opener design and residue cover is essential for optimizing seeding conditions and ensuring sustainable agricultural practices that promote both soil conservation and high-yield crop production. This study investigates the impact of residue cover on no-tillage maize seeding after wheat harvest, focusing on plant spacing, seeding depth, mean emergence time, and percent emergence. Trials with hoe-type and double-disc-type furrow openers, accompanied by plain- or ripple-disc-type coulters, were conducted in Antalya, Turkey. The results indicate that residue cover had no significant effect on mean plant spacing, but a higher residue cover increased spacing variation. The seeding depth in hoe-type furrow opener trials remained consistent, while double-disc-type furrow openers showed lower depths with 80% and 90% residue covers. The percentage of plant emergence and mean emergence time decreased as the residue cover increased in double-disc-type furrow opener trials. At 90% residue cover, PE decreased to 60%. The impact of disc coulters on hoe-type furrow openers was limited, but they increased seeding depth and MET in double-disc-type furrow openers. These findings can help optimize residue management for improved efficiency in no-till farming systems. Full article