In this article, we address the problem of synchronizing multiple analog-to-digital converter (ADC) and digital-to-analog converter (DAC) chains in a multi-channel system, which is constrained by the sampling frequency and inconsistencies among the components during system integration. To evaluate and compensate for the synchronization differences, we propose a pulse compression shape-based algorithm to measure the entire delay parameter of the ADC/DAC chain, which achieves sub-sampling resolution by mapping the shape of the discrete pulse compression peak to the signal propagation delay. Moreover, owing to the matched filtering in the pulse compression process, the algorithm exhibits good noise performance and is suitable for wireless scenarios. Experiments verified that the algorithm can achieve precise measurements with sub-sampling resolution in scenarios where the signal-to-noise ratio (SNR) is greater than −10 dB. Full article

The proliferation of invasive plant species poses a significant ecological threat, necessitating effective mapping strategies for control and conservation efforts. Existing studies employing unmanned aerial vehicles (UAVs) and multispectral (MS) sensors in complex natural environments have predominantly relied on classical machine learning (ML) models for mapping plant species in natural environments. However, a critical gap exists in the literature regarding the use of deep learning (DL) techniques that integrate MS data and vegetation indices (VIs) with different feature extraction techniques to map invasive species in complex natural environments. This research addresses this gap by focusing on mapping the distribution of the Broad-leaved pepper (BLP) along the coastal strip in the Sunshine Coast region of Southern Queensland in Australia. The methodology employs a dual approach, utilising classical ML models including Random Forest (RF), eXtreme Gradient Boosting (XGBoost), and Support Vector Machine (SVM) in conjunction with the U-Net DL model. This comparative analysis allows for an in-depth evaluation of the performance and effectiveness of both classical ML and advanced DL techniques in mapping the distribution of BLP along the coastal strip. Results indicate that the DL U-Net model outperforms classical ML models, achieving a precision of 83%, recall of 81%, and F1–score of 82% for BLP classification during training and validation. The DL U-Net model attains a precision of 86%, recall of 76%, and F1–score of 81% for BLP classification, along with an Intersection over Union (IoU) of 68% on the separate test dataset not used for training. These findings contribute valuable insights to environmental conservation efforts, emphasising the significance of integrating MS data with DL techniques for the accurate mapping of invasive plant species. Full article

The massive amount of human biological, imaging, and clinical data produced by multiple and diverse sources necessitates integrative modeling approaches able to summarize all this information into answers to specific clinical questions. In this paper, we present a hypermodeling scheme able to combine models of diverse cancer aspects regardless of their underlying method or scale. Describing tissue-scale cancer cell proliferation, biomechanical tumor growth, nutrient transport, genomic-scale aberrant cancer cell metabolism, and cell-signaling pathways that regulate the cellular response to therapy, the hypermodel integrates mutation, miRNA expression, imaging, and clinical data. The constituting hypomodels, as well as their orchestration and links, are described. Two specific cancer types, Wilms tumor (nephroblastoma) and non-small cell lung cancer, are addressed as proof-of-concept study cases. Personalized simulations of the actual anatomy of a patient have been conducted. The hypermodel has also been applied to predict tumor control after radiotherapy and the relationship between tumor proliferative activity and response to neoadjuvant chemotherapy. Our innovative hypermodel holds promise as a digital twin-based clinical decision support system and as the core of future in silico trial platforms, although additional retrospective adaptation and validation are necessary. Full article

Background: Immune checkpoint inhibition has revolutionized melanoma therapy, but many patients show primary or secondary resistance. Biomarkers are, therefore, urgently required to predict response prior to the initiation of therapy and to monitor disease progression. Methods: In this prospective study, we analyzed the serum C-C motif chemokine ligand 20 (CCL20) concentration using an enzyme-linked immunosorbent assay. Blood was obtained at baseline before the initiation of immunotherapy with anti-PD-1 monotherapy or Nivolumab and Ipilimumab in advanced melanoma patients (stages III and IV) enrolled at the University Medical Center Hamburg-Eppendorf. The CCL20 levels were correlated with clinico-pathological parameters and disease-related outcomes. Results: An increased C-C motif chemokine ligand 20 (CCL20) concentration (≥0.34 pg/mL) at baseline was associated with a significantly impaired progression-free survival (PFS) in the high-CCL20 group (3 months (95% CI: 2–6 months) vs. 11 months (95% CI: 6–26 months)) (p = 0.0033) and could be identified as an independent negative prognostic factor for PFS in univariate (Hazard Ratio (HR): 1.98, 95% CI 1.25–3.12, p = 0.004) and multivariate (HR: 1.99, 95% CI 1.21–3.29, p = 0.007) Cox regression analysis, which was associated with a higher risk than S100 (HR: 1.74). Moreover, high CCL20 levels were associated with impaired overall survival (median OS not reached for low-CCL20 group, p = 0.042) with an HR of 1.85 (95% CI 1.02–3.37, p = 0.043) in univariate analysis similar to the established prognostic marker S100 (HR: 1.99, 95% CI: 1.02–3.88, p = 0.043). Conclusions: CCL20 may represent a novel blood-based biomarker for the prediction of resistance to immunotherapy that can be used in combination with established strong clinical predictors (e.g., ECOG performance score) and laboratory markers (e.g., S100) in advanced melanoma patients. Future prospective randomized trials are needed to establish CCL20 as a liquid biopsy-based biomarker in advanced melanoma. Full article

This study explores cryptocurrency investment strategies by adapting the robust framework of factor investing, traditionally applied in equity markets, to the distinctive landscape of cryptocurrency assets. It conducts an in-depth examination of 31 prominent cryptocurrencies from December 2017 to December 2023, employing the Fama–MacBeth regression method and portfolio regressions to assess the predictive capabilities of market, size, value, and momentum factors, adjusted for the unique characteristics of the cryptocurrency market. These characteristics include high volatility and continuous trading, which differ markedly from those of traditional financial markets. To address the challenges posed by the perpetual operation of cryptocurrency trading, this study introduces an innovative rebalancing strategy that involves weekly adjustments to accommodate the market’s constant fluctuations. Additionally, to mitigate issues like autocorrelation and heteroskedasticity in financial time series data, this research applies the Newey–West standard error approach, enhancing the robustness of regression analyses. The empirical results highlight the significant predictive power of momentum and value factors in forecasting cryptocurrency returns, underscoring the importance of tailoring conventional investment frameworks to the cryptocurrency context. This study not only investigates the applicability of factor investing in the rapidly evolving cryptocurrency market, but also enriches the financial literature by demonstrating the effectiveness of combining Fama–MacBeth cross-sectional analysis with portfolio regressions, supported by Newey–West standard errors, in mastering the complexities of digital asset investments. Full article

When treating municipal wastewater, nitrogen removal is often limited due to low C/N, which needs to be compensated for by additional carbon source injections. This study investigated the feasibility of using industrial-waste polyglycolic acid (PGA) as a carbon source for denitrification in an SBR to obtain an economical carbon source. The results revealed that an optimal denitrification performance in a methanol-fed activated sludge system was achieved with a PGA dosage of 1.2 mL/L, a pH of 7–8, and a dissolved-oxygen (DO) concentration of 3 ± 0.5 mg/L. Under these conditions, all quality parameters for effluent water met the required criteria [COD < 50 mg/L; TN < 15 mg/L; NH₄⁺-N < 5(8) mg/L]. PGA enhanced the variety and richness of microbial communities, thereby markedly increasing the relative abundance of major phyla such as Proteobacteria and Bacteroidota and major genera such as Paracoccus and Dechloromonas. Furthermore, PGA upregulated the expression of nitrogen-metabolism-related genera, including amo, hao, nar, and nor, which improved the denitrification performance of the system. This study provides a reference for applying PGA as a carbon source for low-C/N-wastewater treatment and solid-waste utilization. Full article

Prunella vulgaris (PV) is one of the most commonly used nutraceuticals as it has been proven to have anti-inflammatory and antioxidant properties. The aim of this study was to evaluate the phytochemical composition of PV and its in vivo antioxidant properties. A phytochemical analysis measuring the total phenolic content (TPC), the identification of phenolic compounds by HPLC-DAD-ESI, and the evaluation of the in vitro antioxidant activity by the DPPH assay of the extract were performed. The antioxidant effects on inflammation induced by turpentine oil were experimentally tested in rats. Seven groups with six animals each were used: a control group, the experimental inflammation treatment group, the experimental inflammation and diclofenac sodium (DS) treatment group, and four groups with their inflammation treated using different dilutions of the extract. Serum redox balance was assessed based on total oxidative status (TOS), nitric oxide (NO), malondialdehyde (MDA), total antioxidant capacity (TAC), total thiols, and an oxidative stress index (OSI) contents. The TPC was 0.28 mg gallic acid equivalents (GAE)/mL extract, while specific representatives were represented by caffeic acid, p-coumaric acid, dihydroxybenzoic acid, gentisic acid, protocatechuic acid, rosmarinic acid, vanillic acid, apigenin–glucuronide, hesperidin, kaempferol–glucuronide. The highest amount (370.45 μg/mL) was reported for hesperidin, which is a phenolic compound belonging to the flavanone subclass. The antioxidant activity of the extracts, determined using the DPPH assay, was 27.52 mmol Trolox/mL extract. The PV treatment reduced the oxidative stress by lowering the TOS, OSI, NO, and MDA and by increasing the TAC and thiols. In acute inflammation, treatment with the PV extract reduced oxidative stress, with lower concentrations being more efficient and having a better effect than DS. Full article

This paper investigates the performance of coplanar waveguide (CPW) structures loaded with symmetric circular and polygonal split-ring resonators (SRRs) for microwave and RF applications, leveraging their unique electromagnetic properties. These properties make them suitable for metamaterials, sensors, filters, resonators, antennas, and communication systems. The objectives of this study are to analyze the impact of different SRR shapes on the transmission characteristics of CPWs and to explore their potential for realizing compact and efficient microwave components. The CPW-SRR structures are fabricated on a dielectric substrate, and their transmission properties and spectrogram are experimentally characterized in the frequency range of 4 GHz to 10 GHz with the rotation angles of the SRR gap. The simulation results demonstrate that the resonant frequencies and magnitude of the transmission coefficient of the CPW-SRR structures are influenced by the geometry of the SRR shapes and the rotation angles of the SRR gap, with certain shapes exhibiting enhanced performance characteristics compared to others. Moreover, the symmetric circular and polygonal SRRs offer design flexibility and enable the realization of miniaturized microwave components with improved performance metrics. Overall, this study provides valuable insights into the design and optimization of CPW-based microwave circuits utilizing symmetric SRR shapes, paving the way for advancements in the miniaturization and integration of RF systems. Full article

The objective of this research is to enhance the high-temperature antirutting and antiaging characteristics of bioasphalt. In this study, silica fume (SF) was selected to modify bioasphalt. The dosage of bio-oil in bioasphalt was 5%, and the dosage of SF was 2%, 4%, 6%, 8%, and 10% of bioasphalt. The high- and low-temperature characteristics, aging resistance, and temperature sensitivity of Bio + SF were evaluated by temperature sweep (TS), the multiple stress creep recovery (MSCR) test, the bending beam rheology (BBR) test, and the viscosity test. Meanwhile, the road behavior of the Bio + SF mixture was evaluated using the rutting test, low-temperature bending beam test, freeze–thaw splitting test, and fatigue test. The experimental results showed that the dosage of SF could enhance the high-temperature rutting resistance, aging resistance, and temperature stability of bioasphalt. The higher the dosage of SF, the more significant the enhancement effect. However, incorporating SF weakened bioasphalt’s low-temperature cracking resistance properties. When the SF dosage was less than 8%, the low-temperature cracking resistance of Bio + SF was still superior to that of matrix asphalt. Compared with matrix asphalt mixtures, the dynamic stability, destructive strain, freeze–thaw splitting strength ratio, and fatigue life of 5%Bio + 8%SF mixtures increased by 38.4%, 49.1%, 5.9%, and 68.9%, respectively. This study demonstrates that the development of SF-modified bioasphalt could meet the technical requirements of highway engineering. Using SF and bio-oil could decrease the consumption of natural resources and positively reduce environmental pollution. Full article

(1) Background: This study evaluates the predictive effectiveness of biomarkers in diagnosing newborn sepsis. (2) Methods: This was a case–control study conducted on neonates hospitalized at the Clinical Hospital “Louis Turcanu”, Timisoara, Romania, from October 2018 to July 2023. Using a vacutainer collection device, venous blood was collected at admission for complete blood tests, including ferritin, hemoglobin, LDH, and blood culture analysis. Neonates were divided into two groups: sepsis-positive and sepsis-negative. The outcome of interest was a diagnosis of sepsis. (3) Results: Data from 86 neonates, 51 of whom had been confirmed to have sepsis, were analyzed. This study found no significant difference in gestational age, infant weight, fetal growth restriction, or APGAR score between neonates with and without sepsis. However, there was a higher incidence of sepsis among neonates delivered via cesarean section. Neonatal patients with sepsis showed significantly higher levels of neonatal serum ferritin and LDH compared to those without sepsis. Ferritin and LDH biomarkers demonstrated excellent discriminatory capabilities in diagnosing neonatal sepsis. Logistic regression analysis revealed a significant association between elevated ferritin and LDH levels and the likelihood of neonatal sepsis, while anemia did not show a significant association. (4) Conclusions: LDH and ferritin concentrations are found to be predictive biomarkers for neonatal sepsis, indicating a potential role in detecting susceptible neonates and implementing prompt interventions to improve patient outcomes. Full article

There is a growing interest in the production of bioinks that on the one hand, are biocompatible and, on the other hand, have mechanical properties that allow for the production of stable constructs that can survive for a long time after transplantation. While the selection of the right material is crucial for bioprinting, there is another equally important issue that is currently being extensively researched—the incorporation of the vascular system into the fabricated scaffolds. Therefore, in the following manuscript, we present the results of research on bioink with unique physico-chemical and biological properties. In this article, two methods of seeding cells were tested using bioink B and seeding after bioprinting the whole model. After 2, 5, 8, or 24 h of incubation, the flow medium was used in the tested systems. At the end of the experimental trial, for each time variant, the canals were stored in formaldehyde, and immunohistochemical staining was performed to examine the presence of cells on the canal walls and roof. Cells adhered to both ways of fiber arrangement; however, a parallel bioprint with the 5 h incubation and the intermediate plating of cells resulted in better adhesion efficiency. For this test variant, the percentage of cells that adhered was at least 20% higher than in the other analyzed variants. In addition, it was for this variant that the lowest percentage of viable cells was found that were washed out of the tested model. Importantly, hematoxylin and eosin staining showed that after 8 days of culture, the cells were evenly distributed throughout the canal roof. Our study clearly shows that neovascularization-promoting cells effectively adhere to ECM-based pancreatic bioink. Summarizing the presented results, it was demonstrated that the proposed bioink compositions can be used for bioprinting bionic organs with a vascular system formed by endothelial cells and fibroblasts. Full article

Lead-free K_0.5Bi_0.5TiO₃ (KBT) ceramics with high density (~5.36 g/cm³, 90% of X-ray density) and compositional purity (up to 90%) were synthesized using a solid-state reaction method. Strongly condensed KBT ceramics revealed homogenous local microstructures. TG/DSC (Thermogravimetry-differential scanning calorimetry) techniques characterized the thermal and structural stability of KBT. High mass stability (>0.4%) has proven no KBT thermal decomposition or other phase precipitation up to 1000 °C except for the co-existing K₂Ti₆O₁₃ impurity. A strong influence of crystallites size and sintering conditions on improved dielectric and non-linear optical properties was reported. A significant increase (more than twice) in dielectric permittivity (ε_R), substantial for potential applications, was found in the KBT-24h specimen with extensive milling time. Moreover, it was observed that the second harmonic generation (λ_SHG = 532 nm) was activated at remarkably low fundamental beam intensity. Finally, spectroscopic experiments (Fourier transform Raman and far-infrared spectroscopy (FT-IR)) were supported by DFT (Density functional theory) calculations with a 2 × 2 × 2 supercell (P4₂mc symmetry and C4v point group). Moreover, the energy band gap was calculated (E_g = 2.46 eV), and a strong hybridization of the O-2p and Ti-3d orbitals at E_g explained the nature of band-gap transition (Γ → Γ). Full article

Salt stress has a detrimental impact on food crop production, with its severity escalating due to both natural and man-made factors. As one of the most important food crops, wheat is susceptible to salt stress, resulting in abnormal plant growth and reduced yields; therefore, damage from salt stress should be of great concern. Additionally, the utilization of land in coastal areas warrants increased attention, given diminishing supplies of fresh water and arable land, and the escalating demand for wheat. A comprehensive understanding of the physiological and molecular changes in wheat under salt stress can offer insights into mitigating the adverse effects of salt stress on wheat. In this review, we summarized the genes and molecular mechanisms involved in ion transport, signal transduction, and enzyme and hormone regulation, in response to salt stress based on the physiological processes in wheat. Then, we surveyed the latest progress in improving the salt tolerance of wheat through breeding, exogenous applications, and microbial pathways. Breeding efficiency can be improved through a combination of gene editing and multiple omics techniques, which is the fundamental strategy for dealing with salt stress. Possible challenges and prospects in this process were also discussed. Full article

Food poisoning caused by Staphylococcal enterotoxins (SEs) is prevalent globally, making efficient detection of these toxins very important. Traditionally, liquid chromatography–mass spectrometry required immunosorbent enrichment by magnetic bead-coupled antibodies obtained by animal-specific immunization. However, this method is time-consuming and costly. In this study, two recombinant protein capture molecules were designed based on the principle of toxins binding to Major Histocompatibility Complex (MHCII) and T cell receptor (TCR) molecules. The two capture molecules are called MHCII and MHCII-D10. The design of the MHCII and TCR-D10 was achieved through searching for the binding site protein sequence of Staphylococcal enterotoxins in the relevant literature, and MHCII-D10 was to link MHCII sequence with TCR-D10 sequence using linker (G4S)3 linking peptide. These capture molecules were shown to effectively bind to seven types of toxins and to capture SEs in various matrices. The digestion time, ratio, and temperature were further optimized, reducing the overall digestion time to just 2 h. The specificity, linearity, sensitivity, precision (RSD%), and recovery of the two methods were verified by liquid chromatography–mass spectrometry. When the MHCII and MHCII-D10 captured the toxins, the limit of quantification (LOD) in the 1 × PBS, plasma, and milk matrices ranged from 1.5625 to 100 fmol/µL, with the recovery rate ranging from 18.4% to 96%. The design of these capture molecules eliminates the need for animal-specific immunization, simplifying the pre-detection process and avoiding ethical concerns. This development holds significant promise for clinical diagnosis and reference. Full article

Stratified Taylor–Couette flow (STCF) undergoes transient growth. Recent studies have shown that there exists transient amplification in the linear regime of counter-rotating STCF. The kinetic budget of the optimal transient perturbation is analysed numerically to simulate the interaction of the shear production (SP), buoyancy flux (BP), and other energy components that contributes to the total optimal transient kinetic energy. These contributions affect the total energy by influencing the perturbation to extract kinetic energy (KE) from the mean flow. The decay of the amplification factor resulted from the positive amplification of both BP and SP, while the growth is attributed to the negative and positive amplification of BP and SP, respectively. The optimal SP is positively amplified, implying that there is the possibility of constant linear growth. These findings agree with the linear growth rate for increasing values of Grashof number. Full article

The current investigations were aimed at the determination of the hydrolytic and oxidative stability of commercial pomegranate seed oils provided by four different producers, and to assess the oils’ primary quality parameters. During storage, many changes occur in oils that can significantly affect their quality. The oils were tested for acid and peroxide values, fatty acid profile, and their distribution between the sn-1,3 and sn-2 positions of triacylglycerols. The oxidative stability was also determined, and melting curves were plotted for the oils. The analyzed oils were stored for one month in a dark place at refrigerator temperature. Based on the obtained results, it was found that the acid values for most oils did not exceed the permissible level determined by the Codex Alimentarius. However, in all oils, the peroxide value exceeded the permissible level set by the standard EN ISO 3960:2017-03 and the Codex Alimentarius after the one-month storage period. The examined pomegranate seed oils were found to be valuable sources of polyunsaturated fatty acids, especially punicic acid, which was the most abundant fatty acid present in these oils. In all analyzed oils, linoleic acid predominated in the sn-2 position of the triacylglycerols. Pomegranate seed oils did not exhibit good oxidative stability, as the oxidation induction times for all tested oils were very short. The storage period significantly affected the content of the primary oxidation products and oxidative stability of the oils. Full article

Colored varieties of turkeys, such as the broad-breasted Bronze, not currently subject to intensive breeding work, are kept only in amateur breeding and treated rather as ornamental poultry. They are raised in extensive systems, which undoubtedly affects the quality of the meat obtained. Consumers are looking for meat with specific and unique sensory qualities; hence, the interest in meat from turkeys with a slower-than-typical growth rate, such as the broad-breasted Bronze, is justified. The object of this research was to analyze the physicochemical properties and nutritional value (amino acid, fatty acid, and antioxidant profile) of the breast and thigh muscles of broad-breasted Bronze turkeys with regard to gender. It was shown that gender had little effect on muscle chemical composition, amino acid, and fatty acid content (p > 0.05), as well as most oxido-reduction indices. However, significant differences were noted in muscle quality traits such as color brightness (L*; turkeys > indors; p = 0.023), proportion of red (a*; turkeys < indors; p = 0.048) and yellow (b*; turkeys > indors; p = 0.039), and water absorption (turkeys < indors; p = 0.009). The type of muscle also had a significant effect on quality characteristics. Higher a*, b*, C*, pH, water absorption, and thermal leakage were shown in the femoral muscle (p < 0.001), while L* and h were higher in the pectoral muscle (p < 0.001). Turkey meat was characterized by a high proportion of unsaturated fatty acids (MUFA + PUFA ~68%), favorable FA index values, and low lipid oxidation indices. Thigh muscles (especially turkey) were more caloric, and contained significantly (p < 0.001) more fat and all major FA groups. Breast muscles (especially of turkeys) were characterized by a high protein content (about 25%) and a high proportion of essential amino acids. The data obtained indicate that broad-breasted Bronze turkeys can provide high-quality meat, and are an excellent option for meeting modern consumer needs. Full article

With the increasing demand for decentralized systems and the widespread usage of blockchain, low throughput and high latency have become the biggest stumbling blocks in the development of blockchain systems. This problem seriously hinders the expansion of blockchain and its application in production. Most existing smart contract scheduling solutions use static feature analysis to prevent contract conflicts during parallel execution. However, the conflicts between transactions are complex; static feature analysis is not accurate enough. In this paper, we first build the dependency between smart contracts by analyzing the features. After numerous experiments, we propose a conflict model to adjust the relationship between threads and conflict to achieve high throughput and low latency. Based on these works, we propose adaptive parallel scheduling for smart contracts on the blockchain. Our adaptive parallel scheduling can distinguish conflicts between smart contracts and dynamically adjust the execution strategy of smart contracts based on the conflict factors we define. We implement our scheme on ChainMaker, one of the most popular open-source permissioned blockchains, and build experiments to verify our solution. Regarding latency, our solution demonstrates remarkable efficiency compared with the fully parallel scheme, particularly in high-conflict transaction scenarios, where our solution achieves latency levels just one-twentieth of the fully parallel scheme. Regarding throughput, our solution significantly outperforms the fully parallel scheme, achieving 30 times higher throughput in high-conflict transaction scenarios. These results highlight the superior performance and effectiveness of our solution in addressing latency and throughput challenges, particularly in environments with high transaction conflicts. Full article

Spalling is a widespread dynamic disaster during blasting excavation in underground engineering. To clarify the coupled dynamic response and spalling behavior of an underground tunnel with a spray anchor, an investigation based on the rock–shotcrete combination was conducted using theoretical and numerical methods. The mathematical representation of stress wave propagation between rock and shotcrete was deduced based on the elastic stress wave theory. A novel method for predicting the location and time of initial spalling in a rock–shotcrete combination was proposed. A numerical simulation was conducted to verify the validity of the proposed theoretical method. In addition, the effect of the material’s tensile strength, the loading amplitude, and the thickness of shotcrete on the stress evolution and spalling characteristics was studied. The results demonstrate that the initial spalling locations are sensitive to the relationship between the normalized tensile strength of the rock, shotcrete, and interface. A high incident amplitude can cause the initial spalling in rock, and the shotcrete or rock–shotcrete interface can cause initial spalling due to a low incident amplitude. The stress evolution and spalling characteristics are sensitive to the thickness of shotcrete. The location of the initial spalling failure changes with the thickness of the shotcrete. An appropriate increment in thickness and normalized strength of the shotcrete is beneficial to the dynamic stability of underground engineering. Full article

Structural health monitoring is an effective method to evaluate the safety status of dams. Measurement error is an important factor which affects the accuracy of monitoring data modeling. Processing the abnormal monitoring data before data analysis is a necessary step to ensure the reliability of the analysis. In this paper, we proposed a method to process the abnormal dam displacement monitoring data on the basis of matrix manipulation and Cuckoo Search algorithm. We first generate a scatter plot of the monitoring data and exported the matrix of the image. The scatter plot of monitoring data includes isolate outliers, clusters of outliers, and clusters of normal points. The gray scales of isolated outliers are reduced using Gaussian blur. Then, the isolated outliers are eliminated using Ostu binarization. We then use the Cuckoo Search algorithm to distinguish the clusters of outliers and clusters of normal points to identify the process line. To evaluate the performance of the proposed data processing method, we also fitted the data processed by the proposed method and by the commonly used 3-$\sigma$ method using a regression model, respectively. Results indicate that the proposed method has a better performance in abnormal detection compared with the 3-$\sigma$ method. Full article

Traditional methods for harvesting medicinal materials with long roots, like Astragalus membranaceus, require extensive soil excavation, leading to problems like inefficient soil separation, low stemming rates, and blockages in conveyor chains. To address these challenges, this study introduces a prototype machine capable of digging, separating soil, crushing soil, and collecting the medicinal materials in one continuous process. The paper focuses on the machine’s design and working principle, with theoretical analysis and calculations for key components like the digging shovel, multi-stage conveyor, and soil-crushing device. Specific structural parameters were determined, and the screening efficiency of the roller screen was analyzed using EDEM 2020 software, comparing scenarios with and without rollers. A motion model for the medicinal materials during conveyance was established, allowing for the determination of optimal linear velocity and mounting angle for the conveyor. Additionally, a motion model for the second-stage conveyor chain and rear soil-crushing device was used to optimize their placement, ensuring efficient soil crushing without affecting the thrown Astragalus. Compared to traditional Chinese medicine diggers, this machine boasts superior resistance reduction and soil-crushing capabilities. Compared with traditional harvesters, the drag-reducing and soil-crushing device of this machine is more efficient, reducing the damage to Astragalus during the harvesting process, reducing the labor intensity of farmers, and improving the quality and efficiency of Astragalus harvesting. Field experiments have shown that when the operating speed of the prototype is 1.0 m/s and the roller-screen speed is 130~150 rpm, the operating performance is optimal, and comparative experiments can be conducted under the optimal parameters. From the experimental results, it can be seen that the improved equipment has increased the bright-stem rate by about 4%, the digging and loosening rate by 97.42%, and the damage rate by 2.44%. The equipment design meets the overall design requirements, and all experimental indicators meet national and industry standards. This provides a reference for the optimization and improvement of the soil-crushing device and the structure of the Astragalus membranaceus harvester. Full article