The 2023 MDPI Annual Report has
been released!
 
82 pages, 6168 KiB  
Review
Forefront Research of Foaming Strategies on Biodegradable Polymers and Their Composites by Thermal or Melt-Based Processing Technologies: Advances and Perspectives
by Luis F. F. F. Gonçalves, Rui L. Reis and Emanuel M. Fernandes
Polymers 2024, 16(9), 1286; https://doi.org/10.3390/polym16091286 - 03 May 2024
Abstract
The last few decades have witnessed significant advances in the development of polymeric-based foam materials. These materials find several practical applications in our daily lives due to their characteristic properties such as low density, thermal insulation, and porosity, which are important in packaging, [...] Read more.
The last few decades have witnessed significant advances in the development of polymeric-based foam materials. These materials find several practical applications in our daily lives due to their characteristic properties such as low density, thermal insulation, and porosity, which are important in packaging, in building construction, and in biomedical applications, respectively. The first foams with practical applications used polymeric materials of petrochemical origin. However, due to growing environmental concerns, considerable efforts have been made to replace some of these materials with biodegradable polymers. Foam processing has evolved greatly in recent years due to improvements in existing techniques, such as the use of supercritical fluids in extrusion foaming and foam injection moulding, as well as the advent or adaptation of existing techniques to produce foams, as in the case of the combination between additive manufacturing and foam technology. The use of supercritical CO2 is especially advantageous in the production of porous structures for biomedical applications, as CO2 is chemically inert and non-toxic; in addition, it allows for an easy tailoring of the pore structure through processing conditions. Biodegradable polymeric materials, despite their enormous advantages over petroleum-based materials, present some difficulties regarding their potential use in foaming, such as poor melt strength, slow crystallization rate, poor processability, low service temperature, low toughness, and high brittleness, which limits their field of application. Several strategies were developed to improve the melt strength, including the change in monomer composition and the use of chemical modifiers and chain extenders to extend the chain length or create a branched molecular structure, to increase the molecular weight and the viscosity of the polymer. The use of additives or fillers is also commonly used, as fillers can improve crystallization kinetics by acting as crystal-nucleating agents. Alternatively, biodegradable polymers can be blended with other biodegradable polymers to combine certain properties and to counteract certain limitations. This work therefore aims to provide the latest advances regarding the foaming of biodegradable polymers. It covers the main foaming techniques and their advances and reviews the uses of biodegradable polymers in foaming, focusing on the chemical changes of polymers that improve their foaming ability. Finally, the challenges as well as the main opportunities presented reinforce the market potential of the biodegradable polymer foam materials. Full article
(This article belongs to the Special Issue Trendings in Biobased Polymers and Biocomposites)
13 pages, 363 KiB  
Review
Inflammatory Markers in Children and Adolescents with Functional Somatic Disorders: A Systematic Review
by Anne Sofie Hansen, Charlotte Ulrikka Rask and Karen Hansen Kallesøe
Children 2024, 11(5), 549; https://doi.org/10.3390/children11050549 - 03 May 2024
Abstract
Functional somatic disorders (FSDs) are common in children and adolescents. Recent findings suggest that low-grade inflammation has a role in the development and maintenance of pediatric FSDs. This systematic review included studies with original data on systemic inflammatory markers in children and adolescents [...] Read more.
Functional somatic disorders (FSDs) are common in children and adolescents. Recent findings suggest that low-grade inflammation has a role in the development and maintenance of pediatric FSDs. This systematic review included studies with original data on systemic inflammatory markers in children and adolescents with an FSD compared to individuals without an FSD. The literature search identified 1374 articles. After assessment, a total of 15 studies met the inclusion criteria. In total, 41 serum or plasma cytokines were assayed in a population of 696 children and adolescents. Altered cytokine levels in patients with FSDs were reported in 12 studies, whereas three studies found no significant differences when comparing patients with FSDs and controls. The cytokine levels were significantly elevated in nine studies (i.e., IL-2, IL-6, IL-8, IL-12 (p70), CRP, hsCRP, IP-10, MCP-1, sTIM-3, sCD25 and TNF-). The findings indicate that inflammatory response may have a role in the pathophysiology of pediatric FSDs. However, the included studies showed limited quality with potential risk of bias, small study populations and a narrow spectrum of included FSDs, which limits the generalizability of the results. To further explore the potential link between inflammatory markers and pediatric FSDs, future research using a longitudinal study design is recommended. Full article
14 pages, 1184 KiB  
Article
Low Bone Mineral Density on Computed Tomography: Association with Poor Survival after Transcatheter Aortic Valve Replacement
by Caglayan Demirel, Kseniya Halavina, Kevin Hamzaraj, Johanna Klement, Manar El-Shaer, Rayyan Hemetsberger, Max Paul Winter, Sophia Koschatko, Charlotte Jantsch, Martin Andreas, Christian Loewe, Andreas Kammerlander, Christian Hengstenberg and Philipp E. Bartko
J. Clin. Med. 2024, 13(9), 2698; https://doi.org/10.3390/jcm13092698 - 03 May 2024
Abstract
Background: Transcatheter aortic valve replacement (TAVR) has evolved as first-line therapy for severe aortic valve stenosis (AS), with pre-procedural computed tomography (CT) providing critical anatomical information. While primarily used for anatomical planning, TAVR-CT also offers an opportunity to assess low bone mineral density [...] Read more.
Background: Transcatheter aortic valve replacement (TAVR) has evolved as first-line therapy for severe aortic valve stenosis (AS), with pre-procedural computed tomography (CT) providing critical anatomical information. While primarily used for anatomical planning, TAVR-CT also offers an opportunity to assess low bone mineral density (BMD), a known indicator of frailty. Despite this, the prognostic role of BMD in TAVR patients remains unknown. This study aimed to evaluate BMD on routine TAVR-CT and its impact on long-term survival. Methods: In this retrospective study, 770 consecutive TAVR patients (mean age 80.7 ± 6.7 years, 54.0% males) between November 2015 and March 2022 were included. BMD was measured from a single axial image at the thoracic vertebral level on unenhanced CT scans. Cox regression models assessed the impact of BMD on mortality, and Restricted Cubic Spline models identified potential mortality thresholds. Results: The mean BMD value, as measured on non-contrast CT, was 147.5 ± 5.4 Hounsfield units, demonstrating a noteworthy association with mortality (adjusted hazard ratio per 100 HU decrease: 1.27 [95% CI: 1.01–1.59], p = 0.041). Restricted cubic spline analysis indicated that BMD below 200 HU was linked to a substantial increase in mortality risk. Upon crude Cox regression analysis, every 100 HU decrease was associated with a 32% increase in risk for death (HR 1.32 [95%CI: 1.068–1.65)], p = 0.010). Conclusions: In conclusion, low BMD on TAVR-CT is independently associated with reduced survival, suggesting its potential as a tool for comprehensive frailty assessment and improved risk prediction in TAVR patients. Full article
(This article belongs to the Special Issue Valvular Heart Disease: Challenges and New Opportunities)
22 pages, 56171 KiB  
Article
Growing in Scarcity: Pre-Hispanic Rain-Fed Agriculture in the Semi-Arid and Frost-Prone Andean Altiplano (Bolivia)
by Pablo Cruz, Richard Joffre, Thibault Saintenoy and Jean-Joinville Vacher
Land 2024, 13(5), 619; https://doi.org/10.3390/land13050619 - 03 May 2024
Abstract
Ancient Andean agricultural landscapes have been the subject of a large number of archaeological and agro-ecological studies, which generally refer to regions with favourable environmental conditions or, in the case of arid and semi-arid environments, those with irrigation facilities. The aim of this [...] Read more.
Ancient Andean agricultural landscapes have been the subject of a large number of archaeological and agro-ecological studies, which generally refer to regions with favourable environmental conditions or, in the case of arid and semi-arid environments, those with irrigation facilities. The aim of this article is to present and analyse the pre-Hispanic rain-fed farming systems widely represented in two adjacent regions of Bolivia’s arid and cold southern Altiplano. The search for archaeological agricultural areas combined aerial analysis and field surveys. Agro-ecological characterisation was based on historical and ethnographic studies of the region’s present-day populations. Despite their geographical proximity, similar environmental conditions, and same agropastoral way of life, the typology of cultivated areas developed in the southern altiplano differs significantly. Within this same framework of adaptation and resilience, the sectorisation of agricultural systems observed in these two regions reveals a regional productive specialisation that favoured internal exchanges and exchanges with other regions. These differences are related to two models of non-centralised, low-inequality societies—one strongly based on cohesion and the other characterised by greater fragmentation and social conflict—underlining the limits of strict environmental determinism in shaping agricultural landscapes. These results provide new food for thought in the debate on the use and value of rain-fed agricultural practices and more broadly on the diversity of adaptations by human societies in extreme and unstable environmental contexts. Full article
17 pages, 7189 KiB  
Article
Spatial and Temporal Evolution of Precipitation in the Bahr el Ghazal River Basin, Africa
by Jinyu Meng, Zengchuan Dong, Guobin Fu, Shengnan Zhu, Yiqing Shao, Shujun Wu and Zhuozheng Li
Remote Sens. 2024, 16(9), 1638; https://doi.org/10.3390/rs16091638 - 03 May 2024
Abstract
Accurate and punctual precipitation data are fundamental to understanding regional hydrology and are a critical reference point for regional flood control. The aims of this study are to evaluate the performance of three widely used precipitation datasets—CRU TS, ERA5, and NCEP—as potential alternatives [...] Read more.
Accurate and punctual precipitation data are fundamental to understanding regional hydrology and are a critical reference point for regional flood control. The aims of this study are to evaluate the performance of three widely used precipitation datasets—CRU TS, ERA5, and NCEP—as potential alternatives for hydrological applications in the Bahr el Ghazal River Basin in South Sudan, Africa. This includes examining the spatial and temporal evolution of regional precipitation using relatively accurate precipitation datasets. The findings indicate that CRU TS is the best precipitation dataset in the Bahr el Ghazal Basin. The spatial and temporal distributions of precipitation from CRU TS reveal that precipitation in the Bahr el Ghazal Basin has a clear wet season, with June–August accounting for half of the annual precipitation and peaking in July and August. The long-term annual total precipitation exhibits a gradual increasing trend from the north to the south, with the southwestern part of the Basin having the largest percentage of wet season precipitation. Notably, the Bahr el Ghazal Basin witnessed a significant precipitation shift in 1967, followed by an increasing trend. Moreover, the spatial and temporal precipitation evolutions reveal an ongoing risk of flooding in the lower part of the Basin; therefore, increased engineering counter-measures might be needed for effective flood prevention. Full article
Show Figures

Figure 1

27 pages, 9009 KiB  
Article
Temporal Variations in Land Surface Temperature within an Urban Ecosystem: A Comprehensive Assessment of Land Use and Land Cover Change in Kharkiv, Ukraine
by Gareth Rees, Liliia Hebryn-Baidy and Vadym Belenok
Remote Sens. 2024, 16(9), 1637; https://doi.org/10.3390/rs16091637 - 03 May 2024
Abstract
Remote sensing technologies are critical for analyzing the escalating impacts of global climate change and increasing urbanization, providing vital insights into land surface temperature (LST), land use and cover (LULC) changes, and the identification of urban heat island (UHI) and surface urban heat [...] Read more.
Remote sensing technologies are critical for analyzing the escalating impacts of global climate change and increasing urbanization, providing vital insights into land surface temperature (LST), land use and cover (LULC) changes, and the identification of urban heat island (UHI) and surface urban heat island (SUHI) phenomena. This research focuses on the nexus between LULC alterations and variations in LST and air temperature (Tair), with a specific emphasis on the intensified SUHI effect in Kharkiv, Ukraine. Employing an integrated approach, this study analyzes time-series data from Landsat and MODIS satellites, alongside Tair climate records, utilizing machine learning techniques and linear regression analysis. Key findings indicate a statistically significant upward trend in Tair and LST during the summer months from 1984 to 2023, with a notable positive correlation between Tair and LST across both datasets. MODIS data exhibit a stronger correlation (R2 = 0.879) compared to Landsat (R2 = 0.663). The application of a supervised classification through Random Forest algorithms and vegetation indices on LULC data reveals significant alterations: a 70.3% increase in urban land and a decrement in vegetative cover comprising a 15.5% reduction in dense vegetation and a 62.9% decrease in sparse vegetation. Change detection analysis elucidates a 24.6% conversion of sparse vegetation into urban land, underscoring a pronounced trajectory towards urbanization. Temporal and seasonal LST variations across different LULC classes were analyzed using kernel density estimation (KDE) and boxplot analysis. Urban areas and sparse vegetation had the smallest average LST fluctuations, at 2.09 °C and 2.16 °C, respectively, but recorded the most extreme LST values. Water and dense vegetation classes exhibited slightly larger fluctuations of 2.30 °C and 2.24 °C, with the bare land class showing the highest fluctuation 2.46 °C, but fewer extremes. Quantitative analysis with the application of Kolmogorov-Smirnov tests across various LULC classes substantiated the normality of LST distributions p > 0.05 for both monthly and annual datasets. Conversely, the Shapiro-Wilk test validated the normal distribution hypothesis exclusively for monthly data, indicating deviations from normality in the annual data. Thresholded LST classifies urban and bare lands as the warmest classes at 39.51 °C and 38.20 °C, respectively, and classifies water at 35.96 °C, dense vegetation at 35.52 °C, and sparse vegetation 37.71 °C as the coldest, which is a trend that is consistent annually and monthly. The analysis of SUHI effects demonstrates an increasing trend in UHI intensity, with statistical trends indicating a growth in average SUHI values over time. This comprehensive study underscores the critical role of remote sensing in understanding and addressing the impacts of climate change and urbanization on local and global climates, emphasizing the need for sustainable urban planning and green infrastructure to mitigate UHI effects. Full article
Show Figures

Figure 1

22 pages, 14050 KiB  
Article
An Evaluation and Improvement of Microphysical Parameterization for a Heavy Rainfall Process during the Meiyu Season
by Zhimin Zhou, Muyun Du, Yang Hu, Zhaoping Kang, Rong Yu and Yinglian Guo
Remote Sens. 2024, 16(9), 1636; https://doi.org/10.3390/rs16091636 - 03 May 2024
Abstract
The present study assesses the simulated precipitation and cloud properties using three microphysics schemes (Morrison, Thompson and MY) implemented in the Weather Research and Forecasting model. The precipitation, differential reflectivity (ZDR), specific differential phase (KDP) and mass-weighted mean diameter [...] Read more.
The present study assesses the simulated precipitation and cloud properties using three microphysics schemes (Morrison, Thompson and MY) implemented in the Weather Research and Forecasting model. The precipitation, differential reflectivity (ZDR), specific differential phase (KDP) and mass-weighted mean diameter of raindrops (Dm) are compared with measurements from a heavy rainfall event that occurred on 27 June 2020 during the Integrative Monsoon Frontal Rainfall Experiment (IMFRE). The results indicate that all three microphysics schemes generally capture the characteristics of rainfall, ZDR, KDP and Dm, but tend to overestimate their intensity. To enhance the model performance, adjustments are made based on the MY scheme, which exhibited the best performance. Specifically, the overall coalescence and collision parameter (Ec) is reduced, which effectively decreases Dm and makes it more consistent with observations. Generally, reducing Ec leads to an increase in the simulated content (Qr) and number concentration (Nr) of raindrops across most time steps and altitudes. With a smaller Ec, the impact of microphysical processes on Nr and Qr varies with time and altitude. Generally, the autoconversion of droplets to raindrops primarily contributes to Nr, while the accretion of cloud droplets by raindrops plays a more significant role in increasing Qr. In this study, it is emphasized that even if the precipitation characteristics could be adequately reproduced, accurately simulating microphysical characteristics remains challenging and it still needs adjustments in the most physically based parameterizations to achieve more accurate simulation. Full article
Show Figures

Figure 1

18 pages, 4223 KiB  
Review
Application of Waste Tire in Construction: A Road towards Sustainability and Circular Economy
by Mohammad R. Hassan and Denis Rodrigue
Sustainability 2024, 16(9), 3852; https://doi.org/10.3390/su16093852 - 03 May 2024
Abstract
The global demand for rubber is on a steady rise, which is driven by the increasing production of automobiles and the growing need for industrial, medical, and household products. This surge in demand has led to a significant increase in rubber waste, posing [...] Read more.
The global demand for rubber is on a steady rise, which is driven by the increasing production of automobiles and the growing need for industrial, medical, and household products. This surge in demand has led to a significant increase in rubber waste, posing a major global environmental challenge. End-of-life tire (ELT) is a primary source of rubber waste, having significant environmental hazards due to its massive stockpiles. While landfilling is a low-cost and easy-to-implement solution, it is now largely prohibited due to environmental concerns. Recently, ELT rubber waste has received considerable attention for its potential applications in civil engineering and construction. These applications not only enhance sustainability but also foster a circular economy between ELT rubber waste with the civil engineering and construction sectors. This review article presents a general overview of the recent research progress and challenges in the civil engineering applications of ELT rubber waste. It also discusses commercially available recycled rubber-based construction materials, their properties, testing standards, and certification. To the best of the authors’ knowledge, this is the first time such a discussion on commercial products has been presented, especially for civil engineering applications. Full article
(This article belongs to the Special Issue Circular Economy in the Construction Sector)
16 pages, 1411 KiB  
Article
Integrated Approach of Life Cycle Assessment and Experimental Design in the Study of A Model Organic Reaction: New Perspectives in Renewable Vanillin-Derived Chemicals
by Chiara Ruini, Erika Ferrari, Caterina Durante, Giulia Lanciotti, Paolo Neri, Anna Maria Ferrari and Roberto Rosa
Molecules 2024, 29(9), 2132; https://doi.org/10.3390/molecules29092132 - 03 May 2024
Abstract
This work is focused on performing a quantitative assessment of the environmental impacts associated with an organic synthesis reaction, optimized using an experimental design approach. A nucleophilic substitution reaction was selected, employing vanillin as the substrate, a phenolic compound widely used in the [...] Read more.
This work is focused on performing a quantitative assessment of the environmental impacts associated with an organic synthesis reaction, optimized using an experimental design approach. A nucleophilic substitution reaction was selected, employing vanillin as the substrate, a phenolic compound widely used in the food industry and of pharmaceutical interest, considering its antioxidant and antitumoral potential. To carry out the reaction, three different solvents have been chosen, namely acetonitrile (ACN), acetone (Ace), and dimethylformamide (DMF). The syntheses were planned with the aid of a multivariate experimental design to estimate the best reaction conditions, which simultaneously allow a high product yield and a reduced environmental impact as computed by Life Cycle Assessment (LCA) methodology. The experimental results highlighted that the reactions carried out in DMF resulted in higher yields with respect to ACN and Ace; these reactions were also the ones with lower environmental impacts. The multilinear regression models allowed us to identify the optimal experimental conditions able to guarantee the highest reaction yields and lowest environmental impacts for the studied reaction. The identified optimal experimental conditions were also validated by experimentally conducting the reaction in those conditions, which indeed led to the highest yield (i.e., 93%) and the lowest environmental impacts among the performed experiments. This work proposes, for the first time, an integrated approach of DoE and LCA applied to an organic reaction with the aim of considering both conventional metrics, such as reaction yield, and unconventional ones, such as environmental impacts, during its lab-scale optimization. Full article
23 pages, 4087 KiB  
Article
A Combined Experimental/Computational Study of Dicationic Ionic Liquids with Bromide and Tungstate Anions
by Guelber Cardoso Gomes, Claudio Ferdeghini, Luca Guglielmero, Felicia D’Andrea, Lorenzo Guazzelli, Andrea Mezzetta and Christian Silvio Pomelli
Molecules 2024, 29(9), 2131; https://doi.org/10.3390/molecules29092131 - 03 May 2024
Abstract
A panel of dicationic ionic liquids (DILs) with different rigid xylyl (ortho, meta, para) spacers and different anions (bromide and tungstate) has been synthetised and characterised through different experimental and computational techniques. Differences and analogies between the systems are analysed using information derived [...] Read more.
A panel of dicationic ionic liquids (DILs) with different rigid xylyl (ortho, meta, para) spacers and different anions (bromide and tungstate) has been synthetised and characterised through different experimental and computational techniques. Differences and analogies between the systems are analysed using information derived from their DFT structures, semiempirical dynamics, thermal behaviour, and catalytic properties versus the well-known reaction of CO2 added to epichlorohydrin. A comparison between the proposed systems and some analogues that present non-rigid spacers shows the key effect displayed by structure rigidity on their characteristics. The results show an interesting correlation between structure, flexibility, properties, and catalytic activity. Full article
15 pages, 1301 KiB  
Review
The Role of Galectins in Asthma Pathophysiology: A Comprehensive Review
by Andrea Portacci, Ilaria Iorillo, Leonardo Maselli, Monica Amendolara, Vitaliano Nicola Quaranta, Silvano Dragonieri and Giovanna Elisiana Carpagnano
Curr. Issues Mol. Biol. 2024, 46(5), 4271-4285; https://doi.org/10.3390/cimb46050260 - 03 May 2024
Abstract
Galectins are a group of β-galactoside-binding proteins with several roles in immune response, cellular adhesion, and inflammation development. Current evidence suggest that these proteins could play a crucial role in many respiratory diseases such as pulmonary fibrosis, lung cancer, and respiratory infections. From [...] Read more.
Galectins are a group of β-galactoside-binding proteins with several roles in immune response, cellular adhesion, and inflammation development. Current evidence suggest that these proteins could play a crucial role in many respiratory diseases such as pulmonary fibrosis, lung cancer, and respiratory infections. From this standpoint, an increasing body of evidence have recognized galectins as potential biomarkers involved in several aspects of asthma pathophysiology. Among them, galectin-3 (Gal-3), galectin-9 (Gal-9), and galectin-10 (Gal-10) are the most extensively studied in human and animal asthma models. These galectins can affect T helper 2 (Th2) and non-Th2 inflammation, mucus production, airway responsiveness, and bronchial remodeling. Nevertheless, while higher Gal-3 and Gal-9 concentrations are associated with a stronger degree of Th-2 phlogosis, Gal-10, which forms Charcot–Leyden Crystals (CLCs), correlates with sputum eosinophilic count, interleukin-5 (IL-5) production, and immunoglobulin E (IgE) secretion. Finally, several galectins have shown potential in clinical response monitoring after inhaled corticosteroids (ICS) and biologic therapies, confirming their potential role as reliable biomarkers in patients with asthma. Full article
(This article belongs to the Section Molecular Medicine)
19 pages, 9357 KiB  
Article
Quantification of Fundamental Textile Properties of Electronic Textiles Fabricated Using Different Techniques
by Arash M. Shahidi, Kalana Marasinghe, Parvin Ebrahimi, Jane Wood, Zahra Rahemtulla, Philippa Jobling, Carlos Oliveira, Tilak Dias and Theo Hughes-Riley
Textiles 2024, 4(2), 218-236; https://doi.org/10.3390/textiles4020013 - 03 May 2024
Abstract
Electronic textiles (E-textiles) have experienced an increase in interest in recent years leading to a variety of new concepts emerging in the field. Despite these technical innovations, there is limited literature relating to the testing of E-textiles for some of the fundamental properties [...] Read more.
Electronic textiles (E-textiles) have experienced an increase in interest in recent years leading to a variety of new concepts emerging in the field. Despite these technical innovations, there is limited literature relating to the testing of E-textiles for some of the fundamental properties linked to wearer comfort. As such, this research investigates four fundamental properties of E-textiles: air permeability, drape, heat transfer, and moisture transfer. Three different types of E-textiles were explored: an embroidered electrode, a knitted electrode, and a knitted structure with an embedded electronic yarn. All of the E-textiles utilized the same base knitted fabric structure to facilitate a comparative study. The study used established textile testing practices to evaluate the E-textiles to ascertain the suitability of these standards for these materials. The study provides a useful point of reference to those working in the field and highlights some limitations of existing textile testing methodologies when applied to E-textiles. Full article
(This article belongs to the Special Issue Advances in Smart Textiles)
Show Figures

Graphical abstract

11 pages, 4167 KiB  
Article
Hydrogen Formation from Water with Various Reducing Metals Catalyzed by In Situ-Generated Nickel Nanoparticles
by Ron Shirman and Yoel Sasson
Hydrogen 2024, 5(2), 230-240; https://doi.org/10.3390/hydrogen5020014 - 03 May 2024
Abstract
Water is a potential green source for the generation of clean elemental hydrogen without contaminants. One of the most convenient methods for hydrogen generation is based on the oxidation of different metals by water. The inspection of the catalytic activity toward hydrogen formation [...] Read more.
Water is a potential green source for the generation of clean elemental hydrogen without contaminants. One of the most convenient methods for hydrogen generation is based on the oxidation of different metals by water. The inspection of the catalytic activity toward hydrogen formation from water performed in this study was carried out using four different metals, namely, zinc, magnesium, iron, and manganese. The process is catalyzed by in situ-generated nickel nanoparticles. The zinc–water system was found to be the most effective and exhibited 94% conversion in 4 h. The solid phase in the latter system was characterized by PXRD and SEM techniques. Several blank tests provided a fundamental understanding of the role of each constituent within the system, and a molecular mechanism for the catalytic cycle was proposed. Full article
Show Figures

Graphical abstract

17 pages, 1576 KiB  
Review
The Preventive Role of Glutamine Supplementation in Cardiac Surgery-Associated Kidney Injury from Experimental Research to Clinical Practice: A Narrative Review
by Anca Drăgan and Adrian Ştefan Drăgan
Medicina 2024, 60(5), 761; https://doi.org/10.3390/medicina60050761 - 03 May 2024
Abstract
Acute kidney injury represents a significant threat in cardiac surgery regarding complications and costs. Novel preventive approaches are needed, as the therapeutic modalities are still limited. As experimental studies have demonstrated, glutamine, a conditionally essential amino acid, might have a protective role in [...] Read more.
Acute kidney injury represents a significant threat in cardiac surgery regarding complications and costs. Novel preventive approaches are needed, as the therapeutic modalities are still limited. As experimental studies have demonstrated, glutamine, a conditionally essential amino acid, might have a protective role in this setting. Moreover, the levels of glutamine after the cardiopulmonary bypass are significantly lower. In clinical practice, various trials have investigated the effects of glutamine supplementation on cardiac surgery with encouraging results. However, these studies are heterogeneous regarding the selection criteria, timing, dose, outcomes studied, and way of glutamine administration. This narrative review aims to present the potential role of glutamine in cardiac surgery-associated acute kidney injury prevention, starting from the experimental studies and guidelines to the clinical practice and future directions. Full article
(This article belongs to the Collection Interdisciplinary Medicine – The Key For Personalized Medicine)
Show Figures

Figure 1

15 pages, 11625 KiB  
Article
Non-Linear Dynamics of Simple Elastic Systems Undergoing Friction-Ruled Stick–Slip Motions
by Riccardo Barsotti, Stefano Bennati and Giovanni Migliaccio
CivilEng 2024, 5(2), 420-434; https://doi.org/10.3390/civileng5020021 - 03 May 2024
Abstract
The stick–slip phenomenon is a jerking motion that can occur while two objects slide over each other with friction. There are several situations in which this phenomenon can be observed: between the slabs of the friction dampers used to mitigate vibrations in buildings, [...] Read more.
The stick–slip phenomenon is a jerking motion that can occur while two objects slide over each other with friction. There are several situations in which this phenomenon can be observed: between the slabs of the friction dampers used to mitigate vibrations in buildings, as well as between the components of the base isolation systems used for seismic protection. The systems of this kind are usually designed to work in a smooth and flawless manner, but under particular conditions undesired jerking motions may develop, yielding complex dynamic behavior even when only a few degrees of freedom are involved. A simplified approach to the problems of this kind leads to the mechanical model of a rigid block connected elastically to a rigid support and at the same time with friction to a second rigid support, both the supports having a prescribed motion. Despite the apparent simplicity of this model, it is very useful for studying important features of the non-linear dynamics of many physical systems. In this work, after a suitable formulation of the problem, the equations of motion are solved analytically in the sticking and sliding phases, and the influence of the main parameters of the system on its dynamics and limit cycles is investigated and discussed. Full article
(This article belongs to the Special Issue "Stability of Structures", in Memory of Prof. Marcello Pignataro)
Show Figures

Figure 1

27 pages, 15086 KiB  
Article
Vision-Guided Tracking and Emergency Landing for UAVs on Moving Targets
by Yisak Debele, Ha-Young Shi, Assefinew Wondosen, Henok Warku, Tae-Wan Ku and Beom-Soo Kang
Drones 2024, 8(5), 182; https://doi.org/10.3390/drones8050182 - 03 May 2024
Abstract
This paper presents a vision-based adaptive tracking and landing method for multirotor Unmanned Aerial Vehicles (UAVs), designed for safe recovery amid propulsion system failures that reduce maneuverability and responsiveness. The method addresses challenges posed by external disturbances such as wind and agile target [...] Read more.
This paper presents a vision-based adaptive tracking and landing method for multirotor Unmanned Aerial Vehicles (UAVs), designed for safe recovery amid propulsion system failures that reduce maneuverability and responsiveness. The method addresses challenges posed by external disturbances such as wind and agile target movements, specifically, by considering maneuverability and control limitations caused by propulsion system failures. Building on our previous research in actuator fault detection and tolerance, our approach employs a modified adaptive pure pursuit guidance technique with an extra adaptation parameter to account for reduced maneuverability, thus ensuring safe tracking of moving objects. Additionally, we present an adaptive landing strategy that adapts to tracking deviations and minimizes off-target landings caused by lateral tracking errors and delayed responses, using a lateral offset-dependent vertical velocity control. Our system employs vision-based tag detection to ascertain the position of the Unmanned Ground Vehicle (UGV) in relation to the UAV. We implemented this system in a mid-mission emergency landing scenario, which includes actuator health monitoring of emergency landings. Extensive testing and simulations demonstrate the effectiveness of our approach, significantly advancing the development of safe tracking and emergency landing methods for UAVs with compromised control authority due to actuator failures. Full article
Show Figures

Figure 1

13 pages, 2028 KiB  
Article
Ionic Conductivity Analysis of NASICON Solid Electrolyte Coated with Polyvinyl-Based Polymers
by Tiago Afonso Salgueiro, Rita Carvalho Veloso, João Ventura, Federico Danzi and Joana Oliveira
Batteries 2024, 10(5), 157; https://doi.org/10.3390/batteries10050157 - 03 May 2024
Abstract
The global environmental crisis necessitates reliable, sustainable, and safe energy storage solutions. The current systems are nearing their capacity limits due to the reliance on conventional liquid electrolytes, which are fraught with stability and safety concerns, prompting the exploration of solid-state electrolytes, which [...] Read more.
The global environmental crisis necessitates reliable, sustainable, and safe energy storage solutions. The current systems are nearing their capacity limits due to the reliance on conventional liquid electrolytes, which are fraught with stability and safety concerns, prompting the exploration of solid-state electrolytes, which enable the integration of metal electrodes. Solid-state sodium-ion batteries emerge as an appealing option by leveraging the abundance, low cost, and sustainability of sodium. However, low ionic conductivity and high interfacial resistance currently prevent their widespread adoption. This study explores polyvinyl-based polymers as wetting agents for the NASICON-type NZSP (Na3Zr2Si2PO12) solid electrolyte, resulting in a combined system with enhanced ionic conductivity suitable for Na-ion solid-state full cells. Electrochemical impedance spectroscopy (EIS) performed on symmetric cells employing NZSP paired with different wetting agent compositions demonstrates a significant reduction in interfacial resistance with the use of poly(vinyl acetate)—(PVAc-) based polymers, achieving an impressive ionic conductivity of 1.31 mS cm−1 at room temperature, 63.8% higher than the pristine material, notably reaching 7.36 mS cm−1 at 90 °C. These results offer valuable insights into the potential of PVAc-based polymers for advancing high-performance solid-state sodium-ion batteries by reducing their total internal resistance. Full article
(This article belongs to the Collection Advances in Battery Materials)
Show Figures

Figure 1

14 pages, 815 KiB  
Article
Developing the Physical Performance in Youth Soccer: Short-Term Effect of Dynamic–Ecological Versus Traditional Training Approach for Sub-Elite U13 Players—An Ecological Exploratory Cluster Randomised Trial
by Italo Sannicandro, Samuel Agostino, Massimiliano Abate Daga, Franco Veglio and Federico Abate Daga
J. Funct. Morphol. Kinesiol. 2024, 9(2), 83; https://doi.org/10.3390/jfmk9020083 - 03 May 2024
Abstract
Currently, research in youth soccer consists of methodological choices that can raise activity volumes and exercise intensity to promote proper training for youth soccer demands. Therefore, the present cluster randomised trial aims to evaluate the effects of the dynamic–ecological approach on the physical [...] Read more.
Currently, research in youth soccer consists of methodological choices that can raise activity volumes and exercise intensity to promote proper training for youth soccer demands. Therefore, the present cluster randomised trial aims to evaluate the effects of the dynamic–ecological approach on the physical performance parameters compared with a traditional one in a group of sub-elite U13 players. Thirty-five male children (age 12.16 ± 0.55 years; weight 45.59 ± 7.15 kg; height 145.5 ± 4.2 cm; BMI 15.8 ± 2.1 kg·m−2) were recruited for this trial from two teams belonging to sub-elite soccer schools and randomly assigned to a dynamic–ecological approach (DEA) or a traditional training (TTG) group. The training program lasted six weeks and consisted of 18 training sessions of 90 min each (3 sessions per week). The sample was evaluated by the standing long jump (SLJ), hop test (HT), 10 m sprint (10 m), 10 × 5 m shuttle run test (SRT), and leg raise test (LR). The DEA group showed significantly higher results in the SLJ (p < 0.001), HT left leg (p < 0.001), 10 m sprint (p < 0.001), and SRT (p < 0.001). In conclusion, the dynamic–ecological approach provides higher performance adaptations. Therefore, this approach can be considered a suitable method to optimise pre-pubertal player training, mainly when no fitness or strength coach is available. Full article
(This article belongs to the Section Athletic Training and Human Performance)
14 pages, 1596 KiB  
Article
An Analysis of the Main Nutrient Components of the Fruits of Different Macadamia (Macadamia integrifolia) Cultivars in Rocky Desertification Areas and a Comprehensive Evaluation of the Mineral Element Contents
by Zhuanmiao Kang, Guangzheng Guo, Fengping He, Hui Zeng, Xinghao Tu and Wenlin Wang
Horticulturae 2024, 10(5), 468; https://doi.org/10.3390/horticulturae10050468 - 03 May 2024
Abstract
This study aims to understand the main nutrient composition and comprehensively evaluate the differences in the mineral element contents of fruits of different macadamia cultivars, as well as screen good cultivars that are suitable for use in rocky desert mountains. Nine macadamia nut [...] Read more.
This study aims to understand the main nutrient composition and comprehensively evaluate the differences in the mineral element contents of fruits of different macadamia cultivars, as well as screen good cultivars that are suitable for use in rocky desert mountains. Nine macadamia nut cultivars were selected as test materials in rocky desert mountain orchards. The contents of crude fat, crude protein, and total soluble sugar in kernels and N, P, K, Ca, Mg, Fe, Mn, Cu, Zn, and B in peels and kernels were determined, respectively. Then, the kernels’ mineral element contents were comprehensively evaluated based on principal component analysis. The results showed that the kernels were rich in crude fat, protein, and soluble sugar, with the crude fat content reaching 75% or greater, and the variation among cultivars was small. However, the variation in soluble sugar content was extensive. The content of mineral elements varied in different cultivars and parts of the fruit, with the average macronutrient content being K > N > Ca > P > Mg in the pericarp and N > K > P > Mg > Ca in the kernel, and the content of micronutrients in the pericarp and the kernel being Mn > Fe > Zn > Cu > B. By principal component analysis, the 10 mineral nutrient indexes were calculated as four principal components, with a cumulative contribution rate of 88.051%. Using the affiliation function value method and the calculation of the comprehensive evaluation value, the nine cultivars could be classified into three categories. The cultivar with the highest comprehensive evaluation value of the mineral element content was O.C. The one with the lowest value was H2, which indicated that O.C is a suitable variety for popularization in rocky desert mountainous areas. Stepwise regression analysis concluded that P, K, Fe, Mn, and Cu were the indicators significantly influencing the mineral element content of macadamia nuts and fruits in rocky desert mountains. Full article
(This article belongs to the Special Issue Fertilizer Usage and Nutrient Management in Horticultural Crops)
Show Figures

Figure 1

18 pages, 5269 KiB  
Article
Combining Transcriptome- and Metabolome-Analyzed Differentially Expressed Genes and Differential Metabolites in Development Period of Caoyuanheimo-1 (Agaricus sp.) from Inner Mongolia, China
by Hai-yan Wang, Ya-nan Lu, Ya-jiao Li, Guo-qin Sun, Yuan Wu, Rui-qing Ji and Wei Yan
Horticulturae 2024, 10(5), 469; https://doi.org/10.3390/horticulturae10050469 - 03 May 2024
Abstract
Caoyuanheimo-1 (Agaricus sp.) is a delectable mushroom native to Inner Mongolia, China, belonging to the Agaricus genus and valued for both its edible and medicinal properties. Although it has been cultivated to a certain extent, the molecular mechanisms regulating its development remain [...] Read more.
Caoyuanheimo-1 (Agaricus sp.) is a delectable mushroom native to Inner Mongolia, China, belonging to the Agaricus genus and valued for both its edible and medicinal properties. Although it has been cultivated to a certain extent, the molecular mechanisms regulating its development remain poorly understood. Building on our understanding of its growth and development conditions at various stages, we conducted transcriptomic and metabolomic studies to identify the differentially expressed genes (DEGs) and metabolites throughout its growth cycle. Simultaneously, we analyzed the synthesis pathways and identified several key genes involved in the production of terpenoids, which are secondary metabolites with medicinal value widely found in mushrooms. A total of 6843 unigenes were annotated, and 449 metabolites were detected in our study. Many of these metabolites and differentially expressed genes (DEGs) are involved in the synthesis and metabolism of amino acids, such as arginine, cysteine, methionine, and other amino acids, which indicates that the genes related to amino acid metabolism may play an important role in the fruiting body development of Caoyuanheimo-1. Succinic acid also showed a significant positive correlation with the transcriptional level changes of nine genes, including laccase-1 (TRINITY_DN5510_c0_g1), fruiting body protein SC3 (TRINITY_DN3577_c0_g1), and zinc-binding dihydrogenase (TRINITY_DN2099_c0_g1), etc. Additionally, seventeen terpenoids and terpenoid-related substances were identified, comprising five terpenoid glycosides, three monoterpenoids, two diterpenoids, one sesquiterpenoid, one sesterterpenoid, two terpenoid lactones, and three triterpenoids. The expression levels of the genes related to terpenoid synthesis varied across the three developmental stages. Full article
15 pages, 28321 KiB  
Article
Study of Orifice Design on Oleo-Pneumatic Shock Absorber
by Paulo A. S. F. Silva, Ahmed A. Sheikh Al-Shabab, Panagiotis Tsoutsanis and Martin Skote
Fluids 2024, 9(5), 108; https://doi.org/10.3390/fluids9050108 - 03 May 2024
Abstract
Aircraft oil-strut shock absorbers rely on orifice designs to control fluid flow and optimize damping performance. However, the complex nature of cavitating flows poses significant challenges in predicting the influence of orifice geometry on energy dissipation and system reliability. This study presents a [...] Read more.
Aircraft oil-strut shock absorbers rely on orifice designs to control fluid flow and optimize damping performance. However, the complex nature of cavitating flows poses significant challenges in predicting the influence of orifice geometry on energy dissipation and system reliability. This study presents a comprehensive computational fluid dynamics (CFD) analysis of the effects of circular, rectangular, semicircular, and cutback orifice profiles on the internal flow characteristics and damping behavior of oleo-pneumatic shock absorbers. High-fidelity simulations reveal that the rectangular orifice generates higher damping pressures and velocity magnitude than those generated by others designs, while the semicircular shape reduces cavitation inception and exhibits a more gradual pressure recovery. Furthermore, the study highlights the importance of considering both geometric and thermodynamic factors in the design and analysis of cavitating flow systems, as liquid properties and vapor pressure significantly impact bubble growth and collapse behavior. Increasing the orifice length had a negligible impact on damping but moderately raised orifice velocities. This research provides valuable insights for optimizing shock absorber performance across a range of operating conditions, ultimately enhancing vehicle safety and passenger comfort. Full article
(This article belongs to the Special Issue Turbulent Flow, 2nd Edition)
13 pages, 2526 KiB  
Article
Toe Box Shape of Running Shoes Affects In-Shoe Foot Displacement and Deformation: A Randomized Crossover Study
by Chengyuan Zhu, Yang Song, Yufan Xu, Aojie Zhu, Julien S. Baker, Wei Liu and Yaodong Gu
Bioengineering 2024, 11(5), 457; https://doi.org/10.3390/bioengineering11050457 - 03 May 2024
Abstract
Background: Long-distance running is popular but associated with a high risk of injuries, particularly toe-related injuries. Limited research has focused on preventive measures, prompting exploration into the efficacy of raised toe box running shoes. Purpose: This study aimed to investigate the effect of [...] Read more.
Background: Long-distance running is popular but associated with a high risk of injuries, particularly toe-related injuries. Limited research has focused on preventive measures, prompting exploration into the efficacy of raised toe box running shoes. Purpose: This study aimed to investigate the effect of running shoes with raised toe boxes on preventing toe injuries caused by distance running. Methods: A randomized crossover design involved 25 male marathon runners (height: 1.70 ± 0.02 m, weight: 62.6 + 4.5 kg) wearing both raised toe box (extended by 8 mm along the vertical axis and 3 mm along the sagittal axis) and regular toe box running shoes. Ground reaction force (GRF), in-shoe displacement, and degree of toe deformation (based on the distance change between the toe and the metatarsal head) were collected. Results: Wearing raised toe box shoes resulted in a significant reduction in vertical (p = 0.001) and antero–posterior (p = 0.015) ground reaction forces during the loading phase, with a notable increase in vertical ground reaction force during the toe-off phase (p < 0.001). In-shoe displacement showed significant decreased movement in the forefoot medial (p < 0.001) and rearfoot (medial: p < 0.001, lateral: p < 0.001) and significant increased displacement in the midfoot (medial: p = 0.002, lateral: p < 0.001). Impact severity on the hallux significantly decreased (p < 0.001), while impact on the small toes showed no significant reduction (p = 0.067). Conclusions: Raised toe box running shoes offer an effective means of reducing toe injuries caused by long-distance running. Full article
(This article belongs to the Special Issue Multiscale Modeling in Computational Biomechanics)
15 pages, 2439 KiB  
Article
Assessment of Anti-Prostate Cancer Activity among Four Seaweeds, with Focus on Caulerpa lentillifera J.Agardh
by Guan-James Wu and Pei-Wen Hsiao
Foods 2024, 13(9), 1411; https://doi.org/10.3390/foods13091411 - 03 May 2024
Abstract
In response to a global shift towards health-conscious and environmentally sustainable food choices, seaweed has emerged as a focus for researchers due to its large-scale cultivation potential and the development of bioactive substances. This research explores the potential anticancer properties of seaweed extracts, [...] Read more.
In response to a global shift towards health-conscious and environmentally sustainable food choices, seaweed has emerged as a focus for researchers due to its large-scale cultivation potential and the development of bioactive substances. This research explores the potential anticancer properties of seaweed extracts, focusing on analyzing the impact of four common edible seaweeds in Taiwan on prostate cancer (PCa) cells’ activity. The study used bioassay-guided fractionation to extract Cl80 from various seaweeds with androgen receptor (AR)-inhibitory activity. Cl80 demonstrated effective suppression of 5α-dihydrotestosterone (DHT)-induced AR activity in 103E cells and attenuated the growth and prostate-specific antigen (PSA) protein expression in LNCaP and 22Rv1 cells. Additionally, Cl80 exhibited differential effects on various PCa cell lines. Concentrations above 5 μg/mL significantly inhibited LNCaP cell proliferation, while 22Rv1 cells were more resistant to Cl80. PC-3 cell proliferation was inhibited at 5 μg/mL but not completely at 50 μg/mL. A clonogenic assay showed that at a concentration of 0.5 μg/mL, the colony formation in LNCaP and PC-3 cells was significantly reduced, with a dose-dependent effect. Cl80 induced apoptosis in all PCa cell types, especially in LNCaP cells, with increased apoptotic cells observed at higher concentrations. Cl80 also decreased the mitochondrial membrane potential (ΔΨm) in a dose-dependent manner in all PCa cell lines. Furthermore, Cl80 suppressed the migration ability of PCa cells, with significant reductions observed in LNCaP, 22Rv1, and PC-3 cells at various concentrations. These compelling findings highlight the promising therapeutic potential of C. lentillifera J.Agardh and its isolated compound Cl80 in the treatment of PCa. Full article
Show Figures

Graphical abstract

Open Access Journals

Browse by Indexing Browse by Subject Selected Journals
Back to TopTop