The 2023 MDPI Annual Report has
been released!
 
17 pages, 7420 KiB  
Article
Performance of Earth Plasters with Graphene-Based Additive
by Paola Gallo Stampino, Letizia Ceccarelli, Marco Caruso, Laura Mascheretti, Giovanni Dotelli and Sergio Sabbadini
Materials 2024, 17(10), 2356; https://doi.org/10.3390/ma17102356 (registering DOI) - 15 May 2024
Abstract
A central debate is the improvement in the mechanical and water resistance of sustainable earthen architecture without additives or stabilizers. This innovative work aims to test the effects of a graphene-based additive, optimized for the improvement in concrete properties, on the strength and [...] Read more.
A central debate is the improvement in the mechanical and water resistance of sustainable earthen architecture without additives or stabilizers. This innovative work aims to test the effects of a graphene-based additive, optimized for the improvement in concrete properties, on the strength and water resistance of raw-earth plasters without any stabilizer other than sand. Given the heterogeneous nature of raw earth, three different soils were tested by adding three increasing graphene-based additive contents (0.01, 0.05 and 0.1 wt% of the earth–sand proportion). The link between soil intrinsic properties, i.e., geotechnical and mineralogical properties, and their interaction with the additive were investigated through geotechnical characterization, as well as mineralogical characterization, by XRD and ATR-FTIR analyses. The experimental tests carried out focused on the adhesion properties of the twelve different plasters on standard hollow bricks and on their interaction with water through capillary rise tests and erosion resistance tests. Conclusion from the experimental tests suggests that the graphene-based additive in earth plasters, by increasing the cohesion of the mixture, improves their adhesion performance. Full article
(This article belongs to the Special Issue Advance in Sustainable Construction Materials)
Show Figures

Figure 1

20 pages, 993 KiB  
Article
A Drone-Assisted Anonymous Authentication and Key Agreement Protocol with Access Control for Accident Rescue in the Internet of Vehicles
by Jihu Zheng, Haixin Duan, Chenyu Wang, Qiang Cao, Guoai Xu and Rui Fang
Electronics 2024, 13(10), 1939; https://doi.org/10.3390/electronics13101939 (registering DOI) - 15 May 2024
Abstract
The drone-assisted Internet of Vehicles (DIoV) displays great potential in the punctual provision of rescue services without geographical limitations. To ensure data security in accident response and rescue services, authentication schemes with access control are employed. These schemes ensure that only specific rescue [...] Read more.
The drone-assisted Internet of Vehicles (DIoV) displays great potential in the punctual provision of rescue services without geographical limitations. To ensure data security in accident response and rescue services, authentication schemes with access control are employed. These schemes ensure that only specific rescue vehicle operators acting within a valid period can achieve mutual authentication from a designated processor, while access for mismatched, revoked, or expired users is denied. However, the current alternatives fail to ensure session key forward secrecy, entities’ mutual authentication, and user anonymity, thereby compromising users’ privacy and the security of communications. Moreover, executing too many time-consuming operations on vehicles’ resource-constrained devices inevitably degrades the performance of the authentication protocol. Balancing security and performance in the design of an authentication protocol with access control presents a significant challenge. To address this, a more efficient and robust authentication with access control has been designed. The proposed protocol ensures user anonymity through dynamic pseudonym allocation, achieves forward secrecy by excluding the long-term key from session key generation, and obtains mutual authentication by verifying the integrity of the messages exchanged. According to the security and performance analysis, it is demonstrated that the proposal is a robust, efficient, and cost-effective solution. In particular, the proposal can reduce the computational overhead by 66% compared to recent alternatives. Full article
(This article belongs to the Special Issue Cryptography in Network Security)
15 pages, 1296 KiB  
Article
Obtaining and Characterization of an Interspecific Hybrid between Lilium callosum and ‘Snow Queen’ and Evaluation of the Botrytis Stress Response
by Yongyao Fu, Shulin Lu, Chengchen Liu, Chaojun Ding, Xiaoyu Wang, Xinrong Li, Sijia Jiang and Liping Yang
Plants 2024, 13(10), 1376; https://doi.org/10.3390/plants13101376 (registering DOI) - 15 May 2024
Abstract
To cultivate excellent lily germplasms, an interspecific hybrid (LC×SQ-01) was successfully obtained by using a cut-style pollination method in which the rare wild lily Lilium callosum was used as the female parent and the cut flower L. longiflorum ‘Snow Queen’ was used as [...] Read more.
To cultivate excellent lily germplasms, an interspecific hybrid (LC×SQ-01) was successfully obtained by using a cut-style pollination method in which the rare wild lily Lilium callosum was used as the female parent and the cut flower L. longiflorum ‘Snow Queen’ was used as the male parent. The morphological features of LC×SQ-01 included height, leaf length, and width, which were observed to be between those of the parents in the tissue-cultured seedlings. The height and leaf length of LC×SQ-01 were more similar to those of the male parent, and the width was between the widths of the parents for field-generated plants. The epidermal cell length and the guard cell and stoma sizes were between those of both parents in tissue-cultured and field-generated plants. In addition, the shapes of the epidermal cells and anticlinal wall in LC×SQ-01 were more analogous to those in the male parent, while the stoma morphology was different from that of both parents. Fourteen pairs of polymorphic SSR primers were identified in both parents, and the validity of LC×SQ-01 was demonstrated by PCR amplification using five pairs of SSR primers. Flow cytometry and root tip squashing assays revealed that LC×SQ-01 was a diploid plant, similar to its parents. Furthermore, the LC×SQ-01 hybrid was more resistant to B. cinerea than its parents, and it also showed much greater peroxidase (POD) and catalase (CAT) activity than the parents. These results lay a foundation for breeding a new high-resistance and ornamental lily variety. Full article
(This article belongs to the Special Issue Flower Germplasm Resource and Genetic Breeding)
27 pages, 2007 KiB  
Review
GNSS Reflectometry-Based Ocean Altimetry: State of the Art and Future Trends
by Tianhe Xu, Nazi Wang, Yunqiao He, Yunwei Li, Xinyue Meng, Fan Gao and Ernesto Lopez-Baeza
Remote Sens. 2024, 16(10), 1754; https://doi.org/10.3390/rs16101754 (registering DOI) - 15 May 2024
Abstract
For the past 20 years, Global Navigation Satellite System reflectometry (GNSS-R) technology has successfully shown its potential for remote sensing of the Earth’s surface, including ocean and land surfaces. It is a multistatic radar that uses the GNSS signals reflected from the Earth’s [...] Read more.
For the past 20 years, Global Navigation Satellite System reflectometry (GNSS-R) technology has successfully shown its potential for remote sensing of the Earth’s surface, including ocean and land surfaces. It is a multistatic radar that uses the GNSS signals reflected from the Earth’s surface to extract land and ocean characteristics. Because of its numerous advantages such as low cost, multiple signal sources, and all-day/weather and high-spatiotemporal-resolution observations, this new technology has attracted the attention of many researchers. One of its most promising applications is GNSS-R ocean altimetry, which can complement existing techniques such as tide gauging and radar satellite altimetry. Since this technology for ocean altimetry was first proposed in 1993, increasing progress has been made including diverse methods for processing reflected signals (such as GNSS interferometric reflectometry, conventional GNSS-R, and interferometric GNSS-R), different instruments (such as an RHCP antenna with one geodetic receiver, a linearly polarized antenna, and a system of simultaneously used RHCP and LHCP antennas with a dedicated receiver), and different platform applications (such as ground-based, air-borne, or space-borne). The development of multi-mode and multi-frequency GNSS, especially for constructing the Chinese BeiDou Global Navigation Satellite System (BDS-3), has enabled more free signals to be used to further promote GNSS-R applications. The GNSS has evolved from its initial use of GPS L1 and L2 signals to include other GNSS bands and multi-GNSS signals. Using more advanced, multi-frequency, and multi-mode signals will bring new opportunities to develop GNSS-R technology. In this paper, studies of GNSS-R altimetry are reviewed from four perspectives: (1) classifications according to different data processing methods, (2) different platforms, (3) development of different receivers, and (4) our work. We overview the current status of GNSS-R altimetry and describe its fundamental principles, experiments, recent applications to ocean altimetry, and future directions. Full article
(This article belongs to the Special Issue SoOP-Reflectometry or GNSS-Reflectometry: Theory and Applications)
22 pages, 2891 KiB  
Article
Virtual Sensing of Key Variables in the Hydrogen Production Process: A Comparative Study of Data-Driven Models
by Yating Yao, Yupeng Xing, Ziteng Zuo, Chihang Wei and Weiming Shao
Sensors 2024, 24(10), 3143; https://doi.org/10.3390/s24103143 (registering DOI) - 15 May 2024
Abstract
Hydrogen is an ideal energy carrier manufactured mainly by the natural gas steam reforming hydrogen production process. The concentrations of CH4COCO2, and H2 in this process are key variables related to product quality, which thus [...] Read more.
Hydrogen is an ideal energy carrier manufactured mainly by the natural gas steam reforming hydrogen production process. The concentrations of CH4COCO2, and H2 in this process are key variables related to product quality, which thus need to be controlled accurately in real-time. However, conventional measurement methods for these concentrations suffer from significant delays or huge acquisition and upkeep costs. Virtual sensors effectively compensate for these shortcomings. Unfortunately, previously developed virtual sensors have not fully considered the complex characteristics of the hydrogen production process. Therefore, a virtual sensor model, called “moving window-based dynamic variational Bayesian principal component analysis (MW-DVBPCA)” is developed for key gas concentration estimation. The MW-DVBPCA considers complicated characteristics of the hydrogen production process, involving dynamics, time variations, and transportation delays. Specifically, the dynamics are modeled by the finite impulse response paradigm, the transportation delays are automatically determined using the differential evolution algorithm, and the time variations are captured by the moving window method. Moreover, a comparative study of data-driven virtual sensors is carried out, which is sporadically discussed in the literature. Meanwhile, the performance of the developed MW-DVBPCA is verified by the real-life natural gas steam reforming hydrogen production process. Full article
Show Figures

Figure 1

30 pages, 16407 KiB  
Article
Automating Fault Test Cases Generation and Execution for Automotive Safety Validation via NLP and HIL Simulation
by Ayman Amyan, Mohammad Abboush, Christoph Knieke and Andreas Rausch
Sensors 2024, 24(10), 3145; https://doi.org/10.3390/s24103145 (registering DOI) - 15 May 2024
Abstract
The complexity and the criticality of automotive electronic implanted systems are steadily advancing and that is especially the case for automotive software development. ISO 26262 describes requirements for the development process to confirm the safety of such complex systems. Among these requirements, fault [...] Read more.
The complexity and the criticality of automotive electronic implanted systems are steadily advancing and that is especially the case for automotive software development. ISO 26262 describes requirements for the development process to confirm the safety of such complex systems. Among these requirements, fault injection is a reliable technique to assess the effectiveness of safety mechanisms and verify the correct implementation of the safety requirements. However, the method of injecting the fault in the system under test in many cases is still manual and depends on an expert, requiring a high level of knowledge of the system. In complex systems, it consumes time, is difficult to execute, and takes effort, because the testers limit the fault injection experiments and inject the minimum number of possible test cases. Fault injection enables testers to identify and address potential issues with a system under test before they become actual problems. In the automotive industry, failures can have serious hazards. In these systems, it is essential to ensure that the system can operate safely even in the presence of faults. We propose an approach using natural language processing (NLP) technologies to automatically derive the fault test cases from the functional safety requirements (FSRs) and execute them automatically by hardware-in-the-loop (HIL) in real time according to the black-box concept and the ISO 26262 standard. The approach demonstrates effectiveness in automatically identifying fault injection locations and conditions, simplifying the testing process, and providing a scalable solution for various safety-critical systems. Full article
(This article belongs to the Section Vehicular Sensing)
14 pages, 3119 KiB  
Article
Quantitative Analysis of Fungal Contamination of Different Herbal Medicines in China
by Gang Wang, Mingyue Jiao, Junqiang Hu, Yiren Xun, Longyun Chen, Jianbo Qiu, Fang Ji, Yin-Won Lee, Jianrong Shi and Jianhong Xu
Toxins 2024, 16(5), 229; https://doi.org/10.3390/toxins16050229 (registering DOI) - 15 May 2024
Abstract
Herbal medicines are widely used for clinical purposes worldwide. These herbs are susceptible to phytopathogenic fungal invasion during the culturing, harvesting, storage, and processing stages. The threat of fungal and mycotoxin contamination requires the evaluation of the health risks associated with these herbal [...] Read more.
Herbal medicines are widely used for clinical purposes worldwide. These herbs are susceptible to phytopathogenic fungal invasion during the culturing, harvesting, storage, and processing stages. The threat of fungal and mycotoxin contamination requires the evaluation of the health risks associated with these herbal medicines. In this study, we collected 138 samples of 23 commonly used herbs from 20 regions in China, from which we isolated a total of 200 phytopathogenic fungi. Through morphological observation and ITS sequencing, 173 fungal isolates were identified and classified into 24 genera, of which the predominant genera were Fusarium (27.74%) and Alternaria (20.81%), followed by Epicoccum (11.56%), Nigrospora (7.51%), and Trichocladium (6.84%). Quantitative analysis of the abundance of both Fusarium and Alternaria in herbal medicines via RT-qPCR revealed that the most abundant fungi were found on the herb Taraxacum mongolicum, reaching 300,000 copies/μL for Fusarium and 700 copies/μL for Alternaria. The in vitro mycotoxin productivities of the isolated Fusarium and Alternaria strains were evaluated by using liquid chromatography–tandem mass spectrometry (LC-MS/MS), and it was found that the Fusarium species mainly produced the acetyl forms of deoxynivalenol, while Alternaria species mainly produced altertoxins. These findings revealed widely distributed fungal contamination in herbal medicines and thus raise concerns for the sake of the quality and safety of herbal medicines. Full article
20 pages, 668 KiB  
Article
Assessment of the Safety and Probiotic Properties of Enterococcus faecium B13 Isolated from Fermented Chili
by Jingmin Xiao, Cai Chen, Zhuxian Fu, Shumin Wang and Fan Luo
Microorganisms 2024, 12(5), 994; https://doi.org/10.3390/microorganisms12050994 (registering DOI) - 15 May 2024
Abstract
Enterococcus faecium B13, selected from fermentation chili, has been proven to promote animal growth by previous studies, but it belongs to opportunistic pathogens, so a comprehensive evaluation of its probiotic properties and safety is necessary. In this study, the probiotic properties and safety [...] Read more.
Enterococcus faecium B13, selected from fermentation chili, has been proven to promote animal growth by previous studies, but it belongs to opportunistic pathogens, so a comprehensive evaluation of its probiotic properties and safety is necessary. In this study, the probiotic properties and safety of B13 were evaluated at the genetic and phenotype levels in vitro and then confirmed in vivo. The genome of B13 contains one chromosome and two plasmids. The average nucleotide identity indicated that B13 was most closely related to the fermentation-plant-derived strain. The strain does not carry the major virulence genes of the clinical E. faecium strains but contains aac(6′)-Ii, ant (6)-Ia, msrC genes. The strain had a higher tolerance to acid at pH 3.0, 4.0, and 0.3% bile salt and a 32.83% free radical DPPH clearance rate. It can adhere to Caco-2 cells and reduce the adhesion of E. coli to Caco-2 cells. The safety assessment revealed that the strain showed no hemolysis and did not exhibit gelatinase, ornithine decarboxylase, lysine decarboxylase, or tryptophanase activity. It was sensitive to twelve antibiotics but was resistant to erythromycin, rifampicin, tetracycline, doxycycline, and minocycline. Experiments in vivo have shown that B13 can be located in the ileum and colon and has no adverse effects on experiment animals. After 28 days of feeding, B13 did not remarkable change the α-diversity of the gut flora or increase the virulence genes. Our study demonstrated that E. faecium B13 may be used as a probiotic candidate. Full article
(This article belongs to the Section Antimicrobial Agents and Resistance)
12 pages, 461 KiB  
Article
Health-Related Lifestyles among University Students: Focusing on Eating Habits and Physical Activity
by Elena Lonati, Emanuela Cazzaniga, Roberta Adorni, Francesco Zanatta, Michael Belingheri, Matteo Colleoni, Michele Augusto Riva, Patrizia Steca and Paola Palestini
Int. J. Environ. Res. Public Health 2024, 21(5), 626; https://doi.org/10.3390/ijerph21050626 (registering DOI) - 15 May 2024
Abstract
The transition to higher education at University is a critical moment for young adults to acquire unhealthy habits regarding physical activity (PA) and adherence to a healthy diet. Negative behaviors might be maintained in the years to come with a major risk of [...] Read more.
The transition to higher education at University is a critical moment for young adults to acquire unhealthy habits regarding physical activity (PA) and adherence to a healthy diet. Negative behaviors might be maintained in the years to come with a major risk of suffering from a Non-Communicable Disease. This study aims to determine the relationship between diet and PA in the student community of University of Milano-Bicocca. Students between 18 and 30 years old completed an online survey (6949 students). Two analyses of covariance (ANCOVA), chi-square tests of independence, and a binomial logistic regression were performed to examine the relationship between adequacy of food consumption and PA, in association also with sociodemographic characteristics. Data show a strong correlation between behaviors analyzed, with a proportional positive association between PA and healthy diet. Nevertheless, a third of the sample students incur in incorrect habits for both diet and PA. Further, students performing intensive PA have the healthiest food consumption in general but the worst red meat and pork intake. Accordingly, men practice more PA but have a less adequate diet, exactly contrary to women. In conclusion, policies promoting consciousness of well-being would transform Universities into healthy hubs for virtuous habits. Full article
(This article belongs to the Special Issue Lifestyle Behaviors and Health Promotion in Young People)
12 pages, 778 KiB  
Article
Defining the Minimal Long-Term Follow-Up Data Elements for Newborn Screening
by Yvonne Kellar-Guenther, Lauren Barringer, Katherine Raboin, Ginger Nichols, Kathy Y. F. Chou, Kathy Nguyen, Amy R. Burke, Sandy Fawbush, Joyal B. Meyer, Morna Dorsey, Amy Brower, Kee Chan, Mei Lietsch, Jennifer Taylor, Michele Caggana and Marci K. Sontag
Int. J. Neonatal Screen. 2024, 10(2), 37; https://doi.org/10.3390/ijns10020037 (registering DOI) - 15 May 2024
Abstract
Newborn screening (NBS) is hailed as a public health success, but little is known about the long-term outcomes following a positive newborn screen. There has been difficulty gathering long-term follow-up (LTFU) data consistently, reliably, and with minimal effort. Six programs developed and tested [...] Read more.
Newborn screening (NBS) is hailed as a public health success, but little is known about the long-term outcomes following a positive newborn screen. There has been difficulty gathering long-term follow-up (LTFU) data consistently, reliably, and with minimal effort. Six programs developed and tested a core set of minimal LTFU data elements. After an iterative data collection process and the development of a data collection tool, the group agreed on the minimal LTFU data elements. The denominator captured all infants with an NBS diagnosis, accounting for children who moved or died prior to the follow-up year. They also agreed on three LTFU outcomes: if the child was still alive, had contact with a specialist, and received appropriate care specific to their diagnosis within the year. The six programs representing NBS public health programs, clinical providers, and research programs provided data across multiple NBS disorders. In 2022, 83.8% (563/672) of the children identified by the LTFU programs were alive and living in the jurisdiction; of those, 92.0% (518/563) saw a specialist, and 87.7% (494/563) received appropriate care. The core LTFU data elements can be applied as a foundation to address the impact of early diagnosis by NBS within and across jurisdictions. Full article
Show Figures

Figure 1

23 pages, 1416 KiB  
Article
Fractional-Order Dynamics in Epidemic Disease Modeling with Advanced Perspectives of Fractional Calculus
by Muhammad Riaz, Zareen A. Khan, Sadique Ahmad and Abdelhamied Ashraf Ateya
Fractal Fract. 2024, 8(5), 291; https://doi.org/10.3390/fractalfract8050291 (registering DOI) - 15 May 2024
Abstract
Piecewise fractional-order differential operators have received more attention in recent years because they can be used to describe various evolutionary dynamical problems to investigate crossover behaviors. In this manuscript, we use the aforementioned operators to investigate a mathematical model of COVID-19. By utilizing [...] Read more.
Piecewise fractional-order differential operators have received more attention in recent years because they can be used to describe various evolutionary dynamical problems to investigate crossover behaviors. In this manuscript, we use the aforementioned operators to investigate a mathematical model of COVID-19. By utilizing fractional calculus, our approach aims to capture the crossover dynamics of disease spread, considering heterogeneity and transitions between epidemic phases. This research seeks to develop a framework using specialized mathematical techniques, such as the Caputo fractional derivative, with the potential to investigate the crossover dynamical behaviors of the considered epidemic model. The anticipated contribution lies in bridging fractional calculus and epidemiology, offering insights for both theoretical advancements and practical public health interventions. In order to improve our understanding of epidemic dynamics and support, we used MATLAB to simulate numerical results for a visual representation of our findings. For this interpretation, we used various fractional-order values. In addition, we also compare our simulated results with some reported results for infected and death classes to demonstrate the efficiency of our numerical method. Full article
Show Figures

Figure 1

18 pages, 1543 KiB  
Article
Texture-Based Classification to Overcome Uncertainty between COVID-19 and Viral Pneumonia Using Machine Learning and Deep Learning Techniques
by Omar Farghaly and Priya Deshpande
Diagnostics 2024, 14(10), 1017; https://doi.org/10.3390/diagnostics14101017 (registering DOI) - 15 May 2024
Abstract
The SARS-CoV-2 virus, responsible for COVID-19, often manifests symptoms akin to viral pneumonia, complicating early detection and potentially leading to severe COVID pneumonia and long-term effects. Particularly affecting young individuals, the elderly, and those with weakened immune systems, the accurate classification of COVID-19 [...] Read more.
The SARS-CoV-2 virus, responsible for COVID-19, often manifests symptoms akin to viral pneumonia, complicating early detection and potentially leading to severe COVID pneumonia and long-term effects. Particularly affecting young individuals, the elderly, and those with weakened immune systems, the accurate classification of COVID-19 poses challenges, especially with highly dimensional image data. Past studies have faced limitations due to simplistic algorithms and small, biased datasets, yielding inaccurate results. In response, our study introduces a novel classification model that integrates advanced texture feature extraction methods, including GLCM, GLDM, and wavelet transform, within a deep learning framework. This innovative approach enables the effective classification of chest X-ray images into normal, COVID-19, and viral pneumonia categories, overcoming the limitations encountered in previous studies. Leveraging the unique textures inherent to each dataset class, our model achieves superior classification performance, even amidst the complexity and diversity of the data. Moreover, we present comprehensive numerical findings demonstrating the superiority of our approach over traditional methods. The numerical results highlight the accuracy (random forest (RF): 0.85; SVM (support vector machine): 0.70; deep learning neural network (DLNN): 0.92), recall (RF: 0.85, SVM: 0.74, DLNN: 0.93), precision (RF: 0.86, SVM: 0.71, DLNN: 0.87), and F1-Score (RF: 0.86, SVM: 0.72, DLNN: 0.89) of our proposed model. Our study represents a significant advancement in AI-based diagnostic systems for COVID-19 and pneumonia, promising improved patient outcomes and healthcare management strategies. Full article
(This article belongs to the Section Machine Learning and Artificial Intelligence in Diagnostics)
21 pages, 5640 KiB  
Article
Identifying Key Regulatory Genes in Drug Resistance Acquisition: Modeling Pseudotime Trajectories of Breast Cancer Single-Cell Transcriptome
by Keita Iida and Mariko Okada
Cancers 2024, 16(10), 1884; https://doi.org/10.3390/cancers16101884 (registering DOI) - 15 May 2024
Abstract
Single-cell RNA-sequencing (scRNA-seq) technology has provided significant insights into cancer drug resistance at the single-cell level. However, understanding dynamic cell transitions at the molecular systems level remains limited, requiring a systems biology approach. We present an approach that combines mathematical modeling with a [...] Read more.
Single-cell RNA-sequencing (scRNA-seq) technology has provided significant insights into cancer drug resistance at the single-cell level. However, understanding dynamic cell transitions at the molecular systems level remains limited, requiring a systems biology approach. We present an approach that combines mathematical modeling with a pseudotime analysis using time-series scRNA-seq data obtained from the breast cancer cell line MCF-7 treated with tamoxifen. Our single-cell analysis identified five distinct subpopulations, including tamoxifen-sensitive and -resistant groups. Using a single-gene mathematical model, we discovered approximately 560–680 genes out of 6000 exhibiting multistable expression states in each subpopulation, including key estrogen-receptor-positive breast cancer cell survival genes, such as RPS6KB1. A bifurcation analysis elucidated their regulatory mechanisms, and we mapped these genes into a molecular network associated with cell survival and metastasis-related pathways. Our modeling approach comprehensively identifies key regulatory genes for drug resistance acquisition, enhancing our understanding of potential drug targets in breast cancer. Full article
17 pages, 3335 KiB  
Article
Research on the Influence of the Material Removal Profile of a Spherical Polishing Tool on the Mid-Spatial Frequency Errors of Optical Surfaces
by Zhaohao He, Kuo Hai, Kailong Li, Jiahao Yu, Lingwei Wu, Lin Zhang, Xing Su, Lisheng Cai, Wen Huang and Wei Hang
Micromachines 2024, 15(5), 654; https://doi.org/10.3390/mi15050654 (registering DOI) - 15 May 2024
Abstract
Elastic spherical polishing tools effectively conform to the polishing surface and exhibit high efficiency in the removal of materials, so they are extensively used in the sub-aperture polishing stages of optical components. However, their processing is often accompanied by significant mid-spatial frequency (MSF) [...] Read more.
Elastic spherical polishing tools effectively conform to the polishing surface and exhibit high efficiency in the removal of materials, so they are extensively used in the sub-aperture polishing stages of optical components. However, their processing is often accompanied by significant mid-spatial frequency (MSF) errors, which critically degrade the performance of optical systems. To suppress the MSF errors generated during polishing with spherical tools, this study investigates the influence factor of MSF errors during the polishing process through an analysis of the convolution effect in material removal. A material removal profile model is established, and a uniform removal simulation is conducted to assess the influence of different shape material removal profiles on MSF errors. Simulation and experimental results show that a Gaussian-like shape material removal profile is more effective in suppressing the MSF errors during polishing compared to the “W” and trapezoidal shape material removal profiles. In addition, based on the characteristics of the RMS decreasing in a serrated trend with the decrease in path spacing, a path spacing optimization method considering the polishing efficiency is proposed to improve the polishing efficiency while controlling the MSF errors, and the effectiveness of the path spacing optimization method is verified by comparing the MSF error at the maximum theoretical path spacing and the path spacing that is less than this. Finally, the path spacing optimization method is used to polish single-crystal silicon to further illustrate its practicality. Full article
(This article belongs to the Special Issue Precision Optical Manufacturing and Processing)
14 pages, 873 KiB  
Article
Preweaning Purified Fucoidan Drench: Effects on Growth, Immune Response, and Intestinal Morphology in Weaned Piglets
by Bonnie Homer, Reza Barekatain, Kiro R. Petrovski, Kate J. Plush, Corinna Dwan, Darryl N. D’Souza, Paul J. Verma, Roy N. Kirkwood and Bryony S. Tucker
Animals 2024, 14(10), 1472; https://doi.org/10.3390/ani14101472 (registering DOI) - 15 May 2024
Abstract
Weaning stress imposes considerable physiological challenges on piglets, often manifesting in intestinal disturbances, such as inflammation and compromised barrier function, ultimately affecting growth and health outcomes. While conventional interventions, including antimicrobials, have effectively mitigated these sequelae, concerns surrounding antimicrobial resistance necessitate the exploration [...] Read more.
Weaning stress imposes considerable physiological challenges on piglets, often manifesting in intestinal disturbances, such as inflammation and compromised barrier function, ultimately affecting growth and health outcomes. While conventional interventions, including antimicrobials, have effectively mitigated these sequelae, concerns surrounding antimicrobial resistance necessitate the exploration of alternatives. Fucoidan, derived from brown seaweed, offers promise due to its antioxidant and anti-inflammatory effects. Previous research has been limited to the in-feed supplementation of partially purified fucoidan extracted from brown seaweed. The focus of the present study is assessing the effect of a preweaning drench with highly purified (85%) fucoidan on piglet growth, immune response, and intestinal morphology post-weaning. Forty-eight male piglets at 17 ± 3 days of age (5.67 ± 0.16 kg) were assigned to a saline (control), fucoidan, or antimicrobial group, receiving treatment as a single 18 mL oral drench three days before weaning. Monitoring for seven days post-weaning included body weight measurements, blood sample collection for the inflammatory protein assay, and small intestine morphological analysis. The findings revealed that the preweaning fucoidan drench did not elicit adverse effects on piglets. However, neither fucoidan nor antimicrobial drenches significantly enhanced growth parameters, immune markers, or intestinal morphology compared to that of the control-treated piglets (p > 0.05). The lack of response may be attributed to the high health status of the experimental cohort and the limitation of a single dosage. Future research should consider a more challenging production setting to evaluate the viability and optimal application of fucoidan as an antimicrobial alternative in the pig industry. Full article
(This article belongs to the Special Issue Piglets Nutrition and Management)
15 pages, 562 KiB  
Review
The Role of the Gap Junction Protein Connexin in Adrenal Gland Tumorigenesis
by Maja Mizdrak, Tina Ticinovic Kurir, Ivan Mizdrak, Marko Kumric, Mladen Krnic and Josko Bozic
Int. J. Mol. Sci. 2024, 25(10), 5399; https://doi.org/10.3390/ijms25105399 (registering DOI) - 15 May 2024
Abstract
Gap junctions (GJs) are important in the regulation of cell growth, morphology, differentiation and migration. However, recently, more attention has been paid to their role in the pathogenesis of different diseases as well as tumorigenesis, invasion and metastases. The expression pattern and possible [...] Read more.
Gap junctions (GJs) are important in the regulation of cell growth, morphology, differentiation and migration. However, recently, more attention has been paid to their role in the pathogenesis of different diseases as well as tumorigenesis, invasion and metastases. The expression pattern and possible role of connexins (Cxs), as major GJ proteins, under both physiological and pathological conditions in the adrenal gland, were evaluated in this review. The databases Web of Science, PubMed and Scopus were searched. Studies were evaluated if they provided data regarding the connexin expression pattern in the adrenal gland, despite current knowledge of this topic not being widely investigated. Connexin expression in the adrenal gland differs according to different parts of the gland and depends on ACTH release. Cx43 is the most studied connexin expressed in the adrenal gland cortex. In addition, Cx26, Cx32 and Cx50 were also investigated in the human adrenal gland. Cx50 as the most widespread connexin, along with Cx26, Cx29, Cx32, Cx36 and Cx43, has been expressed in the adrenal medulla with distinct cellular distribution. Considerable effort has recently been directed toward connexins as therapeutically targeted molecules. At present, there exist several viable strategies in the development of potential connexin-based therapeutics. The differential and hormone-dependent distribution of gap junctions within adrenal glands, the relatively large gap junction within this gland and the increase in the gap junction size and number following hormonal treatment would indicate that gap junctions play a pivotal role in cell functioning in the adrenal gland. Full article
(This article belongs to the Special Issue Molecular Aspects of Adrenal Diseases and Carcinoma)
18 pages, 5897 KiB  
Article
Synthesis and Catalytic Performance of Mo2C/MoS2 Composite Heterojunction Catalysts
by Congyi Zhang, Zhigang Pan and Yaqiu Tao
Materials 2024, 17(10), 2355; https://doi.org/10.3390/ma17102355 (registering DOI) - 15 May 2024
Abstract
Hydrogen, as a clean, safe, and efficient energy carrier, is one of the hot energy sources that have attracted much attention. Mo2C, due to the introduction of C atoms, makes the atomic spacing of the Mo lattice decrease and changes the [...] Read more.
Hydrogen, as a clean, safe, and efficient energy carrier, is one of the hot energy sources that have attracted much attention. Mo2C, due to the introduction of C atoms, makes the atomic spacing of the Mo lattice decrease and changes the width of the d-band, which makes the electronic properties of Mo2C similar to that of Pt noble metals, exhibiting excellent electrochemical hydrogen precipitation performance. MoS2, due to its special crystal structure and tunable electronic structure, has been widely studied. In this paper, Mo2C nanoparticles were prepared by high-temperature carbonization, and then two-dimensional layered MoS2 were be loaded on Mo2C nanoparticles by the hydrothermal method to synthesize Mo2C/MoS2 composite catalysts. Their electrochemical hydrogen precipitation (HER) performance under acidic conditions was tested. The above catalysts were also characterized by modern material testing methods such as XRD, SEM, TEM, and XPS. The results showed that the composite catalysts exhibited the most excellent electrochemical hydrogen precipitation performance at Mo2C/MoS2-3, with the lowest overpotential at a current density of 10 mA cm−2, Tafel slope, and electrochemical impedance. At the same time, the electrochemically active area was dramatically enhanced, with good stability under prolonged testing. The catalytic activity was significantly improved compared with that of Mo2C and MoS2. The characterization and experimental results indicate that the heterogeneous structure of Mo2C and MoS2 formed a built-in electric field between the two, which accelerated the electron transfer efficiency and provided more active sites. The Mo2C/MoS2 composite catalyst is a low-cost, easy-to-prepare, and high-efficiency electrochemical hydrogen precipitation catalyst, providing a new idea for developing green and clean energy. Full article
Show Figures

Figure 1

20 pages, 5838 KiB  
Article
Leucoverdazyls as Novel Potent Inhibitors of Enterovirus Replication
by Alexandrina S. Volobueva, Tatyana G. Fedorchenko, Galina N. Lipunova, Marina S. Valova, Valeriya A. Sbarzaglia, Anna S. Gladkikh, Olga I. Kanaeva, Natalia A. Tolstykh, Andrey N. Gorshkov and Vladimir V. Zarubaev
Pathogens 2024, 13(5), 410; https://doi.org/10.3390/pathogens13050410 (registering DOI) - 15 May 2024
Abstract
Enteroviruses (EV) are important pathogens causing human disease with various clinical manifestations. To date, treatment of enteroviral infections is mainly supportive since no vaccination or antiviral drugs are approved for their prevention or treatment. Here, we describe the antiviral properties and mechanisms of [...] Read more.
Enteroviruses (EV) are important pathogens causing human disease with various clinical manifestations. To date, treatment of enteroviral infections is mainly supportive since no vaccination or antiviral drugs are approved for their prevention or treatment. Here, we describe the antiviral properties and mechanisms of action of leucoverdazyls—novel heterocyclic compounds with antioxidant potential. The lead compound, 1a, demonstrated low cytotoxicity along with high antioxidant and virus-inhibiting activity. A viral strain resistant to 1a was selected, and the development of resistance was shown to be accompanied by mutation of virus-specific non-structural protein 2C. This resistant virus had lower fitness when grown in cell culture. Taken together, our results demonstrate high antiviral potential of leucoverdazyls as novel inhibitors of enterovirus replication and support previous evidence of an important role of 2C proteins in EV replication. Full article
(This article belongs to the Special Issue Hand–Foot–Mouth Disease)
Show Figures

Figure 1

22 pages, 3594 KiB  
Article
Protopine and Allocryptopine Interactions with Plasma Proteins
by Aleksandra Marciniak, Aleksandra Kotynia, Edward Krzyżak, Żaneta Czyżnikowska, Sylwia Zielińska, Weronika Kozłowska, Marcel Białas, Adam Matkowski and Anna Jezierska-Domaradzka
Int. J. Mol. Sci. 2024, 25(10), 5398; https://doi.org/10.3390/ijms25105398 (registering DOI) - 15 May 2024
Abstract
A comprehensive study of the interactions of human serum albumin (HSA) and α-1-acid glycoprotein (AAG) with two isoquinoline alkaloids, i.e., allocryptopine (ACP) and protopine (PP), was performed. The UV-Vis spectroscopy, molecular docking, competitive binding assays, and circular dichroism (CD) spectroscopy were used for [...] Read more.
A comprehensive study of the interactions of human serum albumin (HSA) and α-1-acid glycoprotein (AAG) with two isoquinoline alkaloids, i.e., allocryptopine (ACP) and protopine (PP), was performed. The UV-Vis spectroscopy, molecular docking, competitive binding assays, and circular dichroism (CD) spectroscopy were used for the investigations. The results showed that ACP and PP form spontaneous and stable complexes with HSA and AAG, with ACP displaying a stronger affinity towards both proteins. Molecular docking studies revealed the preferential binding of ACP and PP to specific sites within HSA, with site 2 (IIIA) being identified as the favored location for both alkaloids. This was supported by competitive binding assays using markers specific to HSA’s drug binding sites. Similarly, for AAG, a decrease in fluorescence intensity upon addition of the alkaloids to AAG/quinaldine red (QR) complexes indicated the replacement of the marker by the alkaloids, with ACP showing a greater extent of replacement than PP. CD spectroscopy showed that the proteins’ structures remained largely unchanged, suggesting that the formation of complexes did not significantly perturb the overall spatial configuration of these macromolecules. These findings are crucial for advancing the knowledge on the natural product–protein interactions and the future design of isoquinoline alkaloid-based therapeutics. Full article
(This article belongs to the Special Issue Investigation of Natural Products as Sources of Bioactive Molecules)
18 pages, 3025 KiB  
Article
Multi-Target Optimization Strategy for Unmanned Aerial Vehicle Formation in Forest Fire Monitoring Based on Deep Q-Network Algorithm
by Wenjia Liu, Sung-Ki Lyu, Tao Liu, Yu-Ting Wu and Zhen Qin
Drones 2024, 8(5), 201; https://doi.org/10.3390/drones8050201 (registering DOI) - 15 May 2024
Abstract
Forest fires often pose serious hazards, and the timely monitoring and extinguishing of residual forest fires using unmanned aerial vehicles (UAVs) can prevent re-ignition and mitigate the damage caused. Due to the urgency of forest fires, drones need to respond quickly during firefighting [...] Read more.
Forest fires often pose serious hazards, and the timely monitoring and extinguishing of residual forest fires using unmanned aerial vehicles (UAVs) can prevent re-ignition and mitigate the damage caused. Due to the urgency of forest fires, drones need to respond quickly during firefighting operations, while traditional drone formation deployment requires a significant amount of time. This paper proposes a pure azimuth passive positioning strategy for circular UAV formations and utilizes the Deep Q-Network (DQN) algorithm to effectively adjust the formation within a short timeframe. Initially, a passive positioning model for UAVs based on the relationships between the sides and angles of a triangle is established, with the closest point to the ideal position being selected as the position for the UAV to be located. Subsequently, a multi-target optimization model is developed, considering 10 UAVs as an example, with the objective of minimizing the number of adjustments while minimizing the deviation between the ideal and adjusted UAV positions. The DQN algorithm is employed to solve and design experiments for validation, demonstrating that the deviation between the UAV positions and the ideal positions, as well as the number of adjustments, are within acceptable ranges. In comparison to genetic algorithms, it saves approximately 120 s. Full article
(This article belongs to the Topic Application of Remote Sensing in Forest Fire)
Show Figures

Figure 1

29 pages, 1524 KiB  
Review
Advances in Nano-Functional Materials in Targeted Thrombolytic Drug Delivery
by Tengfei Ren, Yuexi Mi, Jingjing Wei, Xiangyuan Han, Xingxiu Zhang, Qian Zhu, Tong Yue, Wenhao Gao, Xudong Niu, Cuiyan Han and Bing Wei
Molecules 2024, 29(10), 2325; https://doi.org/10.3390/molecules29102325 (registering DOI) - 15 May 2024
Abstract
Thrombotic disease has been listed as the third most fatal vascular disease in the world. After decades of development, clinical thrombolytic drugs still cannot avoid the occurrence of adverse reactions such as bleeding. A number of studies have shown that the application of [...] Read more.
Thrombotic disease has been listed as the third most fatal vascular disease in the world. After decades of development, clinical thrombolytic drugs still cannot avoid the occurrence of adverse reactions such as bleeding. A number of studies have shown that the application of various nano-functional materials in thrombus-targeted drug delivery, combined with external stimuli, such as magnetic, near-infrared light, ultrasound, etc., enrich the drugs in the thrombus site and use the properties of nano-functional materials for collaborative thrombolysis, which can effectively reduce adverse reactions such as bleeding and improve thrombolysis efficiency. In this paper, the research progress of organic nanomaterials, inorganic nanomaterials, and biomimetic nanomaterials for drug delivery is briefly reviewed. Full article
(This article belongs to the Special Issue Advances in Nanomedicine and Nano-Based Drug Delivery System)
23 pages, 1315 KiB  
Review
Enhancing Flood Risk Management: A Comprehensive Review on Flood Early Warning Systems with Emphasis on Numerical Modeling
by Diego Fernández-Nóvoa, José González-Cao and Orlando García-Feal
Water 2024, 16(10), 1408; https://doi.org/10.3390/w16101408 (registering DOI) - 15 May 2024
Abstract
During recent decades there has been an increase in extreme flood events and their intensity in most regions, mainly driven by climate change. Furthermore, these critical events are expected to intensify in the future. Therefore, the improvement of preparedness, mitigation, and adaptation counterparts [...] Read more.
During recent decades there has been an increase in extreme flood events and their intensity in most regions, mainly driven by climate change. Furthermore, these critical events are expected to intensify in the future. Therefore, the improvement of preparedness, mitigation, and adaptation counterparts is mandatory. Many scientific fields are involved in this task, but from a meteorological and hydrological perspective, one of the main tools that can contribute to mitigating the impact of floods is the development of Early Warning Systems. In this sense, this paper presents a scientific literature review of some of the most representative Flood Early Warning Systems worldwide, many of which are currently fully operational, with a special focus on the numerical modeling component when it is developed and integrated into the system. Thus, from basic to technically complex, and from basin or regional to continental or global scales of application, these systems have been reviewed. In this sense, a brief description of their main features, operational procedures, and implemented numerical models is also depicted. Additionally, a series of indications regarding the key aspects of the newly developed FEWSs, based on recent trends and advancements in FEWSs development found in the literature, are also summarized. Thus, this work aims to provide a literature review useful to scientists and engineers involved in flood analysis to improve and develop supporting tools to assist in the implementation of mitigation measures to reduce flood damage for people, goods, and ecosystems and to improve the community resilience. Full article
(This article belongs to the Special Issue Numerical Simulations and Modelling of Extreme Flood Events)
12 pages, 2911 KiB  
Communication
Global Wavenumber Spectra of Sea Surface Salinity in the Mesoscale Range Using Satellite Observations
by Daling Li Yi and Peng Wang
Remote Sens. 2024, 16(10), 1753; https://doi.org/10.3390/rs16101753 (registering DOI) - 15 May 2024
Abstract
Sea surface salinity (SSS) variability at mesoscales has become an important research topic in recent decades, thanks to satellite missions enabling observations of SSS with global capacity and mesoscale resolution. Here, we analyze the near-global data of the Aquarius/SAC-D along-track SSS, focusing on [...] Read more.
Sea surface salinity (SSS) variability at mesoscales has become an important research topic in recent decades, thanks to satellite missions enabling observations of SSS with global capacity and mesoscale resolution. Here, we analyze the near-global data of the Aquarius/SAC-D along-track SSS, focusing on the slopes of SSS variance spectra in the mesoscale range from 180 to 430 km. In the vast extratropics, the spectral slope is close to −2, indicating a dynamical regime for the inverse cascade of depth-integrated energy identified by the surface quasi-geostrophic theory. However, the spectral slopes in regions near the mouths of the largest rivers are steeper than −2, reaching −3, possibly due to the large river freshwater flux. In addition, data from high-resolution thermosalinograph are used to validate satellite measurements and show good consistency in terms of SSS variance spectral slopes. Full article
(This article belongs to the Special Issue Advances in Remote Sensing of Ocean Salinity)

Open Access Journals

Browse by Indexing Browse by Subject Selected Journals
Back to TopTop