This article explores the scientific and practical challenges associated with developing simulation modeling methods for remanufacturing within a circular economy framework. It aims to define this concept and identify the key hurdles that need to be overcome for its successful implementation. According to the six principles of sustainable development, the key pillar is remanufacturing. Remanufacturing helps the environment in several different ways, including: saving energy, the conservation of raw materials, the conservation of space, landfills, the reduction of air pollution, and greater fuel efficiency. This process closes the loop in the supply chain, exemplifying the principles of a circular economy. The research methods used are primarily the analysis and criticism of literature, document examination—especially in relation to existing simulation programs and analysis—the logical construction method, and the heuristic method, used to define concept of simulation modelling. In response to scientific and practical challenges, the concept of a new modeling method was defined and presented. This concept uses the legacy of Lean and the author’s original ideas regarding the structuring of the remanufacturing factory and processes. The main contribution of this study is integration, embedding this concept into the simulation software. A comparison with existing solutions and the advantages of the new concept are also included in the article. Full article

Systemic sclerosis (SSc) is a rare autoimmune connective tissue disorder characterized by massive fibrosis, vascular damage, and immune imbalance. Advances in rheumatology and immunology over the past two decades have led to a redefinition of systemic sclerosis, shifting from its initial perception as primarily a “hyperfibrotic” state towards a recognition of systemic sclerosis as an immune-mediated disease. Consequently, the search for genetic markers has transitioned from focusing on fibrotic mechanisms to exploring immune regulatory pathways. Immunogenetics, an emerging field at the intersection of immunology, molecular biology, and genetics has provided valuable insights into inherited factors that influence immunity. Data from genetic studies conducted thus far indicate that alterations in genetic messages can significantly impact disease risk and progression. While certain genetic variations may confer protective effects, others may exacerbate disease susceptibility. This paper presents a comprehensive review of the most relevant genetic changes that influence both the risk and course of systemic sclerosis. Special emphasis is placed on factors regulating the immune response, recognizing their pivotal role in the pathogenesis of the disease. Full article

Zirconium carbide (ZrC) ceramics have a high melting point, low neutron absorption cross section, and excellent resistance to the impact of fission products and are considered to be one of the best candidate materials for fourth-generation nuclear energy systems. ZrC ceramics with a high relative density of 99.1% were successfully prepared via pressureless sintering using a small amount of MoSi₂ as an additive. The influence of the MoSi₂ content on the densification behavior, microstructure, mechanical properties, and thermal properties of ZrC ceramics was systematically investigated. The results show that the densification of ZrC was significantly enhanced by the introduction of MoSi₂ due to the formation of a liquid phase during sintering. In addition, the ZrC grains were refined due to the pinning effect of the generated silicon carbide. The flexural strength and Vickers hardness of ZrC ceramics with 2.5 vol% MoSi₂ sintered at 1850 °C were 408 ± 12 MPa and 17.1 GPa, respectively, which were approximately 30% and 10% higher compared to the samples without the addition of MoSi₂. The improved mechanical properties were mainly attributed to the high relative density (99.1%) and refined microstructure. Full article

4-nitrophenol (4-NP) is a frequently encountered toxic phenolic organic pollutant in water. It is important to develop a simple method to treat 4-NP. Small and monodispersed gold nanoparticles often have good catalytic performance of 4-NP. Hemoglobin (Hb) is a kind of common and important protein in organisms. Herein, highly biocompatible bovine hemoglobin-stabilized gold nanoparticles (Au_n-Hb NPs) were synthesized using hemoglobin as a biological template. Then, the size, zeta potential, and composition of Au_n-Hb NPs were investigated by transmission electron microscopy, dynamic light scattering, and X-ray photoelectron spectroscopy. The Au_n-Hb NPs with small gold nanoparticles of about 1.4–2.4 nm had good catalytic capabilities in reducing 4-NP to form 4-aminophenol. Au₂₀-Hb NPs demonstrated superior catalytic efficiency in the reduction of 4-NP when compared to other nanoparticles. Moreover, as-synthesized Au₂₀-Hb NPs exhibited excellent biocompatibility through the MTT experiment. The method of preparation of gold nanoparticles offers one way to prepare metal nanoparticles for good potential catalytic applications of gold nanoparticles. Full article

This work investigated material extrusion additive manufacturing (MatEx AM) of specialized fluoroelastomer (FKM) compounds for applications in rubber seals and gaskets. The influence of a commercially available perfluoropolyether (PFPE) plasticizer on the printability of a control FKM rubber compound was studied using a custom-designed ram material extruder, Additive Ram Material Extruder (ARME), for printing fully compounded thermoset elastomers. The plasticizer’s effectiveness was assessed based on its ability to address challenges such as high compound viscosity and post-print shrinkage, as well as its impact on interlayer adhesion. The addition of the PFPE plasticizer significantly reduced the FKM compound’s viscosity (by 70%) and post-print shrinkage (by 65%). While the addition of the plasticizer decreased the tensile strength of the control compound, specimens printed with the plasticized FKM retained 34% of the tensile strength of compression-molded samples, compared to only 23% for the unplasticized compound. Finally, the feasibility of seals and gaskets manufacturing using both conventional and unconventional additive manufacturing (AM) approaches was explored. A hybrid method combining AM and soft tooling for compression molding emerged as the optimal method for seal and gasket fabrication. Full article

Elastin-like polypeptides (ELPs) are popular biomaterials due to their reversible, temperature-dependent phase separation and their tunability, which is achievable by evolving procedures in recombinant technology. In particular, reverse direction ligation by plasmid reconstruction (PRe-RDL) is the predominant cloning technique used to generate ELPs of varying lengths. Pre-RDL provides precise control over the number of (VPGXG)_n repeat units in an ELP due to the selection of type IIS restriction enzyme (REs) sites in the reconstructed pET expression plasmid, which is a low-to-medium copy number plasmid. While Pre-RDL can be used to seamlessly repeat essentially any gene sequence and overcome limitations of previous cloning practices, we modified the Pre-RDL technique, where a high copy number plasmid (pBluescript II SK(+)—using a new library of type IIS REs) was used instead of a pET plasmid. The modified technique successfully produced a diblock ELP gene of 240 pentapeptide repeats from 30 pentapeptide “monomers” composed of alanine, tyrosine, and leucine X residues. This study found that the large, GC-rich ELP gene compromised plasmid yields in pBluescript II SK(+) and favored higher plasmid yields in the pET19b expression plasmid. Additionally, the BL21 E. coli strain expression consistently provided a higher transformation efficiency and higher plasmid yield than the high cloning efficiency strain TOP10 E. coli. We hypothesize that the plasmid/high GC gene ratio may play a significant role in these observations, and not the total plasmid size or the total plasmid GC content. While expression of the final gene resulted in a diblock ELP with a phase separation temperature of 34.5 °C, future work will need to investigate RDL techniques in additional plasmids to understand the primary driving factors for improving yields of plasmids with large ELP-encoding genes. Full article

The anomalous Hall effect and spin–orbit torque of TbCo-based multilayer films have been methodically studied in recent years. Many properties of the films can be obtained by the anomalous Hall resistance loops of the samples. We report on the effects of a structure composed of two heavy metals as the buffer layers on the anomalous Hall resistance loops of TbCo-based multilayers at different temperatures. The results showed that the coercivity increases dramatically with decreasing temperature, and the samples without perpendicular magnetic anisotropy at room temperature showed perpendicular magnetic anisotropy at low temperatures. We quantified the spin–orbit torque efficiency and Dzyaloshinskii–Moriya interaction effective field size of the films W/Pt/TbCo/Pt at room temperature by measuring the loop shift of anomalous Hall resistance. The results showed that the study of anomalous Hall resistance loops plays an important role in the study of spintronics, which can not only show the basic properties of the sample, but can also obtain other information about the sample through the shift of the loops. Full article

This paper investigates the failure behavior and vulnerability of the containment structure (CS) under internal pressure according to different functional and structural failure criteria. Through nonlinear numerical analysis, the deformation of the structure, degree of concrete cracking, and the distribution of stresses and strains in the prestressing tendons and steel liner under different failure criteria are compared. Combined with probabilistic analysis methods, the vulnerability curves, HCLPF capacities, and total failure probabilities of CS determined by different failure criteria are systematically discussed. Results show that there are some differences in the failure behavior and pressure capacity of CS under different failure criteria for both functional and structural failure modes. Under the same failure mode, the variability of the pressure capacities obtained using different criteria is relatively small. Generally, the total failure probabilities of CS subjected to overpressure loads determined by different failure criteria exhibit significant differences. If it is considered that all the investigated failure criteria have a certain ability to predict containment failure, the probabilistic assessment results derived from the functional failure criterion based on the fracture strain of steel liners and the structural failure criterion based on the global strain are deemed to be more reasonable. Full article

Nanoparticles (NPs) have shown significant potential for pulmonary administration of therapeutics for the treatment of chronic lung diseases in a localized and sustained manner. Nebulization is a suitable method of NP delivery, particularly in patients whose ability to breathe is impaired due to lung diseases. However, there are limited studies evaluating the physicochemical properties of NPs after they are passed through a nebulizer. High shear stress generated during nebulization could potentially affect the surface properties of NPs, resulting in the loss of encapsulated drugs and alteration in the release kinetics. Herein, we thoroughly examined the physicochemical properties as well as the therapeutic effectiveness of Infasurf lung surfactant (IFS)-coated PLGA NPs previously developed by us after passing through a commercial Aeroneb^® vibrating-mesh nebulizer. Nebulization did not alter the size, surface charge, IFS coating and bi-phasic release pattern exhibited by the NPs. However, there was a temporary reduction in the initial release of encapsulated therapeutics in the nebulized compared to non-nebulized NPs. This underscores the importance of evaluating the drug release kinetics of NPs using the inhalation method of choice to ensure suitability for the intended medical application. The cellular uptake studies demonstrated that both nebulized and non-nebulized NPs were less readily taken up by alveolar macrophages compared to lung cancer cells, confirming the IFS coating retention. Overall, nebulization did not significantly compromise the physicochemical properties as well as therapeutic efficacy of the prepared nanotherapeutics. Full article

Palm kernel cake (PKC), a byproduct of palm oil extraction, serves an important role in Ecuador’s animal feed industry. The emergence of yellow-orange fungal growth in PKC on some cattle farms in Ecuador sparked concerns within the cattle industry regarding a potential mycotoxin-producing fungus on this substrate. Due to the limited availability of analytical chemistry techniques in Ecuador for mycotoxin detection, we chose to isolate and identify the fungus to determine its association with mycotoxin-producing genera. Through molecular identification via ITS region sequencing, we identified the yellow-orange fungus as the yeast Candida ethanolica. Furthermore, we isolated two other fungi—the yeast Pichia kudriavzevii, and the fungus Geotrichum candidum. Molecular identification confirmed that all three species are not classified as mycotoxin-producing fungi but in contrast, the literature indicates that all three have demonstrated antifungal activity against Aspergillus and Penicillium species, genera associated with mycotoxin production. This suggests their potential use in biocontrol to counter the colonization of harmful fungi. We discuss preventive measures against the fungal invasion of PKC and emphasize the importance of promptly identifying fungi on this substrate. Rapid recognition of mycotoxin-producing and pathogenic genera holds the promise of mitigating cattle intoxication and the dissemination of mycotoxins throughout the food chain. Full article

Vesicoureteral reflux (VUR) is defined as the urine backflow from the urinary bladder to the pyelo-caliceal system. In contrast, intrarenal reflux (IRR) is the backflow of urine from the renal calyces into the tubulointerstitial space. VURs, particularly those associated with IRR can result in reflux nephropathy when accompanied by urinary tract infection (UTI). The prevalence of IRR in patients with diagnosed VUR is 1–11% when using voiding cystourethrography (VCUG), while 11.9–61% when applying the contrast-enhanced voiding urosonography (ceVUS). The presence of IRR diagnosed by VCUG often correlates with parenchymal scars, when diagnosed by a 99mTc dimercaptosuccinic acid scan (DMSA scan), mostly in kidneys with high-grade VURs, and when diagnosed by ceVUS, it correlates with the wide spectrum of parenchymal changes on DMSA scan. The study performed by both ceVUS and DMSA scans showed IRRs associated with non-dilated VURs in 21% of all detected VURs. A significant difference regarding the existence of parenchymal damage was disclosed between the IRR-associated and IRR-non-associated VURs. A higher portion of parenchymal changes existed in the IRR-associated VURs, regardless of the VUR grade. That means that kidneys with IRR-associated VURs represent the high-risk group of VURs, which must be considered in the future classification of VURs. When using ceVUS, 62% of places where IRR was found were still unaffected by parenchymal changes. That was the basis for our recommendation of preventive use of long-term antibiotic prophylaxis until the IRR disappearance, regardless of the VUR grade. We propose a new classification of VURs using the ceVUS method, in which each VUR grade is subdivided based on the presence of an IRR. Full article

Artificial intelligence emerges as a powerful catalyst poised to reshape the global sustainability landscape by facilitating the attainment of Sustainable Development Goals (SDGs). This comprehensive Delphi study meticulously probes the insights of domain experts, shedding light on the strategic utilization of AI to advance these critical sustainability objectives. Employing rigorous statistical techniques, encompassing measures of central tendency and interquartile deviation, this research scrutinizes consensus dynamics among experts and elucidates potential variations in their viewpoints. The findings resoundingly convey experts’ collective positive perspective regarding AI’s pivotal role in propelling the SDGs forward. Through two iterative rounds of extensive discussions, a compelling consensus crystallizes—AI indeed exerts an overall positive impact, exemplified by a robust mean score of 78.8%. Intriguingly, distinct SDGs manifest varied propensities toward AI intervention, with Goals 6, 7, 8, 9, 11, 13, 14, and 15 basking in the radiance of highly positive impacts. Goals 1, 2, 3, 4, 5, 10, and 12 exhibit positive impact scores, indicating a juncture ripe for positive advancements. Meanwhile, Goal 16 and Goal 17 languish with neutral scores, signifying a juncture demanding nuanced deliberations about AI’s impact on peace, justice, and strong institutions as well as on partnerships for the goals, respectively. This paper underscores AI as a formidable instrument poised to address humanity’s most pressing challenges while harmonizing seamlessly with the overarching SDG objectives. It gracefully dovetails into established practices across pivotal domains such as health, education, and resilient infrastructures, amplifying the collective global endeavor to navigate the path toward a more sustainable future. Full article

This manuscript details a comprehensive investigation into the synthesis, structural characterization, thermal stability, and optical properties of nickel-containing hybrid perovskites, namely CH₃NH₃NiCl₃, CsNiCl₃, and CH₃NH₃NiBrCl₂. The focal point of this study is to unravel the intricate crystal structures, thermal behaviors, and optical characteristics of these materials, thereby elucidating their potential application in energy conversion and storage technologies. X-ray powder diffraction measurements confirm that CH₃NH₃NiCl₃ adopts a crystal structure within the Cmcm space group, while CsNiCl₃ is organized in the P6₃/mmc space group, as reported previously. Such structural diversity underscores the complex nature of these perovskites and their potential for tailored applications. Thermal analysis further reveals the stability of CH₃NH₃NiCl₃ and CH₃NH₃NiBrCl₂, which begin to decompose at 260 °C and 295 °C, respectively. The optical absorption properties of these perovskites studied by UV-VIS-NIR spectroscopy revealed the bands characteristic of Ni²⁺ ions in an octahedral environment. Notably, these absorption bands exhibit subtle shifts upon bromide substitution, suggesting that optical properties can be finely tuned through halide modification. Such tunability is paramount for the design and development of materials with specific optical requirements. By offering a detailed examination of these properties, the study lays the groundwork for future advancements in material science, particularly in the development of innovative materials for sustainable energy technologies. Full article

Underwater acoustic communication is fraught with challenges, including signal distortion, noise, and interferences unique to aquatic environments. This study aimed to advance the field by developing a novel underwater modem system that utilizes machine learning for signal classification, enhancing the reliability and clarity of underwater transmissions. This research introduced a system architecture incorporating a Lattice Semiconductors FPGA for signal modulation and a half-pipe waveguide to emulate the underwater environment. For signal classification, support vector machines (SVMs) were leveraged with the continuous wavelet transform (CWT) employed for feature extraction from acoustic signals. Comparative analysis with traditional signal processing techniques highlighted the efficacy of the CWT in this context. The experiments and tests carried out with the system demonstrated superior performance in classifying modulated signals under simulated underwater conditions, with the SVM providing a robust classification despite the presence of noise. The use of the CWT for feature extraction significantly enhanced the model’s accuracy, eliminating the need for further dimensionality reduction. Therefore, the integration of machine learning with advanced signal processing techniques presents a promising research line for overcoming the complexities of underwater acoustic communication. The findings underscore the potential of data mining methodologies to improve signal clarity and transmission reliability in aquatic environments. Full article

Small-scale agriculture is important. However, there are still limitations regarding the implementation of technologies in small-scale agriculture due to the high costs accompanying them. Therefore, it is essential to seek viable and low-cost solutions since the insertion of technologies in agriculture, especially irrigated agriculture, guarantees the sustainable expansion of production capacity. The present work applied the Internet of Things concept to an automated irrigation system powered by photovoltaic panels. The materials used in the prototype consisted of Arduino Uno R3, the ESP8266 development board, a soil moisture sensor, a current sensor, a voltage sensor, a flow sensor, and a humidity and temperature sensor. The prototype was designed to take system readings and send them to the Adafruit platform IO. Furthermore, it was programmed to perform remote irrigation control, enabling this to be activated from distant points through the platform. The medium proved efficient for the monitoring and remote control of the system. This indicates that it is possible to use this medium in small automated irrigation systems. Full article

The time–frequency-domain reflection method (TFDR) based on the Wigner–Ville distribution (WVD) is confronted with the problem of cross-term interference in existing methods to locate power cable defects. Therefore, a new method of locating cable defects based on Gaussian narrow-band envelope signals and the S-transform is proposed in this paper. In this method, the wide-band cable transfer function is obtained by adjusting the parameters of the Gaussian narrow-band envelope signal because the Gaussian narrow-band envelope signal has a good frequency-adjusting ability and time–frequency characteristics. Then, the time–frequency of the cable signal is transformed by the generalized S-transform, and the time delay of the modular matrix of the transformation matrix is estimated by the generalized cross-correlation algorithm to complete the accurate detection of the cable defect’s location. Compared with traditional methods, the proposed method can adaptively adjust the analysis time width according to the frequency change and provide intuitive time–frequency characteristics without cross-term interference. Finally, the effectiveness and practicability of the proposed method are verified in MATLAB 2017_a by simulating a 40 m/10 kV medium-voltage power cable and submarine cable with a length of 32 km. Full article

In this paper, a downlink energy efficiency maximization problem is investigated in an intelligent reflective surface (IRS)-assisted visible light communication system. In order to extend wireless communication coverage of the onshore base station, an IRS mounted on a unmanned aerial vehicle (UAV) is introduced to assist an onshore lighthouse with simultaneously providing remote ship users wireless communication services and illumination. Aiming to maximizing the energy efficiency of the proposed system, a resource allocation problem is formulated as the ratio of the achievable system sum rate to the total power consumption under the constraints of the user’s data requirement and transmit power budget. Due to the non-convexity of the proposed problem, the Dinkelbach method and mean-square error (MSE) method are adopted to turn the non-convex origin problem into two equivalent problems, namely transmit beamforming and reflected phase shifting. The Lagrangian method and semidefinite relaxation technique are used to obtain the closed-form solutions of these two subproblems. Accordingly, an alternative optimization-based resource allocation scheme is proposed to obtain the optimal system energy efficiency. The simulation results show that the proposed scheme performs better in terms of energy efficiency over benchmark schemes. Full article

Matrix multiplication plays a crucial role in various engineering and scientific applications. Cannon’s algorithm, executed within two-dimensional systolic arrays, significantly enhances computational efficiency through parallel processing. However, as the matrix size increases, reliability issues become more prominent. Although the previous work has proposed a fault-tolerant mechanism, it is only suitable for scenarios with a limited number of faulty processing elements (PEs). This paper introduces a pair-matching mechanism, assigning a fault-free PE as a proxy for each faulty PE to execute its tasks. Our fault-tolerant mechanism comprises two stages: in the first stage, each fault-free PE completes its designated computations; in the second stage, computations intended for each faulty PE are executed by its assigned fault-free PE proxy. The experimental results demonstrate that compared to the previous work, our approach not only significantly improves the fault tolerance of systolic arrays (applicable to scenarios with a higher number of faulty PEs) but also reduces circuit areas. Therefore, the proposed approach proves effective in practical applications. Full article

Manganese oxide-cerium oxide supported on titanate nanotubes (i.e., MnCe/TiNTs) were prepared and their catalytic activities towards NH₃-SCR of NO were tested. The results indicated that the MnCe/TiNT catalyst can achieve a high NO removal efficiency above 95% within the temperature range of 150–350 °C. Even after exposure to a HCl-containing atmosphere for 2 h, the NO removal efficiency of the MnCe/TiNT catalyst maintains at approximately 90% at 150 °C. This is attributed to the large specific surface area as well as the unique hollow tubular structure of TiNTs that exposes more Ce atoms, which preferentially react with HCl and thus protect the active Mn atoms. Moreover, the abundant OH groups on TiNTs serve as Brønsted acid sites and provide H protons to expel Cl atom from the catalyst surface. The irreversible deactivation caused by HCl can be alleviated by H₂O. That is because the dissociated adsorption of H₂O on TiNTs forms additional OH groups and relieves HCl poisoning. Full article

Managing cellular networks in the Beyond 5G (B5G) era is a complex and challenging task requiring advanced deep learning approaches. Traditional models focusing on internet traffic (INT) analysis often fail to capture the rich temporal and spatial contexts essential for accurate INT predictions. Furthermore, these models do not account for the influence of external factors such as weather, news, and social trends. This study proposes a multi-source CNN-RNN (MSCR) model that leverages a rich dataset, including periodic, weather, news, and social data to address these limitations. This model enables the capture and fusion of diverse data sources for improved INT prediction accuracy. An advanced deep learning model, the transformer-enhanced CNN-RNN (TE-CNN-RNN), has been introduced. This model is specifically designed to predict INT data only. This model demonstrates the effectiveness of transformers in extracting detailed temporal-spatial features, outperforming conventional CNN-RNN models. The experimental results demonstrate that the proposed MSCR and TE-CNN-RNN models outperform existing state-of-the-art models for traffic forecasting. These findings underscore the transformative power of transformers for capturing intricate temporal-spatial features and the importance of multi-source data and deep learning techniques for optimizing cell site management in the B5G era. Full article

We investigated the impact of surface treatments on Si-based electrolyte-gated transistors (EGTs) for detecting urea. Three types of EGTs were fabricated with distinct gate electrodes (Ag, Au, Pt) using a top-down method. These EGTs exhibited exceptional intrinsic electrical properties, including a low subthreshold swing of 80 mV/dec, a high on/off current ratio of 10⁶, and negligible hysteresis. Three surface treatment methods ((3-amino-propyl) triethoxysilane (APTES) and glutaraldehyde (GA), 11-mercaptoundecanoic acid (11-MUA), 3-mercaptopropionic acid (3-MPA)) were individually applied to the EGTs with different gate electrodes (Ag, Au, Pt). Gold nanoparticle binding tests were performed to validate the surface functionalization. We compared their detection performance of urea and found that APTES and GA exhibited the most superior detection characteristics, followed by 11-MUA and 3-MPA, regardless of the gate metal. APTES and GA, with the highest pKa among the three surface treatment methods, did not compromise the activity of urease, making it the most suitable surface treatment method for urea sensing. Full article

Medical and wellness tourism has emerged as a pivotal sector with significant economic implications globally, especially after the COVID-19 pandemic. This study delves into the landscape of Saudi Arabia’s medical and wellness tourism, recognizing its importance as a key player in the tourism industry. The study aims to elevate this sector to new heights on the global stage by employing the Business Model Canvas (BMC) as a strategic tool. BMC allows for a comprehensive analysis of the medical tourism industry in Saudi Arabia, breaking down key elements across its nine blocks: key partners, key activities, key resources, value propositions, customer segments, channels, customer relationships, cost structure, and revenue streams. The results of this study shed light on the unique selling proposition (USP) as a crucial strategic step for Saudi Arabia to distinguish itself and enhance its position in the international medical tourism arena. By identifying and maximizing the unique aspects within each BMC block, the study presents a roadmap for Saudi Arabia, navigating the challenges and capitalizing on the potential of the medical and wellness tourism sector. This research serves as a guide, emphasizing the strategic importance of a well-defined business model to shape the future of medical and wellness tourism in Saudi Arabia and establish a prominent global presence. Full article