The 2023 MDPI Annual Report has
been released!
 
Article
Spatio-Temporal Variation in the Exceedance of Enterococci in Lake Burley Griffin: An Analysis of 16 Years’ Recreational Water Quality Monitoring Data
by Ripon Kumar Adhikary, Danswell Starrs, David Wright, Barry Croke, Kathryn Glass and Aparna Lal
Int. J. Environ. Res. Public Health 2024, 21(5), 579; https://doi.org/10.3390/ijerph21050579 (registering DOI) - 01 May 2024
Abstract
Recreational waterbodies with high levels of faecal indicator bacteria (FIB) pose health risks and are an ongoing challenge for urban-lake managers. Lake Burley Griffin (LBG) in the Australian Capital city of Canberra is a popular site for water-based recreation, but analyses of seasonal [...] Read more.
Recreational waterbodies with high levels of faecal indicator bacteria (FIB) pose health risks and are an ongoing challenge for urban-lake managers. Lake Burley Griffin (LBG) in the Australian Capital city of Canberra is a popular site for water-based recreation, but analyses of seasonal and long-term patterns in enterococci that exceed alert levels (>200 CFU per 100 mL, leading to site closures) are lacking. This study analysed enterococci concentrations from seven recreational sites from 2001–2021 to examine spatial and temporal patterns in exceedances during the swimming season (October–April), when exposure is highest. The enterococci concentrations varied significantly across sites and in the summer months. The frequency of the exceedances was higher in the 2009–2015 period than in the 2001–2005 and 2015–2021 periods. The odds of alert-level concentrations were greater in November, December, and February compared to October. The odds of exceedance were higher at the Weston Park East site (swimming beach) and lower at the Ferry Terminal and Weston Park West site compared to the East Basin site. This preliminary examination highlights the need for site-specific assessments of environmental and management-related factors that may impact the public health risks of using the lake, such as inflows, turbidity, and climatic conditions. The insights from this study confirm the need for targeted monitoring efforts during high-risk months and at specific sites. The study also advocates for implementing measures to minimise faecal pollution at its sources. Full article
16 pages, 1075 KiB  
Article
A Binary-State Continuous-Time Markov Chain Model for Offshoring and Reshoring
by Chiara Brambilla, Luca Grosset and Elena Sartori
Axioms 2024, 13(5), 300; https://doi.org/10.3390/axioms13050300 (registering DOI) - 01 May 2024
Abstract
We present a two-country model (North and South) that describes the phenomenon of offshoring and reshoring. The model is a continuous time-controlled Markov chain with binary states. The main trade-off involves production costs and transaction costs between one country and another. In the [...] Read more.
We present a two-country model (North and South) that describes the phenomenon of offshoring and reshoring. The model is a continuous time-controlled Markov chain with binary states. The main trade-off involves production costs and transaction costs between one country and another. In the first part of this paper, we identify the key parameters of the model: the difference in unit production costs between the two countries considered, the marginal cost of transitioning between countries, and the incentive paid by the North country to all companies that have not relocated at the end of the planning interval. The final goal of our paper is to understand how national tax incentives can influence this process. Full article
(This article belongs to the Special Issue Advances in Mathematics: Theory and Applications)
22 pages, 10765 KiB  
Article
Waste Biomass-Mediated Synthesis of TiO2/P, K-Containing Grapefruit Peel Biochar Composites with Enhanced Photocatalytic Activity
by Ruixiang Wu, Wenhua Liu, Renao Bai, Delun Zheng, Xiufang Tian, Weikai Lin, Qianwei Ke and Lejian Li
Molecules 2024, 29(9), 2090; https://doi.org/10.3390/molecules29092090 (registering DOI) - 01 May 2024
Abstract
In this study, TiO2/P, K-containing grapefruit peel biochar (TiO2/P, K-PC) composites were synthesized in situ biomimetically using grapefruit peel as the bio-template and carbon source and tetrabutyl titanate as the titanium source. This was achieved using the two-step rotary [...] Read more.
In this study, TiO2/P, K-containing grapefruit peel biochar (TiO2/P, K-PC) composites were synthesized in situ biomimetically using grapefruit peel as the bio-template and carbon source and tetrabutyl titanate as the titanium source. This was achieved using the two-step rotary impregnation–calcination method. Adjusting the calcination temperature of the sample in an air atmosphere could regulate the mass ratio of TiO2 to carbon. The prepared samples were subjected to an analysis of their compositions, structures, morphologies, and properties. It demonstrated that the prepared samples were complexes of anatase TiO2 and P, K-containing carbon, with the presence of graphitic carbon. They possessed a unique morphological structure with abundant pores and a large surface area. The grapefruit peel powder played a crucial role in the induction and assembly of TiO2/P, K-PC composites. The sample PCT-400-550 had the best photocatalytic activity, with the degradation rate of RhB, MO, and MB dye solutions reaching more than 99% within 30 min, with satisfactory cyclic stability. The outstanding photocatalytic activity can be credited to its unique morphology and the efficient collaboration between TiO2 and P, K-containing biochar. Full article
(This article belongs to the Section Materials Chemistry)
Show Figures

Figure 1

15 pages, 2031 KiB  
Article
Unraveling a Historical Mystery: Identification of a Lichen Dye Source in a Fifteenth Century Medieval Tapestry
by Rachel M. Lackner, Solenn Ferron, Joël Boustie, Françoise Le Devehat, H. Thorsten Lumbsch and Nobuko Shibayama
Heritage 2024, 7(5), 2370-2384; https://doi.org/10.3390/heritage7050112 (registering DOI) - 01 May 2024
Abstract
As part of a long-term campaign to document, study, and conserve the Heroes tapestries from The Cloisters collection at The Metropolitan Museum of Art, organic colorant analysis of Julius Caesar (accession number 47.101.3) was performed. Analysis with liquid chromatography–quadrupole time-of-flight mass spectrometry (LC-qToF-MS) [...] Read more.
As part of a long-term campaign to document, study, and conserve the Heroes tapestries from The Cloisters collection at The Metropolitan Museum of Art, organic colorant analysis of Julius Caesar (accession number 47.101.3) was performed. Analysis with liquid chromatography–quadrupole time-of-flight mass spectrometry (LC-qToF-MS) revealed the presence of several multiply chlorinated xanthones produced only by certain species of lichen. Various lichen dye sources have been documented in the literature for centuries and are classified as either ammonia fermentation method (AFM) or boiling water method (BWM) dyes based on their method of production. However, none of these known sources produce the distinctive metabolites present in the tapestry. LC-qToF-MS was also used to compare the chemical composition of the dyes in the tapestry with that of several species of crustose lichen. Lichen metabolites, including thiophanic acid and arthothelin, were definitively identified in the tapestry based on comparison with lichen xanthone standards and a reference of Lecanora sulphurata, confirming the presence of a lichen source. This finding marks the first time that lichen xanthones have been identified in a historic object and the first evidence that BWM lichen dyes may have been used prior to the eighteenth century. Full article
(This article belongs to the Special Issue Dyes in History and Archaeology 42)
Show Figures

Figure 1

27 pages, 1339 KiB  
Article
Comprehensive Six-Degrees-of-Freedom Trajectory Design and Optimization of a Launch Vehicle with a Hybrid Last Stage Using the PSO Algorithm
by Ukte Aksen, Alim Rustem Aslan and Umit Deniz Goker
Appl. Sci. 2024, 14(9), 3891; https://doi.org/10.3390/app14093891 (registering DOI) - 01 May 2024
Abstract
Increased performance with reduced overall cost, and precise design and optimization of launch systems are critical to affordability. In this respect, the use of hybrid motors has increased to ease handling based on motor selection. In the current study, the launch vehicle’s performance [...] Read more.
Increased performance with reduced overall cost, and precise design and optimization of launch systems are critical to affordability. In this respect, the use of hybrid motors has increased to ease handling based on motor selection. In the current study, the launch vehicle’s performance is enhanced by incorporating a hybrid rocket motor into the last stage and optimized using particle swarm optimization to develop a six-degrees-of-freedom tool. This modification aims to increase payload placement flexibility, facilitate handling, and reduce costs. Thanks to the interactive subsystems within this research, this innovative study more comprehensively considers the launch vehicle trajectory design problem, allowing the simultaneous consideration of the effect of launch vehicle geometry along with other parameters in the system. In this context, the proposed method is applied to the Minotaur-I launch vehicle, and contributions of the detailed design and optimization are presented. Optimization results show that the percentage differences between these models for the original vehicle were observed to be 11.55% in velocity and 8.02% in altitude. However, there were differences of 10.06% and 48.8%, 15.8% and 23.2%, and 19.5% and 78.9% in altitudes and velocities when the center of gravity and moment of inertia changes were neglected, and constant aerodynamic coefficients were assumed, respectively. In all these cases, it was observed that the flight path angle was not close to zero. Moreover, the same mission was achieved by the launch vehicle with the optimized hybrid last stage and the propulsion performance was increased by about 7.64% based on the specific impulse and total impulse-over-weight ratio. Full article
(This article belongs to the Section Aerospace Science and Engineering)
16 pages, 4769 KiB  
Article
OCT Intensity of the Region between Outer Retina Band 2 and Band 3 as a Biomarker for Retinal Degeneration and Therapy
by Yong Zeng, Shasha Gao, Yichao Li, Dario Marangoni, Tharindu De Silva, Wai T. Wong, Emily Y. Chew, Xun Sun, Tiansen Li, Paul A. Sieving and Haohua Qian
Bioengineering 2024, 11(5), 449; https://doi.org/10.3390/bioengineering11050449 (registering DOI) - 01 May 2024
Abstract
Optical coherence tomography (OCT) is widely used to probe retinal structure and function. This study investigated the outer retina band (ORB) pattern and reflective intensity for the region between bands 2 and 3 (Dip) in three mouse models of inherited retinal degeneration (Rs1KO, [...] Read more.
Optical coherence tomography (OCT) is widely used to probe retinal structure and function. This study investigated the outer retina band (ORB) pattern and reflective intensity for the region between bands 2 and 3 (Dip) in three mouse models of inherited retinal degeneration (Rs1KO, TTLL5KO, RPE65KO) and in human AMD patients from the A2A database. OCT images were manually graded, and reflectivity signals were used to calculate the Dip ratio. Qualitative analyses demonstrated the progressive merging band 2 and band 3 in all three mouse models, leading to a reduction in the Dip ratio compared to wildtype (WT) controls. Gene replacement therapy in Rs1KO mice reverted the ORB pattern to one resembling WT and increased the Dip ratio. The degree of anatomical rescue in these mice was highly correlated with level of transgenic RS1 expression and with the restoration of ERG b-wave amplitudes. While the inner retinal cavity was significantly enlarged in dark-adapted Rs1KO mice, the Dip ratio was not altered. A reduction of the Dip ratio was also detected in AMD patients compared with healthy controls and was also positively correlated with AMD severity on the AMD score. We propose that the ORB and Dip ratio can be used as non-invasive early biomarkers for retina health, which can be used to probe therapeutic gene expression and to evaluate the effectiveness of therapy. Full article
(This article belongs to the Special Issue Biomedical Imaging and Analysis of the Eye: Second Edition)
Show Figures

Figure 1

17 pages, 2456 KiB  
Article
Design and Implementation of Robust H∞ Control for Improving Disturbance Rejection of Grid-Connected Three-Phase PWM Rectifiers
by Naima Ait Ramdane, Adel Rahoui, Boussad Boukais, Mohamed Fouad Benkhoris, Mourad Ait-Ahmed and Ali Djerioui
Energies 2024, 17(9), 2166; https://doi.org/10.3390/en17092166 (registering DOI) - 01 May 2024
Abstract
In response to the high performance requirements of pulse width modulation (PWM) converters in grid-connected power systems, H-Infinity (H∞) control has attracted significant research interest due to its robustness against parameter variations and external disturbances. In this work, an advanced robust [...] Read more.
In response to the high performance requirements of pulse width modulation (PWM) converters in grid-connected power systems, H-Infinity (H∞) control has attracted significant research interest due to its robustness against parameter variations and external disturbances. In this work, an advanced robust H∞ control is proposed for a grid-connected three-phase PWM rectifier. A two-level control strategy is adopted, where cascaded H∞ controllers are designed to simultaneously regulate the DC bus voltage and input currents even under load disturbances and non-ideal grid conditions. As a result, unit power factor, stable DC bus voltage, and sinusoidal input currents with lower harmonics can be accurately achieved. The design methodology and stability of the proposed controller are verified through a comprehensive analysis. Simulation tests and experimental implementation on a dSPACE 1103 board demonstrate that the proposed control scheme can effectively enhance disturbance rejection performance under various operating conditions. Full article
(This article belongs to the Section F3: Power Electronics)
18 pages, 1090 KiB  
Article
Edge Caching Data Distribution Strategy with Minimum Energy Consumption
by Zhi Lin and Jiarong Liang
Sensors 2024, 24(9), 2898; https://doi.org/10.3390/s24092898 (registering DOI) - 01 May 2024
Abstract
In the context of the rapid development of the Internet of Vehicles, virtual reality, automatic driving and the industrial Internet, the terminal devices in the network show explosive growth. As a result, more and more information is generated from the edge of the [...] Read more.
In the context of the rapid development of the Internet of Vehicles, virtual reality, automatic driving and the industrial Internet, the terminal devices in the network show explosive growth. As a result, more and more information is generated from the edge of the network, which makes the data throughput increase dramatically in the mobile communication network. As the key technology of the fifth-generation mobile communication network, mobile edge caching technology which caches popular data to the edge server deployed at the edge of the network avoids the data transmission delay of the backhaul link and the occurrence of network congestion. With the growing scale of the network, distributing hot data from cloud servers to edge servers will generate huge energy consumption. To realize the green and sustainable development of the communication industry and reduce the energy consumption of distribution of data that needs to be cached in edge servers, we make the first attempt to propose and solve the problem of edge caching data distribution with minimum energy consumption (ECDDMEC) in this paper. First, we model and formulate the problem as a constrained optimization problem and then prove its NP-hardness. Subsequently, we design a greedy algorithm with computational complexity of O(n2) to solve the problem approximately. Experimental results show that compared with the distribution strategy of each edge server directly requesting data from the cloud server, the strategy obtained by the algorithm can significantly reduce the energy consumption of data distribution. Full article
(This article belongs to the Section Internet of Things)
15 pages, 1253 KiB  
Article
Mental Health and Traumatic Occupational Exposure in Wildland Fire Dispatchers
by Robin Verble, Rachel Granberg, Seth Pearson, Charlene Rogers and Roman Watson
Fire 2024, 7(5), 157; https://doi.org/10.3390/fire7050157 - 01 May 2024
Abstract
Wildland fire dispatchers play a key role in wildland fire management and response organization; however, to date, wildland fire studies have largely focused on the physical hazards and, to a lesser extent, mental health hazards of wildland firefighting operational personnel, and dispatcher studies [...] Read more.
Wildland fire dispatchers play a key role in wildland fire management and response organization; however, to date, wildland fire studies have largely focused on the physical hazards and, to a lesser extent, mental health hazards of wildland firefighting operational personnel, and dispatcher studies have primarily focused on 911 and police dispatchers. Studies of other dispatchers have provided some limited insight into potential strains impacting this workforce, including work-related fatigue, burnout, and traumatic exposure. However, the specific job hazards that are faced by wildland fire dispatchers are poorly understood. In 2023, we conducted a cross-sectional survey of 510 wildland fire dispatchers with questions about their occupational health, general health, and well-being. We used validated screening instruments to measure the rates of anxiety, depression, PTSD, and suicidal thoughts and ideation. Here, we also present the results of mental health and trauma exposure questions that were asked as part of a larger survey. We found that demographic factors were significant indicators of anxiety, depression, and binge/restrictive eating. Our data indicate that rates of anxiety, depression, PTSD, and suicidal thoughts and ideation are significantly higher for both the wildland fire dispatching workforce and other emergency responder populations than those of the general United States population. Full article
(This article belongs to the Section Fire Social Science)
14 pages, 1803 KiB  
Essay
Can Citizens Do Science? Science in Common and Social Responsibility
by Ainara Aberasturi Rodríguez, Ignacio Fierro Bandera and Jose Navarro-Pedreño
Sci 2024, 6(2), 26; https://doi.org/10.3390/sci6020026 - 01 May 2024
Abstract
Citizen science is an effective tool that unites ordinary citizens and scientists for a common cause. In particular, this tool enables ordinary citizens to participate in research and increases the likelihood of generating new knowledge. It is seen as the democratization of science. [...] Read more.
Citizen science is an effective tool that unites ordinary citizens and scientists for a common cause. In particular, this tool enables ordinary citizens to participate in research and increases the likelihood of generating new knowledge. It is seen as the democratization of science. It is mainly applied in developed countries, and citizens usually help obtain environmental data with emerging technologies. However, training citizens to obtain good-quality data is one of the most significant challenges. It is also important to involve citizens in other phases, such as data analysis, discussion, and knowledge generation. Citizen science can be a tool for integrating different groups in science to promote social inclusion, including environmental, agricultural, earth, and life sciences. Thus, citizen science can contribute to education, sustainability, and climate change mitigation. Full article
(This article belongs to the Special Issue Feature Papers—Multidisciplinary Sciences 2023)
Show Figures

Figure 1

13 pages, 1260 KiB  
Article
Evaluation of an App-Supported Intensive Interdisciplinary Treatment for Young People with Chronic Pain: A Mixed-Methods Study
by Dunja Genent, Sabrina Schenk, Almut Hartenstein-Pinter, Boris Zernikow and Julia Wager
Sci 2024, 6(2), 25; https://doi.org/10.3390/sci6020025 - 01 May 2024
Abstract
Chronic pain in the vulnerable phase of emerging adulthood is associated with severe life impairments. The current healthcare system has no suitable treatments for young people. A new multimodal inpatient and app-supported treatment for young people with chronic pain counteracts this. The study [...] Read more.
Chronic pain in the vulnerable phase of emerging adulthood is associated with severe life impairments. The current healthcare system has no suitable treatments for young people. A new multimodal inpatient and app-supported treatment for young people with chronic pain counteracts this. The study examines the effectiveness of this new treatment. Our mixed-methods design combined qualitative and quantitative evaluations. The sample comprised N = 44 patients (18–25 years) who took part in the new treatment. The quantitative data showed a reduced degree of pain severity, pain-related and emotional impairments, and an improved quality of life. The qualitative data showed that several components of the new treatment were particularly important to the young adults: individuality and taking the patient seriously, group therapy with peers, individual therapies (psychological, medical), life counselling, and sports. Results support the individual and objective success of a new inpatient pain treatment applied during emerging adulthood. Full article
Show Figures

Figure 1

11 pages, 15756 KiB  
Article
Advanced Integration of Microwave Kiln Technology in Enhancing the Lost-Wax Glass Casting Process: A Study on Methodological Innovations and Practical Implications
by Shu-Chen Cheng, Ming-Shan Kao and Jiunn-Jer Hwang
J. Compos. Sci. 2024, 8(5), 168; https://doi.org/10.3390/jcs8050168 - 01 May 2024
Abstract
Lost-wax glass casting, an esteemed yet technically demanding art form, traditionally relies on specialized, costly kiln equipment, presenting significant barriers to artists regarding equipment affordability, energy efficiency, and the technical mastery required for temperature control. Therefore, this study introduces an innovative approach by [...] Read more.
Lost-wax glass casting, an esteemed yet technically demanding art form, traditionally relies on specialized, costly kiln equipment, presenting significant barriers to artists regarding equipment affordability, energy efficiency, and the technical mastery required for temperature control. Therefore, this study introduces an innovative approach by integrating a microwave kiln with standard household microwave ovens, thus facilitating the lost-wax glass casting process. This methodological adaptation allows artists to employ readily available home appliances for glass creation, significantly reducing the process’s cost and complexity. Our experimental investigations reveal that, by using a 500W household microwave oven for heating, the silicon carbide (SiC) in microwave kilns can efficiently absorb microwave energy, allowing the kilns to reach temperatures exceeding 700 °C, a critical threshold for casting glass softening. We further demonstrate that by adjusting the number of heating cycles, producing high-quality, three-dimensional(3D) glass artworks is feasible, even for large-scale projects. In addition, the microwave kiln can be used as an effective cooling tool to uniformly cool the formed casting glass. This study presents a possible alternative to conventional kiln technology and marks a paradigm shift in glassmaking, offering a more accessible and sustainable avenue for artists and practitioners. Full article
(This article belongs to the Special Issue Functional Composites: Fabrication and Application)
Show Figures

Figure 1

12 pages, 1106 KiB  
Article
Community-Based Intervention for Active Detection and Provision of Single-Dose Rifampicin Post-Exposure Prophylaxis to Household Contacts of Leprosy in Bolivia
by Abundio Baptista Mora, Nimer Ortuño-Gutiérrez, Deisy Zurita Paniagua, Carlos Hurtado Solares, Anil Fastenau and Christa Kasang
Trop. Med. Infect. Dis. 2024, 9(5), 101; https://doi.org/10.3390/tropicalmed9050101 - 01 May 2024
Abstract
Background: To achieve zero leprosy cases in Santa Cruz, Bolivia, we designed a community-based active detection and provision of single-dose rifampicin post-exposure prophylaxis (SDR-PEP) to household contacts with new leprosy patients. Methods: From July to August 2021, we assessed the current knowledge, attitude, [...] Read more.
Background: To achieve zero leprosy cases in Santa Cruz, Bolivia, we designed a community-based active detection and provision of single-dose rifampicin post-exposure prophylaxis (SDR-PEP) to household contacts with new leprosy patients. Methods: From July to August 2021, we assessed the current knowledge, attitude, and practices through structured interviews and focus group discussions with community representatives and health staff. This was followed by sensitization sessions, the training of health staff, and the reinforcement of referral mechanisms. Teams, including health staff and community volunteers, visited all new leprosy patients detected in 2021–2023 and household contacts. Results: Among 115 community representatives, knowledge about leprosy etiology was attributed to non-biological factors (74%); fear accounted for 77%, and access to care was perceived as weak (74%), but the outlook was improved by SDR-PEP (80%). Among the 217 health staff interviewed, the programmatic barriers identified were a lack of referral feedback (67%), limited supplies for diagnosis and prevention, and ineffective training (64%). We visited 70 new patients and 258 household contacts. The median age in household contacts was 25 years old; 49% were women, 98% were eligible for SDR-PEP, and all who were eligible accepted it. Those who were non-eligible included one tuberculosis patient and six newly detected leprosy patients (23‰). Conclusions: A community-based intervention was successful in Santa Cruz, Bolivia. Misbeliefs and a lack of knowledge were identified as barriers. Programmatic components should be reinforced for SDR-PEP extension. Full article
(This article belongs to the Special Issue Community Engagement and Neglected Tropical Diseases (NTDs))
Show Figures

Figure 1

10 pages, 1764 KiB  
Article
Impact of the Stool-Based Xpert Test on Childhood Tuberculosis Diagnosis in Selected States in Nigeria
by Nkiru Nwokoye, Bethrand Odume, Peter Nwadike, Ikechukwu Anaedobe, Zirra Mangoro, Michael Umoren, Chidubem Ogbudebe, Ogoamaka Chukwuogo, Sani Useni, Debby Nongo, Rupert Eneogu, Emeka Elom, Petra De Haas and Mustapha Gidado
Trop. Med. Infect. Dis. 2024, 9(5), 100; https://doi.org/10.3390/tropicalmed9050100 - 01 May 2024
Abstract
Background: In Nigeria, most children with tuberculosis (TB) present at primary health clinics where there are limited personnel skilled in collecting appropriate respiratory specimens from those who cannot produce sputum. KNCV Nigeria, in collaboration with the National Tuberculosis Control Program, implemented a modified [...] Read more.
Background: In Nigeria, most children with tuberculosis (TB) present at primary health clinics where there are limited personnel skilled in collecting appropriate respiratory specimens from those who cannot produce sputum. KNCV Nigeria, in collaboration with the National Tuberculosis Control Program, implemented a modified simple, one-step (SOS), stool-based Xpert MTB/RIF method for diagnosis of TB in children who cannot expectorate sputum. We evaluated the impact of its implementation on childhood TB diagnosis. Method: A cross-sectional study was conducted across 14 selected states using secondary data of children presumed to have TB. Stool was collected from children presumed to have TB and processed using Xpert. Result: Out of 52,117 presumptive TB cases, 52% were male and 59.7% were under 5 years old. A total of 2440 (5%) cases were diagnosed with TB, and 2307 (95%) were placed on treatment. Annual TB notifications increased significantly after the introduction of the stool-based Xpert test when compared to those in the pre-implementation period. Increasing contributions from stool testing were observed throughout the implementation period, except in 2020 during the COVID-19 era. Overall, stool Xpert testing improved childhood TB notification in the studied states. Interventions aimed at awareness creation, capacity building, and active case finding improved the performance of the test. Full article
(This article belongs to the Section Infectious Diseases)
Show Figures

Figure 1

8 pages, 193 KiB  
Article
Hidden from Family History: The Ethics of Remembering
by Martin Robb
Genealogy 2024, 8(2), 51; https://doi.org/10.3390/genealogy8020051 - 01 May 2024
Abstract
This article draws on case studies or ‘microhistories’ from the author’s own research to explore the ethical responsibility of family historians to represent the experiences of those whose lives have been ‘hidden from history’, and in particular the lives of one’s female ancestors, [...] Read more.
This article draws on case studies or ‘microhistories’ from the author’s own research to explore the ethical responsibility of family historians to represent the experiences of those whose lives have been ‘hidden from history’, and in particular the lives of one’s female ancestors, as a way of correcting the omissions and erasures of official histories. It also discusses the ethical dilemmas posed by the discovery that one’s ancestors were involved in activities that are now regarded as morally suspect, such as profiting from the ownership of slaves. Finally, the article debates ethical arguments about respecting the rights of the dead to privacy. Full article
(This article belongs to the Special Issue Ethics and Family History: Challenges, Dilemmas and Responsibilities)
22 pages, 3119 KiB  
Article
Dysregulation of a Subset of Circulating and Vesicle-Associated miRNA in Pancreatic Cancer
by Giulia Girolimetti, Iulia Andreea Pelisenco, Leonardo Henry Eusebi, Claudio Ricci, Beatrice Cavina, Ivana Kurelac, Tiziano Verri, Matteo Calcagnile, Pietro Alifano, Alessandro Salvi, Cecilia Bucci and Flora Guerra
Non-Coding RNA 2024, 10(3), 29; https://doi.org/10.3390/ncrna10030029 - 01 May 2024
Abstract
Pancreatic ductal adenocarcinoma (PDAC) is one of the most aggressive neoplasia, characterized by early metastasis, low diagnostic rates at early stages, resistance to drugs, and poor prognosis. There is an urgent need to better characterize this disease in order to identify efficient diagnostic/prognostic [...] Read more.
Pancreatic ductal adenocarcinoma (PDAC) is one of the most aggressive neoplasia, characterized by early metastasis, low diagnostic rates at early stages, resistance to drugs, and poor prognosis. There is an urgent need to better characterize this disease in order to identify efficient diagnostic/prognostic biomarkers. Since microRNAs (miRNAs) contribute to oncogenesis and metastasis formation in PDAC, they are considered potential candidates for fulfilling this task. In this work, the levels of two miRNA subsets (involved in chemoresistance or with oncogenic/tumor suppressing functions) were investigated in a panel of PDAC cell lines and liquid biopsies of a small cohort of patients. We used RT-qPCR and droplet digital PCR (ddPCR) to measure the amounts of cellular- and vesicle-associated, and circulating miRNAs. We found that both PDAC cell lines, also after gemcitabine treatment, and patients showed low amounts of cellular-and vesicle-associated miR-155-5p, compared to controls. Interestingly, we did not find any differences when we analyzed circulating miR-155-5p. Furthermore, vesicle-related miR-27a-3p increased in cancer patients compared to the controls, while circulating let-7a-5p, miR-221-3p, miR-23b-3p and miR-193a-3p presented as dysregulated in patients compared to healthy individuals. Our results highlight the potential clinical significance of these analyzed miRNAs as non-invasive diagnostic molecular tools to characterize PDAC. Full article
(This article belongs to the Special Issue Extracellular Vesicles and ncRNA)
Show Figures

Figure 1

18 pages, 22447 KiB  
Article
Rheological and Injectability Evaluation of Sterilized Poloxamer-407-Based Hydrogels Containing Docetaxel-Loaded Lipid Nanoparticles
by Ana Camila Marques, Paulo C. Costa, Sérgia Velho and Maria Helena Amaral
Gels 2024, 10(5), 307; https://doi.org/10.3390/gels10050307 - 01 May 2024
Abstract
Nanostructured lipid carriers (NLCs) have the potential to increase the bioavailability and reduce the side effects of docetaxel (DTX). However, only a small fraction of nanoparticles given intravenously can reach a solid tumor. In situ-forming gels combined with nanoparticles facilitate local administration and [...] Read more.
Nanostructured lipid carriers (NLCs) have the potential to increase the bioavailability and reduce the side effects of docetaxel (DTX). However, only a small fraction of nanoparticles given intravenously can reach a solid tumor. In situ-forming gels combined with nanoparticles facilitate local administration and promote drug retention at the tumor site. Injectable hydrogels based on poloxamer 407 are excellent candidates for this hybrid nanoparticle–hydrogel system because of their thermoresponsive behavior and biocompatibility. Therefore, this work aimed to develop injectable poloxamer hydrogels containing NLCs for intratumoral delivery of DTX. To ensure sterility, the obtained hydrogels were autoclaved (121 °C for 15 min) after preparation. Then, the incorporation of NLCs into the poloxamer hydrogels and the impact of steam sterilization on the nanocomposite hydrogels were evaluated concerning sol–gel transition, injectability, and physicochemical stability. All formulations were extruded through the tested syringe–needle systems with acceptable force (2.2–13.4 N) and work (49.5–317.7 N·mm) of injection. Following steam sterilization, injection became easier in most cases, and the physicochemical properties of all hydrogels remained practically unchanged according to the spectroscopical and thermal analysis. The rheological evaluation revealed that the nanocomposite hydrogels were liquid at 25 °C and underwent rapid gelation at 37 °C. However, their sterilized counterparts gelled at 1–2 °C above body temperature, suggesting that the autoclaving conditions employed had rendered these nanocomposite hydrogels unsuitable for local drug delivery. Full article
(This article belongs to the Special Issue Advances in Functional Gel (2nd Edition))
Show Figures

Figure 1

21 pages, 4422 KiB  
Article
Size Control of Carbon Xerogel Spheres as Key Factor Governing the H2O2 Selectivity in Metal-Free Bifunctional Electro-Fenton Catalysts for Tetracycline Degradation
by Edgar Fajardo-Puerto, Nerea López-García, Abdelhakim Elmouwahidi, Esther Bailón-García, Francisco Carrasco-Marín, Lilian D. Ramírez-Valencia and Agustín F. Pérez-Cadenas
Gels 2024, 10(5), 306; https://doi.org/10.3390/gels10050306 - 01 May 2024
Abstract
Carbon xerogel spheres co-doped with nitrogen and eco-graphene were synthesized using a typical solvothermal method. The results indicate that the incorporation of eco-graphene enhances the electrochemical properties, such as the current density (JK) and the selectivity for the four transferred electrons [...] Read more.
Carbon xerogel spheres co-doped with nitrogen and eco-graphene were synthesized using a typical solvothermal method. The results indicate that the incorporation of eco-graphene enhances the electrochemical properties, such as the current density (JK) and the selectivity for the four transferred electrons (n). Additionally, nitrogen doping has a significant effect on the degradation efficiency, varying with the size of the carbon xerogel spheres, which could be attributed to the type of nitrogenous group doped in the carbon material. The degradation efficiency improved in the nanometric spheres (48.3% to 61.6%) but decreased in the micrometric-scale spheres (58.6% to 53.4%). This effect was attributed to the N-functional groups present in each sample, with N-CNS-5 exhibiting a higher percentage of graphitic nitrogen (35.7%) compared to N-CMS-5 (15.3%). These findings highlight the critical role of sphere size in determining the type of N-functional groups present in the sample. leading to enhanced degradation of pollutants as a result of the electro-Fenton process. Full article
(This article belongs to the Special Issue Synthesis, Properties and Applications of Carbon Aerogel)
Show Figures

Figure 1

25 pages, 3245 KiB  
Review
Application of Strain Selection Technology in Alcoholic Beverages: A Review
by Xiaodie Chen, Chuan Song, Jian Zhao, Zhuang Xiong, Lianxin Peng, Liang Zou, Caihong Shen and Qiang Li
Foods 2024, 13(9), 1396; https://doi.org/10.3390/foods13091396 - 01 May 2024
Abstract
The diversity of alcohol beverage microorganisms is of great significance for improving the brewing process and the quality of alcohol beverage products. During the process of making alcoholic beverages, a group of microorganisms, represented by yeast and lactic acid bacteria, conducts fermentation. These [...] Read more.
The diversity of alcohol beverage microorganisms is of great significance for improving the brewing process and the quality of alcohol beverage products. During the process of making alcoholic beverages, a group of microorganisms, represented by yeast and lactic acid bacteria, conducts fermentation. These microorganisms have complex synergistic or competitive relationships, and the participation of different microorganisms has a major impact on the fermentation process and the flavor and aroma of the product. Strain selection is one of the key steps. Utilizing scientific breeding technology, the relationship between strains can be managed, the composition of the alcoholic beverage microbial community can be improved, and the quality and flavor of the alcoholic beverage products can be increased. Currently, research on the microbial diversity of alcohol beverages has received extensive attention. However, the selection technology for dominant bacteria in alcohol beverages has not yet been systematically summarized. To breed better-quality alcohol beverage strains and improve the quality and characteristics of wine, this paper introduces the microbial diversity characteristics of the world’s three major brewing alcohols: beer, wine, and yellow wine, as well as the breeding technologies of related strains. The application of culture selection technology in the study of microbial diversity of brewed wine was reviewed and analyzed. The strain selection technology and alcohol beverage process should be combined to explore the potential application of a diverse array of alcohol beverage strains, thereby boosting the quality and flavor of the alcohol beverage and driving the sustainable development of the alcoholic beverage industry. Full article
Show Figures

Figure 1

12 pages, 4260 KiB  
Article
Impact of Esterification with Octenyl Succinic Anhydride on the Structural Characteristics and Glucose Response in Mice of Wheat Starch
by Hyun Sung Lee, Gyeong A Jeong, Seokwon Lim and Chang Joo Lee
Foods 2024, 13(9), 1395; https://doi.org/10.3390/foods13091395 - 01 May 2024
Abstract
In this study, we investigated the structural properties and digestibility of wheat starch treated with octenyl succinic anhydride (OSA). For the experiment, the samples were reacted with 2, 4, 6, 8, and 10% OSA (pH 8.5–9.0) for 2 h. A light micrograph showed [...] Read more.
In this study, we investigated the structural properties and digestibility of wheat starch treated with octenyl succinic anhydride (OSA). For the experiment, the samples were reacted with 2, 4, 6, 8, and 10% OSA (pH 8.5–9.0) for 2 h. A light micrograph showed that there was no difference in the morphology and Maltese cross between native and OSA-treated starch. The X-ray diffraction (XRD) patterns of the native and OSA-treated starches showed typical A-type diffraction. In addition, the Fourier transform infrared (FT-IR) spectrum showed a distinct carbonyl peak at approximately 1730 cm−1, indicating the stretching vibration of the C=O bond of the ester group. The degree of substitution (DS) and content of resistant starch (RS) increased with increasing concentrations of treated OSA because of the increase in ester bonds. In particular, RS was thermostable compared to the RS content in uncooked and cooked starch. Blood glucose levels and response in vivo decreased as the OSA concentration increased. Treatment of wheat starch with 8% OSA concentration produced 35.6% heat-stable resistant starch. These results suggest that starch modified with OSA can be used to produce functional foods for diabetes. Full article
Show Figures

Figure 1

3 pages, 140 KiB  
Editorial
A Special Issue on “Food Perception and Preferences in the Context of Health and Sustainability”
by Marlies Wallner and Monica Laureati
Foods 2024, 13(9), 1394; https://doi.org/10.3390/foods13091394 - 01 May 2024
Abstract
In a rapidly changing world with increasing environmental and health issues, it is necessary to steer research in an appropriate direction while keeping our health in mind [...] Full article
3 pages, 160 KiB  
Editorial
Advances in Food Waste Biomass Transformation into High-Value Products
by Umile Gianfranco Spizzirri and Donatella Restuccia
Foods 2024, 13(9), 1393; https://doi.org/10.3390/foods13091393 - 01 May 2024
Abstract
In recent years, there has been a concerning surge in waste generation, with agri-food waste emerging as a significant issue across various stages of the food supply chain [...] Full article
17 pages, 2815 KiB  
Article
Magnetic Three-Dimensional Graphene: A Superior Adsorbent for Selective and Sensitive Determination of Nitrite in Water Samples by Ion-Pair Based-Surfactant-Assisted Solid-Phase Extraction Combined with Spectrophotometry
by Mina Vasheghani Farahani, Sajad Karami, Hassan Sereshti, Shokouh Mahpishanian, Somayeh Koupaei Malek and Shahabaldin Rezania
ChemEngineering 2024, 8(3), 47; https://doi.org/10.3390/chemengineering8030047 - 01 May 2024
Abstract
A straightforward, fast and efficient analytical method was developed which utilizes a magnetic composite called three-dimensional graphene (3D-G@Fe3O4) as an adsorbent to recover nitrite ions (NO2) from environmental water samples. The investigation into the synthesized adsorbent [...] Read more.
A straightforward, fast and efficient analytical method was developed which utilizes a magnetic composite called three-dimensional graphene (3D-G@Fe3O4) as an adsorbent to recover nitrite ions (NO2) from environmental water samples. The investigation into the synthesized adsorbent contained an examination of its morphology, chemical composition, structural attributes, and magnetic properties. This comprehensive analysis was conducted using various instrumental techniques, including Fourier transform-infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), Raman spectroscopy, X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), Barrett-Joyner-Halenda (BJH), and vibrating sample magnetometry (VSM). The adsorbent surface was activated by adding cetyltrimethylammonium bromide (CTAB) to the sample solution. To improve the selectivity and sensitivity of the method, nitrite ions were reacted with sulfanilic acid and chromotropic acid sequentially. An orange-red azo-dye complex was formed in the presence of nitrite ions with a clear absorbance peak at 514 nm. The effect of the main experimental parameters such as the pH of the sample solution, adsorbent dosage, and CTAB dosage was explored, and the optimization process was performed using a central composite design (CCD). The linear dynamic range (20–100 ng mL−1) was determined under optimal experimental circumstances, yielding a reasonable determination coefficient (R2, 0.9993), a detection limit of 5.12 ng mL−1, an enrichment factor of 167, and precision values of 1.0% intraday and 2.9% inter-day. The methodology successfully identified minute nitrite ions in environmental water samples with relative recoveries that varied between 96.05 and 101.6 ng mL−1. Full article
(This article belongs to the Collection Green and Environmentally Sustainable Chemical Processes)
Show Figures

Figure 1

Open Access Journals

Browse by Indexing Browse by Subject Selected Journals
Back to TopTop